@@ -28,6 +28,7 @@
#include <linux/mmc/sd.h>
#include <linux/mmc/card.h>
#include <linux/scatterlist.h>
+#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/rtsx_usb.h>
@@ -1324,7 +1325,7 @@ static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
- MMC_CAP_NEEDS_POLL | MMC_CAP_ERASE | MMC_CAP_SYNC_RUNTIME_PM;
+ MMC_CAP_ERASE | MMC_CAP_SYNC_RUNTIME_PM;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE |
MMC_CAP2_NO_SDIO;
@@ -1429,6 +1430,30 @@ static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int rtsx_usb_sdmmc_runtime_suspend(struct device *dev)
+{
+ struct rtsx_usb_sdmmc *host = dev_get_drvdata(dev);
+
+ host->mmc->caps &= ~MMC_CAP_NEEDS_POLL;
+ return 0;
+}
+
+static int rtsx_usb_sdmmc_runtime_resume(struct device *dev)
+{
+ struct rtsx_usb_sdmmc *host = dev_get_drvdata(dev);
+
+ host->mmc->caps |= MMC_CAP_NEEDS_POLL;
+ mmc_detect_change(host->mmc, 0);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops rtsx_usb_sdmmc_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(rtsx_usb_sdmmc_runtime_suspend,
+ rtsx_usb_sdmmc_runtime_resume, NULL)
+};
+
static const struct platform_device_id rtsx_usb_sdmmc_ids[] = {
{
.name = "rtsx_usb_sdmmc",
@@ -1444,6 +1469,7 @@ static struct platform_driver rtsx_usb_sdmmc_driver = {
.id_table = rtsx_usb_sdmmc_ids,
.driver = {
.name = "rtsx_usb_sdmmc",
+ .pm = &rtsx_usb_sdmmc_dev_pm_ops,
},
};
module_platform_driver(rtsx_usb_sdmmc_driver);
The rtsx USB parent device, has logic to detect when a card is inserted into the card slot. Although, the logic can't detect when a card is removed. This makes things a bit tricky, which is why the current method is simply to turn on MMC_CAP_NEEDS_POLL during probe. Using MMC_CAP_NEEDS_POLL means lots of energy being wasted, as the mmc host becomes runtime resumed frequently by the mmc core, while it polls for new cards being inserted. To address this problem, let's start relying on that the rtsx USB driver runtime resumes its child device, which is the rtsx_usb_sdmmc device, when it detects that a new card being inserted. This means dropping MMC_CAP_NEEDS_POLL from being set during probe. Instead let's implement a ->runtime_resume() callback to schedule a detect work and to set MMC_CAP_NEEDS_POLL. In this way, polling is enabled as long as there is card inserted, thus we can rely on the mmc core to detect also when the card becomes removed. Furthermore, to avoid polling forever after a card has been removed, let's implement a ->runtime_suspend() callback and make it clear MMC_CAP_NEEDS_POLL. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/host/rtsx_usb_sdmmc.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) -- 2.17.0