diff mbox series

[3/4] mmc: rename mmc_host_uhs() to mmc_host_can_uhs()

Message ID 20250501063325.7262-9-wsa+renesas@sang-engineering.com
State New
Headers show
Series mmc: add '_can' to capability helpers | expand

Commit Message

Wolfram Sang May 1, 2025, 6:33 a.m. UTC 
It is not obvious that this functions checks capabilities. Rename it to
include '_can' like other capability helpers.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/mmc/core/host.h | 2 +-
 drivers/mmc/core/sd.c   | 8 ++++----
 drivers/mmc/core/sdio.c | 6 +++---
 3 files changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index 00ca88389ef9..c112191cad6a 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -54,7 +54,7 @@  static inline int mmc_boot_partition_access(struct mmc_host *host)
 	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
 }
 
-static inline int mmc_host_uhs(struct mmc_host *host)
+static inline int mmc_host_can_uhs(struct mmc_host *host)
 {
 	return host->caps &
 		(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 08ab076fe2f9..ec02067f03c5 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -455,7 +455,7 @@  static void sd_update_bus_speed_mode(struct mmc_card *card)
 	 * If the host doesn't support any of the UHS-I modes, fallback on
 	 * default speed.
 	 */
-	if (!mmc_host_uhs(card->host)) {
+	if (!mmc_host_can_uhs(card->host)) {
 		card->sd_bus_speed = 0;
 		return;
 	}
@@ -867,7 +867,7 @@  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 * to switch to 1.8V signaling level. If the card has failed
 	 * repeatedly to switch however, skip this.
 	 */
-	if (retries && mmc_host_uhs(host))
+	if (retries && mmc_host_can_uhs(host))
 		ocr |= SD_OCR_S18R;
 
 	/*
@@ -1509,7 +1509,7 @@  static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	 * signaling. Detect that situation and try to initialize a UHS-I (1.8V)
 	 * transfer mode.
 	 */
-	if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_uhs(host) &&
+	if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_can_uhs(host) &&
 	    mmc_sd_card_using_v18(card) &&
 	    host->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
 		if (mmc_host_set_uhs_voltage(host) ||
@@ -1524,7 +1524,7 @@  static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/* Initialization sequence for UHS-I cards */
-	if (rocr & SD_ROCR_S18A && mmc_host_uhs(host)) {
+	if (rocr & SD_ROCR_S18A && mmc_host_can_uhs(host)) {
 		err = mmc_sd_init_uhs_card(card);
 		if (err)
 			goto free_card;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4b19b8a16b09..0f753367aec1 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -198,7 +198,7 @@  static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
 			if (ret)
 				goto out;
 
-			if (mmc_host_uhs(card->host)) {
+			if (mmc_host_can_uhs(card->host)) {
 				if (data & SDIO_UHS_DDR50)
 					card->sw_caps.sd3_bus_mode
 						|= SD_MODE_UHS_DDR50 | SD_MODE_UHS_SDR50
@@ -527,7 +527,7 @@  static int sdio_set_bus_speed_mode(struct mmc_card *card)
 	 * If the host doesn't support any of the UHS-I modes, fallback on
 	 * default speed.
 	 */
-	if (!mmc_host_uhs(card->host))
+	if (!mmc_host_can_uhs(card->host))
 		return 0;
 
 	bus_speed = SDIO_SPEED_SDR12;
@@ -669,7 +669,7 @@  static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	WARN_ON(!host->claimed);
 
 	/* to query card if 1.8V signalling is supported */
-	if (mmc_host_uhs(host))
+	if (mmc_host_can_uhs(host))
 		ocr |= R4_18V_PRESENT;
 
 try_again: