| Message ID | 20231117113149.9069-15-victorshihgli@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support UHS-II for GL9755 | expand |
On 17/11/23 13:31, Victor Shih wrote: > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > This is a sdhci version of mmc's set_ios operation. > THis is used to handle basic IO bus setting. > It covers both UHS-I and UHS-II. > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > --- > > Updates in V13: > - Add judgment condition for power mode in the __sdhci_uhs2_set_ios(). > - Modify comment message. > > Updates in V9: > - Simplity the turning_on_clk in sdhci_set_ios(). > > Updates in V8: > - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B > and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios(). > - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B > and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value(). > - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr() > in sdhci_uhs2_set_ios(). > > Updates in V7: > - Remove unnecessary functions. > > Updates in V6: > - Modify return value in some functions. > - Remove unnecessary functions. > > --- > > drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci-uhs2.h | 1 + > drivers/mmc/host/sdhci.c | 55 ++++++++++++-------- > drivers/mmc/host/sdhci.h | 2 + > 4 files changed, 132 insertions(+), 21 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > index 5a79dd29aa38..a55b910f3615 100644 > --- a/drivers/mmc/host/sdhci-uhs2.c > +++ b/drivers/mmc/host/sdhci-uhs2.c > @@ -214,6 +214,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) > } > EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout); > > +/** > + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register > + * @host: SDHCI host > + * @clear: bit-wise clear mask > + * @set: bit-wise set mask > + * > + * Set/unset bits in UHS-II Error Interrupt Status Enable register > + */ > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) > +{ > + u32 ier; > + > + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE); > + ier &= ~clear; > + ier |= set; > + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE); > + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE); > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs); > + > +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + u8 cmd_res, dead_lock; > + u16 ctrl_2; > + > + /* UHS2 Timeout Control */ > + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock); > + > + /* change to use calculate value */ > + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock); > + > + sdhci_uhs2_clear_set_irqs(host, > + SDHCI_UHS2_INT_CMD_TIMEOUT | > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT, > + 0); > + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL); > + sdhci_uhs2_clear_set_irqs(host, 0, > + SDHCI_UHS2_INT_CMD_TIMEOUT | > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT); > + > + /* UHS2 timing. Note, UHS2 timing is disabled when powering off */ > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + if (ios->power_mode != MMC_POWER_OFF && > + (ios->timing == MMC_TIMING_UHS2_SPEED_A || > + ios->timing == MMC_TIMING_UHS2_SPEED_A_HD || > + ios->timing == MMC_TIMING_UHS2_SPEED_B || > + ios->timing == MMC_TIMING_UHS2_SPEED_B_HD)) > + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE; > + else > + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE); > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > + host->timing = ios->timing; > + > + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) > + sdhci_enable_preset_value(host, true); > + > + if (host->ops->set_power) > + host->ops->set_power(host, ios->power_mode, ios->vdd); > + else > + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd); > + > + sdhci_set_clock(host, host->clock); > +} > + > +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + > + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n", > + mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing); > + > + if (!sdhci_uhs2_mode(host)) { > + sdhci_set_ios(mmc, ios); > + return 0; > + } > + > + if (ios->power_mode == MMC_POWER_UNDEFINED) > + return 0; > + > + if (host->flags & SDHCI_DEVICE_DEAD) { > + if (ios->power_mode == MMC_POWER_OFF) { > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > + mmc_regulator_set_vqmmc2(mmc, ios); mmc_regulator_set_vqmmc2() only sets the voltage, it doesn't disable the regulator. > + } > + return -1; > + } > + > + sdhci_set_ios_common(mmc, ios); > + > + __sdhci_uhs2_set_ios(mmc, ios); > + > + return 0; > +} > + > /*****************************************************************************\ > * * > * Driver init/exit * > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h > index ccf4e1834c2d..a3641c5f8c77 100644 > --- a/drivers/mmc/host/sdhci-uhs2.h > +++ b/drivers/mmc/host/sdhci-uhs2.h > @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host); > bool sdhci_uhs2_mode(struct sdhci_host *host); > void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask); > void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set); > > #endif /* __SDHCI_UHS2_H */ > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 4d50cac7717d..64704f6537e0 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -47,8 +47,6 @@ > static unsigned int debug_quirks = 0; > static unsigned int debug_quirks2; > > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); > - > static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > > void sdhci_dumpregs(struct sdhci_host *host) > @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host) > case MMC_TIMING_MMC_HS400: > preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400); > break; > + case MMC_TIMING_UHS2_SPEED_A: > + case MMC_TIMING_UHS2_SPEED_A_HD: > + case MMC_TIMING_UHS2_SPEED_B: > + case MMC_TIMING_UHS2_SPEED_B_HD: > + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2); > + break; > default: > pr_warn("%s: Invalid UHS-I mode selected\n", > mmc_hostname(host->mmc)); > @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i > (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type); > } > > -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios) > { > struct sdhci_host *host = mmc_priv(mmc); > - bool reinit_uhs = host->reinit_uhs; > - bool turning_on_clk = false; > - u8 ctrl; > - > - host->reinit_uhs = false; > - > - if (ios->power_mode == MMC_POWER_UNDEFINED) > - return; > - > - if (host->flags & SDHCI_DEVICE_DEAD) { > - if (!IS_ERR(mmc->supply.vmmc) && > - ios->power_mode == MMC_POWER_OFF) > - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > - return; > - } > > /* > * Reset the chip on each power off. > @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > sdhci_enable_preset_value(host, false); > > if (!ios->clock || ios->clock != host->clock) { > - turning_on_clk = ios->clock && !host->clock; > - > host->ops->set_clock(host, ios->clock); > host->clock = ios->clock; > > @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > mmc->max_busy_timeout /= host->timeout_clk; > } > } > +} > +EXPORT_SYMBOL_GPL(sdhci_set_ios_common); > + > +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + bool reinit_uhs = host->reinit_uhs; > + bool turning_on_clk; > + u8 ctrl; > + > + host->reinit_uhs = false; > + > + if (ios->power_mode == MMC_POWER_UNDEFINED) > + return; > + > + if (host->flags & SDHCI_DEVICE_DEAD) { > + if (!IS_ERR(mmc->supply.vmmc) && > + ios->power_mode == MMC_POWER_OFF) > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > + return; > + } > + > + turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock; > + > + sdhci_set_ios_common(mmc, ios); > > if (host->ops->set_power) > host->ops->set_power(host, ios->power_mode, ios->vdd); > @@ -2958,7 +2970,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) > } > EXPORT_SYMBOL_GPL(sdhci_execute_tuning); > > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > { > /* Host Controller v3.00 defines preset value registers */ > if (host->version < SDHCI_SPEC_300) > @@ -2986,6 +2998,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > host->preset_enabled = enable; > } > } > +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value); > > static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq, > int err) > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index cdb418d97c4d..b2e425dfac95 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask); > void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); > int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); > int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode); > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios); > void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); > int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, > struct mmc_ios *ios);
On Tue, Nov 28, 2023 at 5:12 PM Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 17/11/23 13:31, Victor Shih wrote: > > From: Victor Shih <victor.shih@genesyslogic.com.tw> > > > > This is a sdhci version of mmc's set_ios operation. > > THis is used to handle basic IO bus setting. > > It covers both UHS-I and UHS-II. > > > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > > --- > > > > Updates in V13: > > - Add judgment condition for power mode in the __sdhci_uhs2_set_ios(). > > - Modify comment message. > > > > Updates in V9: > > - Simplity the turning_on_clk in sdhci_set_ios(). > > > > Updates in V8: > > - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B > > and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios(). > > - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B > > and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value(). > > - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr() > > in sdhci_uhs2_set_ios(). > > > > Updates in V7: > > - Remove unnecessary functions. > > > > Updates in V6: > > - Modify return value in some functions. > > - Remove unnecessary functions. > > > > --- > > > > drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++ > > drivers/mmc/host/sdhci-uhs2.h | 1 + > > drivers/mmc/host/sdhci.c | 55 ++++++++++++-------- > > drivers/mmc/host/sdhci.h | 2 + > > 4 files changed, 132 insertions(+), 21 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > > index 5a79dd29aa38..a55b910f3615 100644 > > --- a/drivers/mmc/host/sdhci-uhs2.c > > +++ b/drivers/mmc/host/sdhci-uhs2.c > > @@ -214,6 +214,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) > > } > > EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout); > > > > +/** > > + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register > > + * @host: SDHCI host > > + * @clear: bit-wise clear mask > > + * @set: bit-wise set mask > > + * > > + * Set/unset bits in UHS-II Error Interrupt Status Enable register > > + */ > > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) > > +{ > > + u32 ier; > > + > > + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE); > > + ier &= ~clear; > > + ier |= set; > > + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE); > > + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE); > > +} > > +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs); > > + > > +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + u8 cmd_res, dead_lock; > > + u16 ctrl_2; > > + > > + /* UHS2 Timeout Control */ > > + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock); > > + > > + /* change to use calculate value */ > > + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock); > > + > > + sdhci_uhs2_clear_set_irqs(host, > > + SDHCI_UHS2_INT_CMD_TIMEOUT | > > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT, > > + 0); > > + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL); > > + sdhci_uhs2_clear_set_irqs(host, 0, > > + SDHCI_UHS2_INT_CMD_TIMEOUT | > > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT); > > + > > + /* UHS2 timing. Note, UHS2 timing is disabled when powering off */ > > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > > + if (ios->power_mode != MMC_POWER_OFF && > > + (ios->timing == MMC_TIMING_UHS2_SPEED_A || > > + ios->timing == MMC_TIMING_UHS2_SPEED_A_HD || > > + ios->timing == MMC_TIMING_UHS2_SPEED_B || > > + ios->timing == MMC_TIMING_UHS2_SPEED_B_HD)) > > + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE; > > + else > > + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE); > > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > > + host->timing = ios->timing; > > + > > + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) > > + sdhci_enable_preset_value(host, true); > > + > > + if (host->ops->set_power) > > + host->ops->set_power(host, ios->power_mode, ios->vdd); > > + else > > + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd); > > + > > + sdhci_set_clock(host, host->clock); > > +} > > + > > +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + > > + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n", > > + mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing); > > + > > + if (!sdhci_uhs2_mode(host)) { > > + sdhci_set_ios(mmc, ios); > > + return 0; > > + } > > + > > + if (ios->power_mode == MMC_POWER_UNDEFINED) > > + return 0; > > + > > + if (host->flags & SDHCI_DEVICE_DEAD) { > > + if (ios->power_mode == MMC_POWER_OFF) { > > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > > + mmc_regulator_set_vqmmc2(mmc, ios); > > mmc_regulator_set_vqmmc2() only sets the voltage, it doesn't > disable the regulator. > Hi, Ulf Would you have any idea about using the mmc_regulator_set_vqmmc2() to disable the regulator? Thanks, Victor Shih > > + } > > + return -1; > > + } > > + > > + sdhci_set_ios_common(mmc, ios); > > + > > + __sdhci_uhs2_set_ios(mmc, ios); > > + > > + return 0; > > +} > > + > > /*****************************************************************************\ > > * * > > * Driver init/exit * > > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h > > index ccf4e1834c2d..a3641c5f8c77 100644 > > --- a/drivers/mmc/host/sdhci-uhs2.h > > +++ b/drivers/mmc/host/sdhci-uhs2.h > > @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host); > > bool sdhci_uhs2_mode(struct sdhci_host *host); > > void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask); > > void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); > > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set); > > > > #endif /* __SDHCI_UHS2_H */ > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > > index 4d50cac7717d..64704f6537e0 100644 > > --- a/drivers/mmc/host/sdhci.c > > +++ b/drivers/mmc/host/sdhci.c > > @@ -47,8 +47,6 @@ > > static unsigned int debug_quirks = 0; > > static unsigned int debug_quirks2; > > > > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); > > - > > static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > > > > void sdhci_dumpregs(struct sdhci_host *host) > > @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host) > > case MMC_TIMING_MMC_HS400: > > preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400); > > break; > > + case MMC_TIMING_UHS2_SPEED_A: > > + case MMC_TIMING_UHS2_SPEED_A_HD: > > + case MMC_TIMING_UHS2_SPEED_B: > > + case MMC_TIMING_UHS2_SPEED_B_HD: > > + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2); > > + break; > > default: > > pr_warn("%s: Invalid UHS-I mode selected\n", > > mmc_hostname(host->mmc)); > > @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i > > (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type); > > } > > > > -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios) > > { > > struct sdhci_host *host = mmc_priv(mmc); > > - bool reinit_uhs = host->reinit_uhs; > > - bool turning_on_clk = false; > > - u8 ctrl; > > - > > - host->reinit_uhs = false; > > - > > - if (ios->power_mode == MMC_POWER_UNDEFINED) > > - return; > > - > > - if (host->flags & SDHCI_DEVICE_DEAD) { > > - if (!IS_ERR(mmc->supply.vmmc) && > > - ios->power_mode == MMC_POWER_OFF) > > - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > > - return; > > - } > > > > /* > > * Reset the chip on each power off. > > @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > sdhci_enable_preset_value(host, false); > > > > if (!ios->clock || ios->clock != host->clock) { > > - turning_on_clk = ios->clock && !host->clock; > > - > > host->ops->set_clock(host, ios->clock); > > host->clock = ios->clock; > > > > @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > mmc->max_busy_timeout /= host->timeout_clk; > > } > > } > > +} > > +EXPORT_SYMBOL_GPL(sdhci_set_ios_common); > > + > > +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + bool reinit_uhs = host->reinit_uhs; > > + bool turning_on_clk; > > + u8 ctrl; > > + > > + host->reinit_uhs = false; > > + > > + if (ios->power_mode == MMC_POWER_UNDEFINED) > > + return; > > + > > + if (host->flags & SDHCI_DEVICE_DEAD) { > > + if (!IS_ERR(mmc->supply.vmmc) && > > + ios->power_mode == MMC_POWER_OFF) > > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); > > + return; > > + } > > + > > + turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock; > > + > > + sdhci_set_ios_common(mmc, ios); > > > > if (host->ops->set_power) > > host->ops->set_power(host, ios->power_mode, ios->vdd); > > @@ -2958,7 +2970,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) > > } > > EXPORT_SYMBOL_GPL(sdhci_execute_tuning); > > > > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > > { > > /* Host Controller v3.00 defines preset value registers */ > > if (host->version < SDHCI_SPEC_300) > > @@ -2986,6 +2998,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) > > host->preset_enabled = enable; > > } > > } > > +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value); > > > > static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq, > > int err) > > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > > index cdb418d97c4d..b2e425dfac95 100644 > > --- a/drivers/mmc/host/sdhci.h > > +++ b/drivers/mmc/host/sdhci.h > > @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask); > > void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); > > int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); > > int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode); > > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); > > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios); > > void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); > > int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, > > struct mmc_ios *ios); >
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c index 5a79dd29aa38..a55b910f3615 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -214,6 +214,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) } EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout); +/** + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register + * @host: SDHCI host + * @clear: bit-wise clear mask + * @set: bit-wise set mask + * + * Set/unset bits in UHS-II Error Interrupt Status Enable register + */ +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) +{ + u32 ier; + + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE); + ier &= ~clear; + ier |= set; + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE); + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs); + +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + u8 cmd_res, dead_lock; + u16 ctrl_2; + + /* UHS2 Timeout Control */ + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock); + + /* change to use calculate value */ + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock); + + sdhci_uhs2_clear_set_irqs(host, + SDHCI_UHS2_INT_CMD_TIMEOUT | + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT, + 0); + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL); + sdhci_uhs2_clear_set_irqs(host, 0, + SDHCI_UHS2_INT_CMD_TIMEOUT | + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT); + + /* UHS2 timing. Note, UHS2 timing is disabled when powering off */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ios->power_mode != MMC_POWER_OFF && + (ios->timing == MMC_TIMING_UHS2_SPEED_A || + ios->timing == MMC_TIMING_UHS2_SPEED_A_HD || + ios->timing == MMC_TIMING_UHS2_SPEED_B || + ios->timing == MMC_TIMING_UHS2_SPEED_B_HD)) + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE; + else + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE); + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + host->timing = ios->timing; + + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) + sdhci_enable_preset_value(host, true); + + if (host->ops->set_power) + host->ops->set_power(host, ios->power_mode, ios->vdd); + else + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd); + + sdhci_set_clock(host, host->clock); +} + +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n", + mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing); + + if (!sdhci_uhs2_mode(host)) { + sdhci_set_ios(mmc, ios); + return 0; + } + + if (ios->power_mode == MMC_POWER_UNDEFINED) + return 0; + + if (host->flags & SDHCI_DEVICE_DEAD) { + if (ios->power_mode == MMC_POWER_OFF) { + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + mmc_regulator_set_vqmmc2(mmc, ios); + } + return -1; + } + + sdhci_set_ios_common(mmc, ios); + + __sdhci_uhs2_set_ios(mmc, ios); + + return 0; +} + /*****************************************************************************\ * * * Driver init/exit * diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h index ccf4e1834c2d..a3641c5f8c77 100644 --- a/drivers/mmc/host/sdhci-uhs2.h +++ b/drivers/mmc/host/sdhci-uhs2.h @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host); bool sdhci_uhs2_mode(struct sdhci_host *host); void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask); void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set); #endif /* __SDHCI_UHS2_H */ diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 4d50cac7717d..64704f6537e0 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -47,8 +47,6 @@ static unsigned int debug_quirks = 0; static unsigned int debug_quirks2; -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); - static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); void sdhci_dumpregs(struct sdhci_host *host) @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host) case MMC_TIMING_MMC_HS400: preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400); break; + case MMC_TIMING_UHS2_SPEED_A: + case MMC_TIMING_UHS2_SPEED_A_HD: + case MMC_TIMING_UHS2_SPEED_B: + case MMC_TIMING_UHS2_SPEED_B_HD: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2); + break; default: pr_warn("%s: Invalid UHS-I mode selected\n", mmc_hostname(host->mmc)); @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type); } -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios) { struct sdhci_host *host = mmc_priv(mmc); - bool reinit_uhs = host->reinit_uhs; - bool turning_on_clk = false; - u8 ctrl; - - host->reinit_uhs = false; - - if (ios->power_mode == MMC_POWER_UNDEFINED) - return; - - if (host->flags & SDHCI_DEVICE_DEAD) { - if (!IS_ERR(mmc->supply.vmmc) && - ios->power_mode == MMC_POWER_OFF) - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); - return; - } /* * Reset the chip on each power off. @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_enable_preset_value(host, false); if (!ios->clock || ios->clock != host->clock) { - turning_on_clk = ios->clock && !host->clock; - host->ops->set_clock(host, ios->clock); host->clock = ios->clock; @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) mmc->max_busy_timeout /= host->timeout_clk; } } +} +EXPORT_SYMBOL_GPL(sdhci_set_ios_common); + +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + bool reinit_uhs = host->reinit_uhs; + bool turning_on_clk; + u8 ctrl; + + host->reinit_uhs = false; + + if (ios->power_mode == MMC_POWER_UNDEFINED) + return; + + if (host->flags & SDHCI_DEVICE_DEAD) { + if (!IS_ERR(mmc->supply.vmmc) && + ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + return; + } + + turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock; + + sdhci_set_ios_common(mmc, ios); if (host->ops->set_power) host->ops->set_power(host, ios->power_mode, ios->vdd); @@ -2958,7 +2970,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) } EXPORT_SYMBOL_GPL(sdhci_execute_tuning); -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) { /* Host Controller v3.00 defines preset value registers */ if (host->version < SDHCI_SPEC_300) @@ -2986,6 +2998,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) host->preset_enabled = enable; } } +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value); static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq, int err) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index cdb418d97c4d..b2e425dfac95 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask); void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode); +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios); void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios);