[09/10] mmc: pxa: Use GPIO descriptor for power

Message ID	20181112141239.19646-10-linus.walleij@linaro.org
State	Superseded
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of linux-mmc-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Linus Walleij <linus.walleij@linaro.org> To: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org>, Daniel Mack <daniel@zonque.org>, Robert Jarzmik <robert.jarzmik@free.fr>, Bartosz Golaszewski <brgl@bgdev.pl>, Andrea Adami <andrea.adami@gmail.com> Subject: [PATCH 09/10] mmc: pxa: Use GPIO descriptor for power Date: Mon, 12 Nov 2018 15:12:38 +0100 Message-Id: <20181112141239.19646-10-linus.walleij@linaro.org> In-Reply-To: <20181112141239.19646-1-linus.walleij@linaro.org> References: <20181112141239.19646-1-linus.walleij@linaro.org> Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk
Series	Convert MMC slot GPIO to descriptors \| expand [00/10] Convert MMC slot GPIO to descriptors [01/10] mmc: slot-gpio: Allocate GPIO labels dynamically [02/10] mmc: jz4740: Get CD/WP GPIOs from descriptors [03/10] mmc: jz4740: Use GPIO descriptor for power [04/10] mmc: spi: Convert to use GPIO descriptors [05/10] mmc: host: tmio: Use GPIO descriptors [06/10] mmc: sdhci: imx: Use the slot GPIO descriptor [07/10] mmc: s3cmci: Use the slot GPIO descriptor [08/10] mmc: pxa: Use the slot GPIO descriptor [09/10] mmc: pxa: Use GPIO descriptor for power [10/10] mmc: slot-gpio: Delete legacy GPIO handling

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 612109c515da..4bcbd3d55b36 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -290,7 +290,6 @@ static unsigned long balloon3_mmc_pin_config[] __initdata = { static struct pxamci_platform_data balloon3_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, .detect_delay_ms = 200, }; diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 8c530fcd87d9..fe9665b64e2f 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -284,8 +284,6 @@ static inline void cmx270_init_ohci(void) {} #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static struct pxamci_platform_data cmx270_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = GPIO105_MMC_POWER, - .gpio_power_invert = 1, }; static struct gpiod_lookup_table cmx270_mci_gpio_table = { @@ -293,6 +291,8 @@ static struct gpiod_lookup_table cmx270_mci_gpio_table = { .table = { /* Card detect on GPIO 83 */ GPIO_LOOKUP("gpio-pxa", 83, "cd", GPIO_ACTIVE_LOW), + /* Power on GPIO 105 */ + GPIO_LOOKUP("gpio-pxa", 105, "power", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 93a2d5b58f84..57ded62e1e52 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -454,7 +454,6 @@ static inline void cm_x300_init_nand(void) {} static struct pxamci_platform_data cm_x300_mci_platform_data = { .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static struct gpiod_lookup_table cm_x300_mci_gpio_table = { @@ -486,7 +485,6 @@ static struct pxamci_platform_data cm_x300_mci2_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = cm_x300_mci2_init, .exit = cm_x300_mci2_exit, - .gpio_power = -1, }; static void __init cm_x300_init_mmc(void) diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 3554e6befbb8..5cd4dcd9413b 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -49,7 +49,6 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data income_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, .detect_delay_ms = 200, }; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index d57a3738a200..c9732cace5e3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -494,7 +494,6 @@ static struct platform_device corgi_audio_device = { static struct pxamci_platform_data corgi_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = CORGI_GPIO_SD_PWR, }; static struct gpiod_lookup_table corgi_mci_gpio_table = { @@ -506,6 +505,9 @@ static struct gpiod_lookup_table corgi_mci_gpio_table = { /* Write protect on GPIO 7 */ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP, "wp", GPIO_ACTIVE_LOW), + /* Power on GPIO 33 */ + GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR, + "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index f00e0c12f63e..e26e7e60a169 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -129,7 +129,6 @@ static struct pxamci_platform_data csb726_mci = { .detect_delay_ms = 500, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, /* FIXME setpower */ - .gpio_power = -1, }; static struct gpiod_lookup_table csb726_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index e41d94e3c2c3..32c1edeb3f14 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -630,7 +630,6 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, .exit = em_x270_mci_exit, - .gpio_power = -1, }; static void __init em_x270_init_mmc(void) diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index fef80dc401de..4764acca5480 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -90,7 +90,6 @@ static struct platform_device *devices[] __initdata = { #ifdef CONFIG_MMC_PXA static struct pxamci_platform_data gumstix_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static void __init gumstix_mmc_init(void) diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index a03b23c2fee9..7bfc246a1d75 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -160,7 +160,6 @@ static struct pxafb_mach_info sharp_lm8v31 = { static struct pxamci_platform_data idp_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static void __init idp_init(void) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 704a0effba3d..4f720f77572b 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -276,7 +276,6 @@ static inline void littleton_init_keypad(void) {} static struct pxamci_platform_data littleton_mci_platform_data = { .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, }; static struct gpiod_lookup_table littleton_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 469cbc6b747f..c576e8462043 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -440,7 +440,6 @@ static struct pxamci_platform_data lubbock_mci_platform_data = { .init = lubbock_mci_init, .get_ro = lubbock_mci_get_ro, .exit = lubbock_mci_exit, - .gpio_power = -1, }; static void lubbock_irda_transceiver_mode(struct device *dev, int mode) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 3e515394b20a..ee1a49c95e40 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -776,7 +776,6 @@ static struct pxamci_platform_data magician_mci_info = { .init = magician_mci_init, .exit = magician_mci_exit, .gpio_card_ro_invert = 1, - .gpio_power = EGPIO_MAGICIAN_SD_POWER, }; static struct gpiod_lookup_table magician_mci_gpio_table = { @@ -788,6 +787,12 @@ static struct gpiod_lookup_table magician_mci_gpio_table = { * 4, so we need offset 8+4=12 on that particular chip. */ GPIO_LOOKUP("htc-egpio-1", 12, "wp", GPIO_ACTIVE_HIGH), + /* + * Power on EGPIO register 2 index 0, so this is on + * the first HTC EGPIO chip starting at register 0 so we + * need offset 2*8+0 = 16 on that chip. + */ + GPIO_LOOKUP("htc-egpio-0", 16, "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 31142b17d845..9e39fc2ad2d9 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -361,7 +361,6 @@ static struct pxamci_platform_data mainstone_mci_platform_data = { .init = mainstone_mci_init, .setpower = mainstone_mci_setpower, .exit = mainstone_mci_exit, - .gpio_power = -1, }; static void mainstone_irda_transceiver_mode(struct device *dev, int mode) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d2941c256233..589ac76002ff 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -398,7 +398,6 @@ struct gpio_vbus_mach_info gpio_vbus_data = { static struct pxamci_platform_data mioa701_mci_info = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = GPIO91_SDIO_EN, }; static struct gpiod_lookup_table mioa701_mci_gpio_table = { @@ -408,6 +407,8 @@ static struct gpiod_lookup_table mioa701_mci_gpio_table = { GPIO_LOOKUP("gpio-pxa", 15, "cd", GPIO_ACTIVE_LOW), /* Write protect on GPIO 78 */ GPIO_LOOKUP("gpio-pxa", 78, "wp", GPIO_ACTIVE_LOW), + /* Power on GPIO 91 */ + GPIO_LOOKUP("gpio-pxa", 91, "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index d1562e35644c..b2681d6ba562 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -326,7 +326,6 @@ static mfp_cfg_t mfp_cfg[] __initdata = { static struct pxamci_platform_data mxm_8x10_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .detect_delay_ms = 10, - .gpio_power = -1 }; static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 62b37fecfdcb..b94c45f65215 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -49,12 +49,8 @@ static struct pxamci_platform_data palm27x_mci_platform_data = { .detect_delay_ms = 200, }; -void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable, int power, - int power_inverted) +void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable) { - palm27x_mci_platform_data.gpio_power = power; - palm27x_mci_platform_data.gpio_power_invert = power_inverted; - if (gtable) gpiod_add_lookup_table(gtable); pxa_set_mci_info(&palm27x_mci_platform_data); diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h index 05e3f04c11e2..cd071f876132 100644 --- a/arch/arm/mach-pxa/palm27x.h +++ b/arch/arm/mach-pxa/palm27x.h @@ -15,13 +15,9 @@ #include <linux/gpio/machine.h> #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) -extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable, - int power, - int power_inverted); +extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable); #else -static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable, - int power, - int power_inverted) +static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable) {} #endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 63d81c1a3103..93d1124d21c2 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -327,6 +327,8 @@ static struct gpiod_lookup_table palmld_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; @@ -338,8 +340,7 @@ static void __init palmld_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palm27x_mmc_init(&palmld_mci_gpio_table, - GPIO_NR_PALMLD_SD_POWER, 0); + palm27x_mmc_init(&palmld_mci_gpio_table); palm27x_pm_init(PALMLD_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE); diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 81a37116081b..8811f11f670e 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -189,6 +189,8 @@ static struct gpiod_lookup_table palmt5_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; @@ -200,8 +202,7 @@ static void __init palmt5_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palm27x_mmc_init(&palmt5_mci_gpio_table, - GPIO_NR_PALMT5_SD_POWER, 0); + palm27x_mmc_init(&palmt5_mci_gpio_table); palm27x_pm_init(PALMT5_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 7b4c686de8c2..7ce4fc287115 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -120,7 +120,6 @@ static unsigned long palmtc_pin_config[] __initdata = { #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data palmtc_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = GPIO_NR_PALMTC_SD_POWER, .detect_delay_ms = 200, }; @@ -131,6 +130,8 @@ static struct gpiod_lookup_table palmtc_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 77cb2d98cbdd..e830005af8d0 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -102,7 +102,6 @@ static unsigned long palmte2_pin_config[] __initdata = { ******************************************************************************/ static struct pxamci_platform_data palmte2_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = GPIO_NR_PALMTE2_SD_POWER, }; static struct gpiod_lookup_table palmte2_mci_gpio_table = { @@ -112,6 +111,8 @@ static struct gpiod_lookup_table palmte2_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index ea44f699240f..70f1a8a3aa94 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -487,6 +487,8 @@ static struct gpiod_lookup_table treo680_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; @@ -496,8 +498,7 @@ static void __init treo680_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); palmphone_common_init(); treo680_gpio_init(); - palm27x_mmc_init(&treo680_mci_gpio_table, - GPIO_NR_TREO680_SD_POWER, 0); + palm27x_mmc_init(&treo680_mci_gpio_table); } #endif @@ -508,6 +509,8 @@ static struct gpiod_lookup_table centro685_mci_gpio_table = { .table = { GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER, + "power", GPIO_ACTIVE_LOW), { }, }, }; @@ -516,8 +519,7 @@ static void __init centro_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config)); palmphone_common_init(); - palm27x_mmc_init(&centro685_mci_gpio_table, - GPIO_NR_CENTRO_SD_POWER, 1); + palm27x_mmc_init(&centro685_mci_gpio_table); } #endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 9df7cd84ba7b..ef71bf2abb47 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -344,6 +344,8 @@ static struct gpiod_lookup_table palmtx_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_READONLY, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_POWER, + "power", GPIO_ACTIVE_HIGH), { }, }, }; @@ -355,8 +357,7 @@ static void __init palmtx_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palm27x_mmc_init(&palmtx_mci_gpio_table, - GPIO_NR_PALMTX_SD_POWER, 0); + palm27x_mmc_init(&palmtx_mci_gpio_table); palm27x_pm_init(PALMTX_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index febf5aadbde6..ea1c7b2ed8d4 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -393,6 +393,8 @@ static struct gpiod_lookup_table palmz72_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N, + "power", GPIO_ACTIVE_LOW), { }, }, }; @@ -407,8 +409,7 @@ static void __init palmz72_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - palm27x_mmc_init(&palmz72_mci_gpio_table, - GPIO_NR_PALMZ72_SD_POWER_N, 1); + palm27x_mmc_init(&palmz72_mci_gpio_table); palm27x_lcd_init(-1, &palm_320x320_lcd_mode); palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N, GPIO_NR_PALMZ72_USB_PULLUP, 0); diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f76d7665420e..be19e3a4eacc 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -370,7 +370,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = { .init = pcm990_mci_init, .setpower = pcm990_mci_setpower, .exit = pcm990_mci_exit, - .gpio_power = -1, }; static struct pxaohci_platform_data pcm990_ohci_platform_data = { diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 9b8663ac532f..c2a43d4cfd3e 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -289,7 +289,6 @@ static struct pxamci_platform_data poodle_mci_platform_data = { .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, - .gpio_power = -1, }; static struct gpiod_lookup_table poodle_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 19b988d6dc44..e1db072756f2 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -749,7 +749,6 @@ static struct pxamci_platform_data raumfeld_mci_platform_data = { .init = raumfeld_mci_init, .exit = raumfeld_mci_exit, .detect_delay_ms = 200, - .gpio_power = -1, }; /* diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 7a9fe1749d7a..306818e2cf54 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -616,7 +616,6 @@ static struct pxamci_platform_data spitz_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .setpower = spitz_mci_setpower, - .gpio_power = -1, }; static struct gpiod_lookup_table spitz_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 0bdb414daedd..e0d6c872270a 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -436,7 +436,6 @@ static int imote2_mci_get_ro(struct device *dev) static struct pxamci_platform_data imote2_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ .get_ro = imote2_mci_get_ro, - .gpio_power = -1, }; static struct gpio_led imote2_led_pins[] = { diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 934338b574da..e8a93c088c35 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -292,7 +292,6 @@ static struct pxamci_platform_data tosa_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = tosa_mci_init, .exit = tosa_mci_exit, - .gpio_power = TOSA_GPIO_PWR_ON, }; static struct gpiod_lookup_table tosa_mci_gpio_table = { @@ -302,6 +301,8 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = { "cd", GPIO_ACTIVE_LOW), GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON, + "power", GPIO_ACTIVE_HIGH), { }, }, }; diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 849f8b0e6651..c76f1daecfc9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -355,7 +355,6 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = { .exit = trizeps4_mci_exit, .get_ro = NULL, /* write-protection not supported */ .setpower = NULL, /* power-switching not supported */ - .gpio_power = -1, }; /**************************************************************************** diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 186c75161df8..829284406fa3 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -241,7 +241,6 @@ static void __init vpac270_onenand_init(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data vpac270_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, .detect_delay_ms = 200, }; diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index d2a63c16404e..e2353e75bb28 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -291,7 +291,6 @@ static inline void z2_lcd_init(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data z2_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, .detect_delay_ms = 200, }; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 8c71e47e33c4..897ef59fbe0c 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -664,7 +664,6 @@ static struct pxamci_platform_data zeus_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .detect_delay_ms = 250, .gpio_card_ro_invert = 1, - .gpio_power = -1 }; static struct gpiod_lookup_table zeus_mci_gpio_table = { diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 5617f17a91d0..8c8752f1684a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -227,7 +227,6 @@ static inline void zylonite_init_lcd(void) {} static struct pxamci_platform_data zylonite_mci_platform_data = { .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static struct gpiod_lookup_table zylonite_mci_gpio_table = { @@ -242,7 +241,6 @@ static struct gpiod_lookup_table zylonite_mci_gpio_table = { static struct pxamci_platform_data zylonite_mci2_platform_data = { .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static struct gpiod_lookup_table zylonite_mci2_gpio_table = { @@ -257,7 +255,6 @@ static struct gpiod_lookup_table zylonite_mci2_gpio_table = { static struct pxamci_platform_data zylonite_mci3_platform_data = { .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_power = -1, }; static struct gpiod_lookup_table zylonite_mci3_gpio_table = { diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index a8b6c14f2687..8779bbaa6b69 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -30,7 +30,7 @@ #include <linux/mmc/slot-gpio.h> #include <linux/io.h> #include <linux/regulator/consumer.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/gfp.h> #include <linux/of.h> #include <linux/of_device.h> @@ -63,6 +63,7 @@ struct pxamci_host { unsigned int power_mode; unsigned long detect_delay_ms; bool use_ro_gpio; + struct gpio_desc *power; struct pxamci_platform_data *pdata; struct mmc_request *mrq; @@ -101,16 +102,13 @@ static inline int pxamci_set_power(struct pxamci_host *host, { struct mmc_host *mmc = host->mmc; struct regulator *supply = mmc->supply.vmmc; - int on; if (!IS_ERR(supply)) return mmc_regulator_set_ocr(mmc, supply, vdd); - if (host->pdata && - gpio_is_valid(host->pdata->gpio_power)) { - on = ((1 << vdd) & host->pdata->ocr_mask); - gpio_set_value(host->pdata->gpio_power, - !!on ^ host->pdata->gpio_power_invert); + if (host->power) { + bool on = !!((1 << vdd) & host->pdata->ocr_mask); + gpiod_set_value(host->power, on); } if (host->pdata && host->pdata->setpower) @@ -730,21 +728,12 @@ static int pxamci_probe(struct platform_device *pdev) } if (host->pdata) { - int gpio_power = host->pdata->gpio_power; - host->detect_delay_ms = host->pdata->detect_delay_ms; - if (gpio_is_valid(gpio_power)) { - ret = devm_gpio_request(dev, gpio_power, - "mmc card power"); - if (ret) { - dev_err(dev, - "Failed requesting gpio_power %d\n", - gpio_power); - goto out; - } - gpio_direction_output(gpio_power, - host->pdata->gpio_power_invert); + host->power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(host->power)) { + dev_err(dev, "Failed requesting gpio_power\n"); + goto out; } /* FIXME: should we pass detection delay to debounce? */ @@ -768,7 +757,7 @@ static int pxamci_probe(struct platform_device *pdev) if (host->pdata->init) host->pdata->init(dev, pxamci_detect_irq, mmc); - if (gpio_is_valid(gpio_power) && host->pdata->setpower) + if (host->power && host->pdata->setpower) dev_warn(dev, "gpio_power and setpower() both defined\n"); if (host->use_ro_gpio && host->pdata->get_ro) dev_warn(dev, "gpio_ro and get_ro() both defined\n"); diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index db6c247d42d1..7e44e84e7150 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -16,8 +16,6 @@ struct pxamci_platform_data { int (*setpower)(struct device *, unsigned int); void (*exit)(struct device *, void *); bool gpio_card_ro_invert; /* gpio ro is inverted */ - int gpio_power; /* gpio powering up MMC bus */ - bool gpio_power_invert; /* gpio power is inverted */ }; extern void pxa_set_mci_info(struct pxamci_platform_data *info);

[09/10] mmc: pxa: Use GPIO descriptor for power

Commit Message

Patch