diff mbox series

[07/12] mmc: core: Update CMD13 busy check for CMD6 commands

Message ID 20200204085449.32585-8-ulf.hansson@linaro.org
State New
Headers show
Series mmc: core: Improve code for polling and HW busy detect | expand

Commit Message

Ulf Hansson Feb. 4, 2020, 8:54 a.m. UTC
Through mmc_poll_for_busy() a CMD13 may be sent to get the status of the
(e)MMC card. If the state of the card is R1_STATE_PRG, the card is
considered as being busy, which means we continue to poll with CMD13. This
seems to be sufficient, but it's also unnecessary fragile, as it means a
new command/request could potentially be sent to the card when it's in an
unknown state.

To try to improve the situation, but also to move towards a more consistent
CMD13 polling behaviour in the mmc core, let's deploy the same policy we
use for regular I/O write requests. In other words, let's check that card
returns to the R1_STATE_TRAN and that the R1_READY_FOR_DATA bit is set in
the CMD13 response, before exiting the polling loop.

Note that, potentially this changed behaviour could lead to unnecessary
waiting for the timeout to expire, if the card for some reason, moves to an
unexpected error state. However, as we bail out from the polling loop when
R1_SWITCH_ERROR bit is set or when the CMD13 fails, this shouldn't be an

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

 drivers/mmc/core/mmc_ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff mbox series


diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index c17b13aacc6e..c14e24570b4e 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -468,7 +468,7 @@  static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
 	if (err)
 		return err;
-	*busy = R1_CURRENT_STATE(status) == R1_STATE_PRG;
+	*busy = !mmc_ready_for_data(status);
 	return 0;