From patchwork Mon Oct 17 09:11:39 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Shih X-Patchwork-Id: 615976 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 53ED0C43219 for ; Mon, 17 Oct 2022 09:14:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231171AbiJQJOC (ORCPT ); Mon, 17 Oct 2022 05:14:02 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34302 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231217AbiJQJNY (ORCPT ); Mon, 17 Oct 2022 05:13:24 -0400 Received: from mail-pl1-x633.google.com (mail-pl1-x633.google.com [IPv6:2607:f8b0:4864:20::633]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E1DD6220D7; Mon, 17 Oct 2022 02:12:58 -0700 (PDT) Received: by mail-pl1-x633.google.com with SMTP id i6so10174079pli.12; Mon, 17 Oct 2022 02:12:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=BHBNIUW9z/2UVO1t1aTu9DuLmSyAkbTh3vVXoH3jAOk=; b=X31FtlvHC4uad1WJglvo98c/eSXS3V8ftbi0zSAW857PhWnKigvNRvTD7TCDPsvS9n 0giKWF6ckBbrqczsrI3uCkj6WrOp+KDYYw7VoP1z8cBvM//y6N+d/QnK+WRmThhkRLf5 Ih73NlZf2sQiFxtBcEC2oZMjhd8sAbtkuuaTEI6PmTuxIZ8BymNDin4+kNHbeAOCdLRA JLQ85NQm06CwHubhg8N/X++KqMD23NEMI/7n8UgoPTLrXM8HhCdEosHYDtEAau9180HZ v4+0Ic+IhdEpIldJu+tii67IPwZppb831aL6kzX7qcVPj9u58IHK+JQv9KTtSCU92xeT U2EQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=BHBNIUW9z/2UVO1t1aTu9DuLmSyAkbTh3vVXoH3jAOk=; b=QZ/813o9fsNWJmYA694GTmnGshTxQhZfoTpq51Adgohkpr+/mka7z3cqrP16Ms6y9k RkgFaaxkzlbmL3Ko2ypTLmfOjj/Mr7UBl8TpDMfryXUlYHkK+dtY/Z8y5P9SerbTpuPn Td434zwI7IJDNaFVl5SwKnh78jV+xLL50b4WN0RQrxrdh8tUAZl3XmTeKCmrjcacVqs1 s/h7IUxSJzu3k8eke0FbKECmvffHS/c3eBr3HtvezjJk8RH3eIt5mvK/XnIcHTadJtyo XrSbM15WgND8Rm96DAVN3eSC1flmItvQdy2FmTSTHUL8kxnZlcL0Pr/yVMf0EHP8oUAI Lj0Q== X-Gm-Message-State: ACrzQf218cJnnAD3Z/8dGEhF+no10gKWRpRQ++u/RU4pSCdhWgmCYAzL pgZUfohqVDscHRgnXQF5Ub4= X-Google-Smtp-Source: AMsMyM7gqQmEHTu94ec3LnsGiHnyEAP1dE4qwlYAY0N4lIowH/gGO/O0yVhwTEtnrzgwT5tzSgN/JQ== X-Received: by 2002:a17:902:7009:b0:178:b9c9:979f with SMTP id y9-20020a170902700900b00178b9c9979fmr10661453plk.39.1665997967011; Mon, 17 Oct 2022 02:12:47 -0700 (PDT) Received: from localhost.localdomain (2001-b400-e258-8c34-4ca3-4989-34c1-7890.emome-ip6.hinet.net. [2001:b400:e258:8c34:4ca3:4989:34c1:7890]) by smtp.gmail.com with ESMTPSA id t22-20020a170902b21600b0017f75bc7a61sm6091996plr.166.2022.10.17.02.12.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 17 Oct 2022 02:12:46 -0700 (PDT) From: Victor Shih X-Google-Original-From: Victor Shih To: ulf.hansson@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org, dlunev@chromium.org, Victor Shih , Ben Chuang Subject: [PATCH V5 12/26] mmc: sdhci-uhs2: add set_power() to support vdd2 Date: Mon, 17 Oct 2022 17:11:39 +0800 Message-Id: <20221017091153.454873-13-victor.shih@genesyslogic.com.tw> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221017091153.454873-1-victor.shih@genesyslogic.com.tw> References: <20221017091153.454873-1-victor.shih@genesyslogic.com.tw> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org This is a UHS-II version of sdhci's set_power operation. VDD2, as well as VDD, is handled here. Signed-off-by: Ben Chuang Signed-off-by: AKASHI Takahiro Signed-off-by: Victor Shih --- drivers/mmc/host/sdhci-uhs2.c | 79 +++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 2 + drivers/mmc/host/sdhci.c | 66 ++++++++++++++++------------- drivers/mmc/host/sdhci.h | 2 + 4 files changed, 120 insertions(+), 29 deletions(-) diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c index 0e82f98d1967..896a1c8e55cf 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -117,6 +117,85 @@ void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask) } EXPORT_SYMBOL_GPL(sdhci_uhs2_reset); +void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + u8 pwr; + + /* FIXME: check if flags & MMC_UHS2_SUPPORT? */ + if (!(sdhci_uhs2_mode(host))) { + sdhci_set_power(host, mode, vdd); + return; + } + + if (mode != MMC_POWER_OFF) { + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) + WARN(1, "%s: Invalid vdd %#x\n", + mmc_hostname(host->mmc), vdd); + pwr |= SDHCI_VDD2_POWER_180; + } + + if (host->pwr == pwr) + return; + host->pwr = pwr; + + if (pwr == 0) { + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + if (!IS_ERR(host->mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + if (!IS_ERR_OR_NULL(host->mmc->supply.vmmc2)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0); + + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + } else { + if (!IS_ERR(host->mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + if (!IS_ERR_OR_NULL(host->mmc->supply.vmmc2)) + /* support 1.8v only for now */ + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, + fls(MMC_VDD2_165_195) - 1); + + /* + * Spec says that we should clear the power reg before setting + * a new value. Some controllers don't seem to like this though. + */ + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + /* + * At least the Marvell CaFe chip gets confused if we set the + * voltage and set turn on power at the same time, so set the + * voltage first. + */ + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + /* vdd first */ + pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL); + mdelay(5); + + pwr |= SDHCI_VDD2_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + mdelay(5); + + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_on(host); + + /* + * Some controllers need an extra 10ms delay of 10ms before + * they can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); + } +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_set_power); + /*****************************************************************************\ * * * Driver init/exit * diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h index 31776dcca5cf..3179915f7f79 100644 --- a/drivers/mmc/host/sdhci-uhs2.h +++ b/drivers/mmc/host/sdhci-uhs2.h @@ -213,5 +213,7 @@ struct sdhci_host; void sdhci_uhs2_dump_regs(struct sdhci_host *host); bool sdhci_uhs2_mode(struct sdhci_host *host); void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask); +void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd); #endif /* __SDHCI_UHS2_H */ diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ab7ea55d9864..509e34f46659 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -23,7 +23,7 @@ #include #include #include - +#include #include #include @@ -186,13 +186,14 @@ static void sdhci_disable_card_detection(struct sdhci_host *host) sdhci_set_card_detection(host, false); } -static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) +void sdhci_runtime_pm_bus_on(struct sdhci_host *host) { if (host->bus_on) return; host->bus_on = true; pm_runtime_get_noresume(mmc_dev(host->mmc)); } +EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_on); void sdhci_runtime_pm_bus_off(struct sdhci_host *host) { @@ -2036,41 +2037,48 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode, sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); } +unsigned short sdhci_get_vdd_value(unsigned short vdd) +{ + u8 pwr; + + switch (1 << vdd) { + case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: + pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = SDHCI_POWER_330; + break; + default: + pwr = 0; + break; + } + + return pwr; +} +EXPORT_SYMBOL_GPL(sdhci_get_vdd_value); + void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, unsigned short vdd) { u8 pwr = 0; if (mode != MMC_POWER_OFF) { - switch (1 << vdd) { - case MMC_VDD_165_195: - /* - * Without a regulator, SDHCI does not support 2.0v - * so we only get here if the driver deliberately - * added the 2.0v range to ocr_avail. Map it to 1.8v - * for the purpose of turning on the power. - */ - case MMC_VDD_20_21: - pwr = SDHCI_POWER_180; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - pwr = SDHCI_POWER_300; - break; - case MMC_VDD_32_33: - case MMC_VDD_33_34: - /* - * 3.4 ~ 3.6V are valid only for those platforms where it's - * known that the voltage range is supported by hardware. - */ - case MMC_VDD_34_35: - case MMC_VDD_35_36: - pwr = SDHCI_POWER_330; - break; - default: + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) { WARN(1, "%s: Invalid vdd %#x\n", mmc_hostname(host->mmc), vdd); - break; } } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 3787ffe61c78..0d34ff4dca4e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -852,6 +852,7 @@ static inline void sdhci_read_caps(struct sdhci_host *host) __sdhci_read_caps(host, NULL, NULL, NULL); } +void sdhci_runtime_pm_bus_on(struct sdhci_host *host); void sdhci_runtime_pm_bus_off(struct sdhci_host *host); u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, unsigned int *actual_clock); @@ -862,6 +863,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode, void sdhci_set_power_and_bus_voltage(struct sdhci_host *host, unsigned char mode, unsigned short vdd); +unsigned short sdhci_get_vdd_value(unsigned short vdd); void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, unsigned short vdd); int sdhci_get_cd_nogpio(struct mmc_host *mmc);