diff mbox series

[v6,3/8] mmc: sdhci-of-dwcmshc: factor out code for th1520_init()

Message ID 23c6a81052a6dd3660d60348731229d60a209b32.1722847198.git.unicorn_wang@outlook.com
State New
Headers show
Series mmc: sdhci-of-dwcmshc: Add Sophgo SG2042 support | expand

Commit Message

Chen Wang Aug. 5, 2024, 9:17 a.m. UTC 
From: Chen Wang <unicorn_wang@outlook.com>

Different socs have initialization operations in
the probe process, which are summarized as functions.

This patch first factor out init function for th1520.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Tested-by: Drew Fustini <drew@pdp7.com> # TH1520
Tested-by: Inochi Amaoto <inochiama@outlook.com> # Duo and Huashan Pi
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 51 +++++++++++++++++------------
 1 file changed, 30 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index a002636d51fd..b272ec2ab232 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -830,6 +830,35 @@  static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)
 	}
 }
 
+static int th1520_init(struct device *dev,
+		       struct sdhci_host *host,
+		       struct dwcmshc_priv *dwc_priv)
+{
+	dwc_priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
+
+	if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
+	    device_property_read_bool(dev, "mmc-hs200-1_8v") ||
+	    device_property_read_bool(dev, "mmc-hs400-1_8v"))
+		dwc_priv->flags |= FLAG_IO_FIXED_1V8;
+	else
+		dwc_priv->flags &= ~FLAG_IO_FIXED_1V8;
+
+	/*
+	 * start_signal_voltage_switch() will try 3.3V first
+	 * then 1.8V. Use SDHCI_SIGNALING_180 rather than
+	 * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
+	 * in sdhci_start_signal_voltage_switch().
+	 */
+	if (dwc_priv->flags & FLAG_IO_FIXED_1V8) {
+		host->flags &= ~SDHCI_SIGNALING_330;
+		host->flags |=  SDHCI_SIGNALING_180;
+	}
+
+	sdhci_enable_v4_mode(host);
+
+	return 0;
+}
+
 static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1231,27 +1260,7 @@  static int dwcmshc_probe(struct platform_device *pdev)
 	}
 
 	if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) {
-		priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
-
-		if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
-		    device_property_read_bool(dev, "mmc-hs200-1_8v") ||
-		    device_property_read_bool(dev, "mmc-hs400-1_8v"))
-			priv->flags |= FLAG_IO_FIXED_1V8;
-		else
-			priv->flags &= ~FLAG_IO_FIXED_1V8;
-
-		/*
-		 * start_signal_voltage_switch() will try 3.3V first
-		 * then 1.8V. Use SDHCI_SIGNALING_180 rather than
-		 * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
-		 * in sdhci_start_signal_voltage_switch().
-		 */
-		if (priv->flags & FLAG_IO_FIXED_1V8) {
-			host->flags &= ~SDHCI_SIGNALING_330;
-			host->flags |=  SDHCI_SIGNALING_180;
-		}
-
-		sdhci_enable_v4_mode(host);
+		th1520_init(dev, host, priv);
 	}
 
 #ifdef CONFIG_ACPI