From patchwork Thu Aug 29 10:15:38 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Shih X-Patchwork-Id: 823779 Received: from mail-pf1-f171.google.com (mail-pf1-f171.google.com [209.85.210.171]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 573221A01CC; Thu, 29 Aug 2024 10:17:18 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.171 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724926640; cv=none; b=X4QAPrvf4ehdCShkRRnAiwBC50fNbR0lbHRka9SWDdqnZv+SUXXjqFqzPWETx7KSpZNMvDkkcXM73lxjSYaj8i/1/yf35XM5kRc6DzGkaBKcfKDq5XUbXY4sEHi/zC5UQWUz8dhmcjPQjQz82QUaP054l1kQfNl6xb4gfoiBoe8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724926640; c=relaxed/simple; bh=eoLnc3tyVWbY7WxMb2ppU5sHfX7LeTPHto4k8DBLYCM=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=BCCs85WROXJodplt9Ltvp8/12auL5ee/iynC3fjUqftvvPEa3BVRPzOE5k2BDUOuBCK8LzrAwJIAgSuehFxwhqWBVM62mDo8TMN+CNqCMfYczUUBjZmZE8cYjWpJJXCNgpZMbS5T2LzXp9IAyjV1Bu4v+O7nM3a3/YvVuYBP110= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=kpvDNlBn; arc=none smtp.client-ip=209.85.210.171 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="kpvDNlBn" Received: by mail-pf1-f171.google.com with SMTP id d2e1a72fcca58-715cdc7a153so370066b3a.0; Thu, 29 Aug 2024 03:17:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1724926638; x=1725531438; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qF7Qc/cMB+UZmwCkebn+en4pgAHxk/1HKPSoLdLEP2E=; b=kpvDNlBn0B0fIsY/Bi1le19mMxSWJrH1Wilx5ZyTgFioMdRzxaPTgCaNnp69NkQaT4 CQrOYKneUxYoUjFwQcMHmXZxx5Zy9sjDXp1wz1e1rsTZH9HWWPoOgOG/hbP+Vvdi5C+P yfCuFYIggTs5TTpI7NjzU9WtPhAhJY2qr0d88boNWx7DjfnEfq83MUvZ2eM8ycafKCt4 XSet/a1y+Em9EtTxR+eJFuXvH+R8KK90JsJfHSHX9WcmttwYfaTFiRae5OSEZViAe7H0 L4vioOGTxs7bIAYysUzg8/EBl2YoGKBLxEekFQVn6CKLpwrp7naaosHXYmm5apTJrKsN i21w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1724926638; x=1725531438; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qF7Qc/cMB+UZmwCkebn+en4pgAHxk/1HKPSoLdLEP2E=; b=M8XmclqE2Ak+kujeNwtK5kIW28m+UEX27XdhtRsZJW8VfK/Zqe+u5IbUddO3X25RTz /+oxnKVTcV/xIYs99rV0ZWlcj9TB/1bDj95+0bkCRsj02bokfKyhdDWelqitF6K/EnSq jUM+shOoj69NrqgNbKeGLJK8dqZyQvHDNkI7RozCIbXjRxsdEx9l0IEb5yzKzXEL8gL6 SWqye6GuPetDwYJvR376Ipr6Vcq4xx8+jNS8MZM/Xu7B+GDtiKZuRlDe6RBX/EPsgQsH mNkk2xTfsFJq7j34Wc94gwqBFPTCGHCnWP4A2EyV9xIYirV6gOzVTCi5lLxdPCdtHrFA p/Rw== X-Forwarded-Encrypted: i=1; AJvYcCUTRxPb7NznBkhpfARaeEiKLHXEXSWGy9b1m349zb0fyYQ9CTBmITsVnxP8RwsD1TTs41Lm4TtV/YkOqwI=@vger.kernel.org X-Gm-Message-State: AOJu0Yyl82PZuR/wvMSLxwX6mYzpEa7fKKkJtdo7qOpFpoEri75VTwHg 4ukrBcD7dDcgyzv8gShw2qvtx5q9NjNKPBrz/UlufqxqbAo4dJIH X-Google-Smtp-Source: AGHT+IGyt10FnHnn44PlzR9AesLsJekWz9gXDyN8DrX0L9QKztNfU1p42dzUWuB4s/eZDI0YhnTOBQ== X-Received: by 2002:a05:6a00:2150:b0:714:218c:93c0 with SMTP id d2e1a72fcca58-715e1020964mr2933755b3a.11.1724926637549; Thu, 29 Aug 2024 03:17:17 -0700 (PDT) Received: from localhost.localdomain ([2402:7500:479:a52:632f:b914:4ddf:273]) by smtp.gmail.com with ESMTPSA id d2e1a72fcca58-715e56d77eesm816577b3a.153.2024.08.29.03.17.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 29 Aug 2024 03:17:17 -0700 (PDT) From: Victor Shih To: ulf.hansson@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, Lucas.Lai@genesyslogic.com.tw, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, dlunev@chromium.org, Victor Shih , Ben Chuang , AKASHI Takahiro , Victor Shih , Lucas Lai Subject: [PATCH V19 21/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Date: Thu, 29 Aug 2024 18:15:38 +0800 Message-Id: <20240829101539.5058-22-victorshihgli@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240829101539.5058-1-victorshihgli@gmail.com> References: <20240829101539.5058-1-victorshihgli@gmail.com> Precedence: bulk X-Mailing-List: linux-mmc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 From: Victor Shih Changes are: * Disable GL9755 overcurrent interrupt when power on/off on UHS-II. * Enable the internal clock when do reset on UHS-II mode. * Increase timeout value before detecting UHS-II interface. * Add vendor settings fro UHS-II mode. Signed-off-by: Ben Chuang Signed-off-by: AKASHI Takahiro Signed-off-by: Victor Shih Signed-off-by: Lucas Lai --- Updates in V19: - Add sdhci_gli_enable_internal_clock() to simplify the code in the sdhci_gl9755_reset(). Updates in V17: - Rname gl9755_overcurrent_event_enable() to sdhci_gli_overcurrent_event_enable(). Updates in V15: - Adjust gl9755_vendor_init() to the correct function. Updates in V13: - Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN. Updates in V9: - Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). - Rename gl9755_uhs2_reset_sd_tran() to sdhci_gli_uhs2_reset_sd_tran(). Updates in V8: - Use sdhci_get_vdd_value() to simplify code in gl9755_set_power(). - Use read_poll_timeout_atomic() to simplify code in sdhci_wait_clock_stable(). - Use read_poll_timeout_atomic() to simplify code in sdhci_gl9755_reset(). Updates in V7: - Drop using gl9755_post_attach_sd(). --- drivers/mmc/host/sdhci-pci-gli.c | 230 ++++++++++++++++++++++++++++++- 1 file changed, 229 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 0f81586a19df..e826e02a0d52 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -18,6 +18,7 @@ #include "sdhci-cqhci.h" #include "sdhci-pci.h" #include "cqhci.h" +#include "sdhci-uhs2.h" /* Genesys Logic extra registers */ #define SDHCI_GLI_9750_WT 0x800 @@ -139,9 +140,36 @@ #define PCI_GLI_9755_PLLSSC 0x68 #define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0) +#define PCI_GLI_9755_PLLSSC_RTL BIT(24) +#define GLI_9755_PLLSSC_RTL_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_TRANS_PASS BIT(27) +#define GLI_9755_PLLSSC_TRANS_PASS_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_RECV GENMASK(29, 28) +#define GLI_9755_PLLSSC_RECV_VALUE 0x0 +#define PCI_GLI_9755_PLLSSC_TRAN GENMASK(31, 30) +#define GLI_9755_PLLSSC_TRAN_VALUE 0x3 + +#define PCI_GLI_9755_UHS2_PLL 0x6C +#define PCI_GLI_9755_UHS2_PLL_SSC GENMASK(9, 8) +#define GLI_9755_UHS2_PLL_SSC_VALUE 0x0 +#define PCI_GLI_9755_UHS2_PLL_DELAY BIT(18) +#define GLI_9755_UHS2_PLL_DELAY_VALUE 0x1 +#define PCI_GLI_9755_UHS2_PLL_PDRST BIT(27) +#define GLI_9755_UHS2_PLL_PDRST_VALUE 0x1 #define PCI_GLI_9755_SerDes 0x70 +#define PCI_GLI_9755_UHS2_SERDES_INTR GENMASK(2, 0) +#define GLI_9755_UHS2_SERDES_INTR_VALUE 0x3 +#define PCI_GLI_9755_UHS2_SERDES_ZC1 BIT(3) +#define GLI_9755_UHS2_SERDES_ZC1_VALUE 0x0 +#define PCI_GLI_9755_UHS2_SERDES_ZC2 GENMASK(7, 4) +#define GLI_9755_UHS2_SERDES_ZC2_DEFAULT 0xB +#define GLI_9755_UHS2_SERDES_ZC2_SANDISK 0x0 #define PCI_GLI_9755_SCP_DIS BIT(19) +#define PCI_GLI_9755_UHS2_SERDES_TRAN GENMASK(27, 24) +#define GLI_9755_UHS2_SERDES_TRAN_VALUE 0xC +#define PCI_GLI_9755_UHS2_SERDES_RECV GENMASK(31, 28) +#define GLI_9755_UHS2_SERDES_RECV_VALUE 0xF #define PCI_GLI_9755_MISC 0x78 #define PCI_GLI_9755_MISC_SSC_OFF BIT(26) @@ -779,6 +807,198 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot) gl9755_wt_off(pdev); } +static void gl9755_vendor_init(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 serdes; + u32 pllssc; + u32 uhs2_pll; + + gl9755_wt_on(pdev); + + pci_read_config_dword(pdev, PCI_GLI_9755_SerDes, &serdes); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_TRAN; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_TRAN, + GLI_9755_UHS2_SERDES_TRAN_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_RECV; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_RECV, + GLI_9755_UHS2_SERDES_RECV_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_INTR; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_INTR, + GLI_9755_UHS2_SERDES_INTR_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC1; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC1, + GLI_9755_UHS2_SERDES_ZC1_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC2; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC2, + GLI_9755_UHS2_SERDES_ZC2_DEFAULT); + pci_write_config_dword(pdev, PCI_GLI_9755_SerDes, serdes); + + pci_read_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, &uhs2_pll); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_SSC; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_SSC, + GLI_9755_UHS2_PLL_SSC_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_DELAY; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_DELAY, + GLI_9755_UHS2_PLL_DELAY_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_PDRST; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_PDRST, + GLI_9755_UHS2_PLL_PDRST_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, uhs2_pll); + + pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &pllssc); + pllssc &= ~PCI_GLI_9755_PLLSSC_RTL; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RTL, + GLI_9755_PLLSSC_RTL_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRANS_PASS; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRANS_PASS, + GLI_9755_PLLSSC_TRANS_PASS_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_RECV; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RECV, + GLI_9755_PLLSSC_RECV_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRAN; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRAN, + GLI_9755_PLLSSC_TRAN_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, pllssc); + + gl9755_wt_off(pdev); +} + +static void sdhci_gli_pre_detect_init(struct sdhci_host *host) +{ + /* Need more time on UHS2 detect flow */ + sdhci_writeb(host, 0xA7, SDHCI_UHS2_TIMER_CTRL); +} + +static void sdhci_gli_overcurrent_event_enable(struct sdhci_host *host, bool enable) +{ + u32 mask; + + mask = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_SIGNAL_ENABLE); + + mask = sdhci_readl(host, SDHCI_INT_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_INT_ENABLE); +} + +static void gl9755_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + u8 pwr = 0; + + if (mode != MMC_POWER_OFF) { + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) + WARN(1, "%s: Invalid vdd %#x\n", mmc_hostname(host->mmc), vdd); + pwr |= SDHCI_VDD2_POWER_180; + } + + if (host->pwr == pwr) + return; + + host->pwr = pwr; + + if (pwr == 0) { + sdhci_gli_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + } else { + sdhci_gli_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + pwr |= (SDHCI_POWER_ON | SDHCI_VDD2_POWER_ON); + + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + sdhci_gli_overcurrent_event_enable(host, true); + } +} + +static bool sdhci_wait_clock_stable(struct sdhci_host *host) +{ + u16 clk = 0; + + if (read_poll_timeout_atomic(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE), + 10, 20000, false, host, SDHCI_CLOCK_CONTROL)) { + pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return false; + } + return true; +} + +static void sdhci_gli_enable_internal_clock(struct sdhci_host *host) +{ + u16 clk_ctrl; + u16 ctrl2; + + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL); + + if (!((ctrl2 & SDHCI_CTRL_V4_MODE) && + (ctrl2 & SDHCI_CTRL_UHS2_ENABLE))) { + sdhci_wait_clock_stable(host); + sdhci_writew(host, SDHCI_CTRL_V4_MODE, SDHCI_HOST_CONTROL2); + } +} + +static void sdhci_gli_uhs2_reset_sd_tran(struct sdhci_host *host) +{ + /* do this on UHS2 mode */ + if (host->mmc->uhs2_sd_tran) { + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + sdhci_uhs2_clear_set_irqs(host, + SDHCI_INT_ALL_MASK, + SDHCI_UHS2_INT_ERROR_MASK); + } +} + +static void sdhci_gl9755_reset(struct sdhci_host *host, u8 mask) +{ + u8 rst; + + /* need internal clock */ + if (mask & SDHCI_RESET_ALL) + sdhci_gli_enable_internal_clock(host); + + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + + /* reset sd-tran on UHS2 mode if need to reset cmd/data */ + if ((mask & SDHCI_RESET_CMD) | (mask & SDHCI_RESET_DATA)) + sdhci_gli_uhs2_reset_sd_tran(host); + + if (mask & SDHCI_RESET_ALL) + host->clock = 0; + + /* hw clears the bit when it's done */ + if (read_poll_timeout_atomic(sdhci_readb, rst, !(rst & mask), + 10, 100000, false, host, SDHCI_SOFTWARE_RESET)) { + pr_err("%s: Reset 0x%x never completed.\n", mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + /* manual clear */ + sdhci_writeb(host, 0, SDHCI_SOFTWARE_RESET); + return; + } +} + static inline void gl9767_vhs_read(struct pci_dev *pdev) { u32 vhs_enable; @@ -1086,6 +1306,7 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) gli_pcie_enable_msi(slot); slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; sdhci_enable_v4_mode(host); + gl9755_vendor_init(host); return 0; } @@ -1524,17 +1745,24 @@ static const struct sdhci_ops sdhci_gl9755_ops = { .read_w = sdhci_gli_readw, .read_b = sdhci_gli_readb, .set_clock = sdhci_gl9755_set_clock, + .set_power = gl9755_set_power, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_gl9755_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .voltage_switch = sdhci_gli_voltage_switch, + .dump_uhs2_regs = sdhci_uhs2_dump_regs, + .set_timeout = sdhci_uhs2_set_timeout, + .irq = sdhci_uhs2_irq, + .uhs2_pre_detect_init = sdhci_gli_pre_detect_init, }; const struct sdhci_pci_fixes sdhci_gl9755 = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, .probe_slot = gli_probe_slot_gl9755, + .add_host = sdhci_pci_uhs2_add_host, + .remove_host = sdhci_pci_uhs2_remove_host, .ops = &sdhci_gl9755_ops, #ifdef CONFIG_PM_SLEEP .resume = sdhci_pci_gli_resume,