deleted file mode 100644
@@ -1,63 +0,0 @@
-Amlogic Meson Power Controller
-==============================
-
-The Amlogic Meson SoCs embeds an internal Power domain controller.
-
-VPU Power Domain
-----------------
-
-The Video Processing Unit power domain is controlled by this power controller,
-but the domain requires some external resources to meet the correct power
-sequences.
-The bindings must respect the power domain bindings as described in the file
-power-domain.yaml
-
-Device Tree Bindings:
----------------------
-
-Required properties:
-- compatible: should be one of the following :
- - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
- - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
-- #power-domain-cells: should be 0
-- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
-- resets: phandles to the reset lines needed for this power demain sequence
- as described in ../reset/reset.txt
-- clocks: from common clock binding: handle to VPU and VAPB clocks
-- clock-names: from common clock binding: must contain "vpu", "vapb"
- corresponding to entry in the clocks property.
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
-- reg: base address and size of the AO system control register space.
-
-Example:
--------
-
-ao_sysctrl: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
- reg = <0x0 0x0 0x0 0x100>;
-
- pwrc_vpu: power-controller-vpu {
- compatible = "amlogic,meson-gx-pwrc-vpu";
- #power-domain-cells = <0>;
- amlogic,hhi-sysctrl = <&sysctrl>;
- resets = <&reset RESET_VIU>,
- <&reset RESET_VENC>,
- <&reset RESET_VCBUS>,
- <&reset RESET_BT656>,
- <&reset RESET_DVIN_RESET>,
- <&reset RESET_RDMA>,
- <&reset RESET_VENCI>,
- <&reset RESET_VENCP>,
- <&reset RESET_VDAC>,
- <&reset RESET_VDI6>,
- <&reset RESET_VENCL>,
- <&reset RESET_VID_LOCK>;
- clocks = <&clkc CLKID_VPU>,
- <&clkc CLKID_VAPB>;
- clock-names = "vpu", "vapb";
- };
-};
-
-
Remove the deprecated amlogic,meson-gx-pwrc.txt bindings, which was replaced by the amlogic,meson-ee-pwrc.yaml bindings. The amlogic,meson-gx-pwrc-vpu compatible isn't used anymore since [1] was merged in v5.8-rc1 and amlogic,meson-g12a-pwrc-vpu either since [2] was merged in v5.3-rc1. [1] commit 5273d6cacc06 ("arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings") [2] commit f4f1c8d9ace7 ("arm64: dts: meson-g12: add Everything-Else power domain controller") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../bindings/power/amlogic,meson-gx-pwrc.txt | 63 ---------------------- 1 file changed, 63 deletions(-)