diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
deleted file mode 100644
index eb7eb1b529f0..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Spreadtrum SDHCI controller (sdhci-sprd)
-
-The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
-for MMC, SD and SDIO types of cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-sprd driver.
-
-Required properties:
-- compatible: Should contain "sprd,sdhci-r11".
-- reg: physical base address of the controller and length.
-- interrupts: Interrupts used by the SDHCI controller.
-- clocks: Should contain phandle for the clock feeding the SDHCI controller
-- clock-names: Should contain the following:
-	"sdio" - SDIO source clock (required)
-	"enable" - gate clock which used for enabling/disabling the device (required)
-	"2x_enable" - gate clock controlling the device for some special platforms (optional)
-
-Optional properties:
-- assigned-clocks: the same with "sdio" clock
-- assigned-clock-parents: the default parent of "sdio" clock
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin control
-- pinctrl-1: should contain uhs mode pin control
-
-PHY DLL delays are used to delay the data valid window, and align the window
-to sampling clock. PHY DLL delays can be configured by following properties,
-and each property contains 4 cells which are used to configure the clock data
-write line delay value, clock read command line delay value, clock read data
-positive edge delay value and clock read data negative edge delay value.
-Each cell's delay value unit is cycle of the PHY clock.
-
-- sprd,phy-delay-legacy: Delay value for legacy timing.
-- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
-- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
-- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
-- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing.
-- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing.
-- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing.
-
-Examples:
-
-sdio0: sdio@20600000 {
-	compatible  = "sprd,sdhci-r11";
-	reg = <0 0x20600000 0 0x1000>;
-	interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-
-	clock-names = "sdio", "enable";
-	clocks = <&ap_clk CLK_EMMC_2X>,
-		 <&apahb_gate CLK_EMMC_EB>;
-	assigned-clocks = <&ap_clk CLK_EMMC_2X>;
-	assigned-clock-parents = <&rpll CLK_RPLL_390M>;
-
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&sd0_pins_default>;
-	pinctrl-1 = <&sd0_pins_uhs>;
-
-	sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>;
-	bus-width = <8>;
-	non-removable;
-	no-sdio;
-	no-sd;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
diff --git a/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml
new file mode 100644
index 000000000000..3cf4a41e4ed8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SDHCI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,sdhci-r11
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SDIO source clock
+      - description: gate clock for enabling/disabling the device
+      - description: gate clock controlling the device for some special platforms (optional)
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sdio
+      - const: enable
+      - const: 2x_enable
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  pinctrl-0:
+    description: default/high speed pin control
+    maxItems: 1
+
+  pinctrl-1:
+    description: UHS mode pin control
+    maxItems: 1
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: state_uhs
+
+patternProperties:
+  "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$":
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: clock data write line delay value
+      - description: clock read command line delay value
+      - description: clock read data positive edge delay value
+      - description: clock read data negative edge delay value
+    description:
+      PHY DLL delays are used to delay the data valid window, and align
+      the window to the sampling clock. Each cell's delay value unit is
+      cycle of the PHY clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@50430000 {
+      compatible = "sprd,sdhci-r11";
+      reg = <0x50430000 0x1000>;
+      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&aon_prediv CLK_EMMC_2X>,
+               <&apahb_gate CLK_EMMC_EB>,
+               <&aon_gate CLK_EMMC_2X_EN>;
+      clock-names = "sdio", "enable", "2x_enable";
+      assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+      assigned-clock-parents = <&clk_l0_409m6>;
+
+      pinctrl-0 = <&sd0_pins_default>;
+      pinctrl-1 = <&sd0_pins_uhs>;
+      pinctrl-names = "default", "state_uhs";
+
+      bus-width = <8>;
+      cap-mmc-hw-reset;
+      mmc-hs400-enhanced-strobe;
+      mmc-hs400-1_8v;
+      mmc-hs200-1_8v;
+      mmc-ddr-1_8v;
+      non-removable;
+      no-sdio;
+      no-sd;
+
+      sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+      sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+      sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+      sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+    };
+...
