From patchwork Wed Apr 19 07:06:58 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Masahiro Yamada X-Patchwork-Id: 97609 Delivered-To: patch@linaro.org Received: by 10.140.109.52 with SMTP id k49csp185877qgf; Wed, 19 Apr 2017 00:08:39 -0700 (PDT) X-Received: by 10.99.112.72 with SMTP id a8mr1503555pgn.7.1492585719351; Wed, 19 Apr 2017 00:08:39 -0700 (PDT) Return-Path: Received: from bombadil.infradead.org (bombadil.infradead.org. [65.50.211.133]) by mx.google.com with ESMTPS id t134si1507278pgb.347.2017.04.19.00.08.39 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 19 Apr 2017 00:08:39 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-mtd-bounces+patch=linaro.org@lists.infradead.org designates 65.50.211.133 as permitted sender) client-ip=65.50.211.133; Authentication-Results: mx.google.com; dkim=pass header.i=@lists.infradead.org; dkim=neutral (body hash did not verify) header.i=@nifty.com; spf=pass (google.com: best guess record for domain of linux-mtd-bounces+patch=linaro.org@lists.infradead.org designates 65.50.211.133 as permitted sender) smtp.mailfrom=linux-mtd-bounces+patch=linaro.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=wN4N5YbY+Uhqoyab/9pg/1932OEhM7KJfvLjhveBFmU=; b=iVN5Xt6LrCqOeSKOjUKBZ4R1nz UfnN2+Wzekv1bSZvYYPXGbZguay3QWFJqvA1U8CYhEFOVVONNH1WL4IlyLn2uzQ8aAxjD/w3+ZGhc 11pJGC+nhzKWvIoAKjeHFojE8Hv2GDh4eKG5xaFYEMrFlRpCh9i9DsZ/CyPWUFl3Aw4iImhOYw12E 0Cj4lbi5cHFLLkWSSMJqblLC7ln8+Ifj1CC+VkdCNb5OVZ4k4DHomqRlrKTEopoZiCCEwLFqdfpiR BoIDaBbOPnrU0bMKGimPC0eGY7vWjOOieI+Mp7Dv31kRKGQ/Lu5iXP35gQyBqz0r2YpeNdpzjrSoE f4mH6/Cg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1d0jj8-0000Hd-Uv; Wed, 19 Apr 2017 07:08:34 +0000 Received: from conuserg-10.nifty.com ([210.131.2.77]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1d0jie-0008DY-C5 for linux-mtd@lists.infradead.org; Wed, 19 Apr 2017 07:08:14 +0000 Received: from pug.e01.socionext.com (p14092-ipngnfx01kyoto.kyoto.ocn.ne.jp [153.142.97.92]) (authenticated) by conuserg-10.nifty.com with ESMTP id v3J771hY010893; Wed, 19 Apr 2017 16:07:04 +0900 DKIM-Filter: OpenDKIM Filter v2.10.3 conuserg-10.nifty.com v3J771hY010893 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nifty.com; s=dec2015msa; t=1492585625; bh=1v/FQMfec5/R2tBFLoJSpaSv6FZZs7XaZfW+JQ61hWA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=dC7kGFo6LmjyKrBQuDc6yo9wd3zB88VWBHVJAoLIZ5Cwh8dWoXrh89ITiw/jcuDEF DfldIih8OETDQziPSK7v2sZcwjJFSc4bLgWC7C8v8UeoRrp+DjX4mo7d0YJkHCA9HL RHFt5HoSVg4mLqQ1h6eWTmzpcao1mlV2/cpjZUnHCShnCIROCRhYzVGjWTXYrmDDBv v/AZKVYXa7lUP7dW5LmwbloCjMM39ZThCqap5bJ89YlfhFlCNrJu1ZJUK/oKfWAadp Ex9GzHKddt268gYMMjVylV5TvCdBlOVVDRHgQ/M/OwQkZ20xM+f8aBpXyx0aX+JiHC +8L7DsiI9EFZw== X-Nifty-SrcIP: [153.142.97.92] From: Masahiro Yamada To: linux-mtd@lists.infradead.org Subject: [PATCH 2/2] mtd: nand: denali: show how to use generic helpers (do not apply) Date: Wed, 19 Apr 2017 16:06:58 +0900 Message-Id: <1492585618-13655-3-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1492585618-13655-1-git-send-email-yamada.masahiro@socionext.com> References: <1492585618-13655-1-git-send-email-yamada.masahiro@socionext.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20170419_000805_064485_B9485ADA X-CRM114-Status: GOOD ( 27.93 ) X-Spam-Score: -1.2 (-) X-Spam-Report: SpamAssassin version 3.4.1 on bombadil.infradead.org summary: Content analysis details: (-1.2 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.7 SPF_SOFTFAIL SPF: sender does not match SPF record (softfail) -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , Boris Brezillon , Richard Weinberger , Dinh Nguyen , Masahiro Yamada , Artem Bityutskiy , Cyrille Pitchen , linux-kernel@vger.kernel.org, Marek Vasut , devicetree@vger.kernel.org, Rob Herring , Masami Hiramatsu , Chuanxiao Dong , Jassi Brar , Brian Norris , Enrico Jorns , David Woodhouse , Graham Moore MIME-Version: 1.0 Sender: "linux-mtd" Errors-To: linux-mtd-bounces+patch=linaro.org@lists.infradead.org This patch shows how the previous commit is used in a driver. Please do not apply this. (This is applicable on linux next-20170418) Signed-off-by: Masahiro Yamada --- .../devicetree/bindings/mtd/denali-nand.txt | 17 + drivers/mtd/nand/denali.c | 1693 +++++++++----------- drivers/mtd/nand/denali.h | 297 ++-- drivers/mtd/nand/denali_dt.c | 29 +- drivers/mtd/nand/denali_pci.c | 11 +- 5 files changed, 969 insertions(+), 1078 deletions(-) -- 2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/ diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index e593bbe..0b08ea5 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -3,10 +3,27 @@ Required properties: - compatible : should be one of the following: "altr,socfpga-denali-nand" - for Altera SOCFPGA + "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) + "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. +Optional properties: + - nand-ecc-step-size: must be 512 or 1024. If not specified, default to: + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + see nand.txt for details. + - nand-ecc-strength: see nand.txt for details. Available values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details + +Note: +Either nand-ecc-strength or nand-ecc-maximize should be specified. + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 16634df..15fefd9 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -23,52 +23,21 @@ #include #include #include +#include #include "denali.h" MODULE_LICENSE("GPL"); -/* - * We define a module parameter that allows the user to override - * the hardware and decide what timing mode should be used. - */ -#define NAND_DEFAULT_TIMINGS -1 - -static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; -module_param(onfi_timing_mode, int, S_IRUGO); -MODULE_PARM_DESC(onfi_timing_mode, - "Overrides default ONFI setting. -1 indicates use default timings"); - #define DENALI_NAND_NAME "denali-nand" /* - * We define a macro here that combines all interrupts this driver uses into - * a single constant value, for convenience. - */ -#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \ - INTR__ECC_TRANSACTION_DONE | \ - INTR__ECC_ERR | \ - INTR__PROGRAM_FAIL | \ - INTR__LOAD_COMP | \ - INTR__PROGRAM_COMP | \ - INTR__TIME_OUT | \ - INTR__ERASE_FAIL | \ - INTR__RST_COMP | \ - INTR__ERASE_COMP) - -/* * indicates whether or not the internal value for the flash bank is * valid or not */ #define CHIP_SELECT_INVALID -1 /* - * This macro divides two integers and rounds fractional values up - * to the nearest integer value. - */ -#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y))) - -/* * this macro allows us to convert from an MTD structure to our own * device context (denali) structure. */ @@ -85,8 +54,7 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) #define MAIN_ACCESS 0x42 #define MAIN_SPARE_ACCESS 0x43 -#define DENALI_READ 0 -#define DENALI_WRITE 0x100 +#define DENALI_NR_BANKS 4 /* * this is a helper macro that allows us to @@ -94,13 +62,13 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) */ #define BANK(x) ((x) << 24) -/* forward declarations */ -static void clear_interrupts(struct denali_nand_info *denali); -static uint32_t wait_for_irq(struct denali_nand_info *denali, - uint32_t irq_mask); -static void denali_irq_enable(struct denali_nand_info *denali, - uint32_t int_mask); -static uint32_t read_interrupt_status(struct denali_nand_info *denali); +/* + * The bus interface clock, clk_x, is phase aligned with the core clock. The + * clk_x is an integral multiple N of the core clk. The value N is configured + * at IP delivery time, and its available value is 4, 5, or 6. We need to align + * to the largest value to make it work with any possible configuration. + */ +#define DENALI_CLK_X_MULT 6 /* * Certain operations for the denali NAND controller use an indexed mode to @@ -115,595 +83,244 @@ static void index_addr(struct denali_nand_info *denali, iowrite32(data, denali->flash_mem + 0x10); } -/* Perform an indexed read of the device */ -static void index_addr_read_data(struct denali_nand_info *denali, - uint32_t address, uint32_t *pdata) -{ - iowrite32(address, denali->flash_mem); - *pdata = ioread32(denali->flash_mem + 0x10); -} - /* - * We need to buffer some data for some of the NAND core routines. - * The operations manage buffering that data. + * Use the configuration feature register to determine the maximum number of + * banks that the hardware supports. */ -static void reset_buf(struct denali_nand_info *denali) -{ - denali->buf.head = denali->buf.tail = 0; -} - -static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) -{ - denali->buf.buf[denali->buf.tail++] = byte; -} - -/* reads the status of the device */ -static void read_status(struct denali_nand_info *denali) +static void detect_max_banks(struct denali_nand_info *denali) { - uint32_t cmd; + uint32_t features = ioread32(denali->flash_reg + FEATURES); - /* initialize the data buffer to store status */ - reset_buf(denali); + denali->max_banks = 1 << (features & FEATURES__N_BANKS); - cmd = ioread32(denali->flash_reg + WRITE_PROTECT); - if (cmd) - write_byte_to_buf(denali, NAND_STATUS_WP); - else - write_byte_to_buf(denali, 0); + /* the encoding changed from rev 5.0 to 5.1 */ + if (denali->revision < 0x0501) + denali->max_banks <<= 1; } -/* resets a specific device connected to the core */ -static void reset_bank(struct denali_nand_info *denali) +static void denali_enable_irq(struct denali_nand_info *denali) { - uint32_t irq_status; - uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT; - - clear_interrupts(denali); - - iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); - - irq_status = wait_for_irq(denali, irq_mask); + int i; - if (irq_status & INTR__TIME_OUT) - dev_err(denali->dev, "reset bank failed.\n"); + for (i = 0; i < DENALI_NR_BANKS; i++) + iowrite32(U32_MAX, denali->flash_reg + INTR_EN(i)); + iowrite32(GLOBAL_INT_EN_FLAG, denali->flash_reg + GLOBAL_INT_ENABLE); } -/* Reset the flash controller */ -static uint16_t denali_nand_reset(struct denali_nand_info *denali) +static void denali_disable_irq(struct denali_nand_info *denali) { int i; - for (i = 0; i < denali->max_banks; i++) - iowrite32(INTR__RST_COMP | INTR__TIME_OUT, - denali->flash_reg + INTR_STATUS(i)); - - for (i = 0; i < denali->max_banks; i++) { - iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); - while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) & - (INTR__RST_COMP | INTR__TIME_OUT))) - cpu_relax(); - if (ioread32(denali->flash_reg + INTR_STATUS(i)) & - INTR__TIME_OUT) - dev_dbg(denali->dev, - "NAND Reset operation timed out on bank %d\n", i); - } - - for (i = 0; i < denali->max_banks; i++) - iowrite32(INTR__RST_COMP | INTR__TIME_OUT, - denali->flash_reg + INTR_STATUS(i)); - - return PASS; + for (i = 0; i < DENALI_NR_BANKS; i++) + iowrite32(0, denali->flash_reg + INTR_EN(i)); + iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); } -/* - * this routine calculates the ONFI timing values for a given mode and - * programs the clocking register accordingly. The mode is determined by - * the get_onfi_nand_para routine. - */ -static void nand_onfi_timing_set(struct denali_nand_info *denali, - uint16_t mode) +static void denali_clear_irq(struct denali_nand_info *denali, + int bank, uint32_t irq_status) { - uint16_t Trea[6] = {40, 30, 25, 20, 20, 16}; - uint16_t Trp[6] = {50, 25, 17, 15, 12, 10}; - uint16_t Treh[6] = {30, 15, 15, 10, 10, 7}; - uint16_t Trc[6] = {100, 50, 35, 30, 25, 20}; - uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15}; - uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5}; - uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25}; - uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70}; - uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60}; - uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15}; - - uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid; - uint16_t dv_window = 0; - uint16_t en_lo, en_hi; - uint16_t acc_clks; - uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; - - en_lo = CEIL_DIV(Trp[mode], CLK_X); - en_hi = CEIL_DIV(Treh[mode], CLK_X); -#if ONFI_BLOOM_TIME - if ((en_hi * CLK_X) < (Treh[mode] + 2)) - en_hi++; -#endif - - if ((en_lo + en_hi) * CLK_X < Trc[mode]) - en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X); - - if ((en_lo + en_hi) < CLK_MULTI) - en_lo += CLK_MULTI - en_lo - en_hi; - - while (dv_window < 8) { - data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode]; - - data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode]; - - data_invalid = data_invalid_rhoh < data_invalid_rloh ? - data_invalid_rhoh : data_invalid_rloh; - - dv_window = data_invalid - Trea[mode]; - - if (dv_window < 8) - en_lo++; - } - - acc_clks = CEIL_DIV(Trea[mode], CLK_X); - - while (acc_clks * CLK_X - Trea[mode] < 3) - acc_clks++; - - if (data_invalid - acc_clks * CLK_X < 2) - dev_warn(denali->dev, "%s, Line %d: Warning!\n", - __FILE__, __LINE__); - - addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); - re_2_we = CEIL_DIV(Trhw[mode], CLK_X); - re_2_re = CEIL_DIV(Trhz[mode], CLK_X); - we_2_re = CEIL_DIV(Twhr[mode], CLK_X); - cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X); - if (cs_cnt == 0) - cs_cnt = 1; - - if (Tcea[mode]) { - while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode]) - cs_cnt++; - } - -#if MODE5_WORKAROUND - if (mode == 5) - acc_clks = 5; -#endif - - /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ - if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 && - ioread32(denali->flash_reg + DEVICE_ID) == 0x88) - acc_clks = 6; - - iowrite32(acc_clks, denali->flash_reg + ACC_CLKS); - iowrite32(re_2_we, denali->flash_reg + RE_2_WE); - iowrite32(re_2_re, denali->flash_reg + RE_2_RE); - iowrite32(we_2_re, denali->flash_reg + WE_2_RE); - iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA); - iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); + /* write one to clear bits */ + iowrite32(irq_status, denali->flash_reg + INTR_STATUS(bank)); } -/* queries the NAND device to see what ONFI modes it supports. */ -static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) +static void denali_clear_irq_all(struct denali_nand_info *denali) { int i; - /* - * we needn't to do a reset here because driver has already - * reset all the banks before - */ - if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - ONFI_TIMING_MODE__VALUE)) - return FAIL; - - for (i = 5; i > 0; i--) { - if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - (0x01 << i)) - break; - } - - nand_onfi_timing_set(denali, i); - - /* - * By now, all the ONFI devices we know support the page cache - * rw feature. So here we enable the pipeline_rw_ahead feature - */ - /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */ - /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */ - - return PASS; + for (i = 0; i < DENALI_NR_BANKS; i++) + denali_clear_irq(denali, i, U32_MAX); } -static void get_samsung_nand_para(struct denali_nand_info *denali, - uint8_t device_id) +static irqreturn_t denali_isr(int irq, void *dev_id) { - if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ - /* Set timing register values according to datasheet */ - iowrite32(5, denali->flash_reg + ACC_CLKS); - iowrite32(20, denali->flash_reg + RE_2_WE); - iowrite32(12, denali->flash_reg + WE_2_RE); - iowrite32(14, denali->flash_reg + ADDR_2_DATA); - iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(2, denali->flash_reg + CS_SETUP_CNT); - } -} + struct denali_nand_info *denali = dev_id; + irqreturn_t ret = IRQ_NONE; + uint32_t irq_status; + int i; -static void get_toshiba_nand_para(struct denali_nand_info *denali) -{ - /* - * Workaround to fix a controller bug which reports a wrong - * spare area size for some kind of Toshiba NAND device - */ - if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && - (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) - iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); -} + spin_lock(&denali->irq_lock); -static void get_hynix_nand_para(struct denali_nand_info *denali, - uint8_t device_id) -{ - switch (device_id) { - case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ - case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ - iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK); - iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); - iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - iowrite32(0, denali->flash_reg + DEVICE_WIDTH); - break; - default: - dev_warn(denali->dev, - "Unknown Hynix NAND (Device ID: 0x%x).\n" - "Will use default parameter values instead.\n", - device_id); - } -} + for (i = 0; i < DENALI_NR_BANKS; i++) { + irq_status = ioread32(denali->flash_reg + INTR_STATUS(i)); + if (irq_status) + ret = IRQ_HANDLED; -/* - * determines how many NAND chips are connected to the controller. Note for - * Intel CE4100 devices we don't support more than one device. - */ -static void find_valid_banks(struct denali_nand_info *denali) -{ - uint32_t id[denali->max_banks]; - int i; + denali_clear_irq(denali, i, irq_status); - denali->total_used_banks = 1; - for (i = 0; i < denali->max_banks; i++) { - index_addr(denali, MODE_11 | (i << 24) | 0, 0x90); - index_addr(denali, MODE_11 | (i << 24) | 1, 0); - index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]); + if (i != denali->flash_bank) + continue; - dev_dbg(denali->dev, - "Return 1st ID for bank[%d]: %x\n", i, id[i]); + denali->irq_status |= irq_status; - if (i == 0) { - if (!(id[i] & 0x0ff)) - break; /* WTF? */ - } else { - if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) - denali->total_used_banks++; - else - break; - } - } - - if (denali->platform == INTEL_CE4100) { - /* - * Platform limitations of the CE4100 device limit - * users to a single chip solution for NAND. - * Multichip support is not enabled. - */ - if (denali->total_used_banks != 1) { - dev_err(denali->dev, - "Sorry, Intel CE4100 only supports a single NAND device.\n"); - BUG(); - } + if (denali->irq_status & denali->irq_mask) + complete(&denali->complete); } - dev_dbg(denali->dev, - "denali->total_used_banks: %d\n", denali->total_used_banks); -} - -/* - * Use the configuration feature register to determine the maximum number of - * banks that the hardware supports. - */ -static void detect_max_banks(struct denali_nand_info *denali) -{ - uint32_t features = ioread32(denali->flash_reg + FEATURES); - denali->max_banks = 1 << (features & FEATURES__N_BANKS); + spin_unlock(&denali->irq_lock); - /* the encoding changed from rev 5.0 to 5.1 */ - if (denali->revision < 0x0501) - denali->max_banks <<= 1; + return ret; } -static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) +static void denali_reset_irq(struct denali_nand_info *denali) { - uint16_t status = PASS; - uint32_t id_bytes[8], addr; - uint8_t maf_id, device_id; - int i; - - /* - * Use read id method to get device ID and other params. - * For some NAND chips, controller can't report the correct - * device ID by reading from DEVICE_ID register - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, 0); - for (i = 0; i < 8; i++) - index_addr_read_data(denali, addr | 2, &id_bytes[i]); - maf_id = id_bytes[0]; - device_id = id_bytes[1]; - - if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & - ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ - if (FAIL == get_onfi_nand_para(denali)) - return FAIL; - } else if (maf_id == 0xEC) { /* Samsung NAND */ - get_samsung_nand_para(denali, device_id); - } else if (maf_id == 0x98) { /* Toshiba NAND */ - get_toshiba_nand_para(denali); - } else if (maf_id == 0xAD) { /* Hynix NAND */ - get_hynix_nand_para(denali, device_id); - } - - dev_info(denali->dev, - "Dump timing register values:\n" - "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" - "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" - "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", - ioread32(denali->flash_reg + ACC_CLKS), - ioread32(denali->flash_reg + RE_2_WE), - ioread32(denali->flash_reg + RE_2_RE), - ioread32(denali->flash_reg + WE_2_RE), - ioread32(denali->flash_reg + ADDR_2_DATA), - ioread32(denali->flash_reg + RDWR_EN_LO_CNT), - ioread32(denali->flash_reg + RDWR_EN_HI_CNT), - ioread32(denali->flash_reg + CS_SETUP_CNT)); - - find_valid_banks(denali); - - /* - * If the user specified to override the default timings - * with a specific ONFI mode, we apply those changes here. - */ - if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) - nand_onfi_timing_set(denali, onfi_timing_mode); + unsigned long flags; - return status; + spin_lock_irqsave(&denali->irq_lock, flags); + denali->irq_status = 0; + denali->irq_mask = 0; + spin_unlock_irqrestore(&denali->irq_lock, flags); } -static void denali_set_intr_modes(struct denali_nand_info *denali, - uint16_t INT_ENABLE) +static uint32_t denali_wait_for_irq(struct denali_nand_info *denali, + uint32_t irq_mask) { - if (INT_ENABLE) - iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE); - else - iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); -} + unsigned long time_left, flags; + uint32_t irq_status; -/* - * validation function to verify that the controlling software is making - * a valid request - */ -static inline bool is_flash_bank_valid(int flash_bank) -{ - return flash_bank >= 0 && flash_bank < 4; -} + spin_lock_irqsave(&denali->irq_lock, flags); -static void denali_irq_init(struct denali_nand_info *denali) -{ - uint32_t int_mask; - int i; + irq_status = denali->irq_status; - /* Disable global interrupts */ - denali_set_intr_modes(denali, false); + if (irq_mask & irq_status) { + spin_unlock_irqrestore(&denali->irq_lock, flags); + return irq_status; + } - int_mask = DENALI_IRQ_ALL; + denali->irq_mask = irq_mask; + reinit_completion(&denali->complete); + spin_unlock_irqrestore(&denali->irq_lock, flags); - /* Clear all status bits */ - for (i = 0; i < denali->max_banks; ++i) - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i)); + time_left = wait_for_completion_timeout(&denali->complete, + msecs_to_jiffies(1000)); + if (!time_left) { + dev_err(denali->dev, "timeout while waiting for irq 0x%x\n", + denali->irq_mask); + return 0; + } - denali_irq_enable(denali, int_mask); + return denali->irq_status; } -static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) +static uint32_t denali_check_irq(struct denali_nand_info *denali) { - denali_set_intr_modes(denali, false); -} + unsigned long flags; + uint32_t irq_status; -static void denali_irq_enable(struct denali_nand_info *denali, - uint32_t int_mask) -{ - int i; + spin_lock_irqsave(&denali->irq_lock, flags); + irq_status = denali->irq_status; + spin_unlock_irqrestore(&denali->irq_lock, flags); - for (i = 0; i < denali->max_banks; ++i) - iowrite32(int_mask, denali->flash_reg + INTR_EN(i)); + return irq_status; } /* - * This function only returns when an interrupt that this driver cares about - * occurs. This is to reduce the overhead of servicing interrupts + * This helper function setups the registers for ECC and whether or not + * the spare area will be transferred. */ -static inline uint32_t denali_irq_detected(struct denali_nand_info *denali) +static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, + bool transfer_spare) { - return read_interrupt_status(denali) & DENALI_IRQ_ALL; + int ecc_en_flag, transfer_spare_flag; + + /* set ECC, transfer spare bits if needed */ + ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; + transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; + + /* Enable spare area/ECC per user's request. */ + iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); + iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } -/* Interrupts are cleared by writing a 1 to the appropriate status bit */ -static inline void clear_interrupt(struct denali_nand_info *denali, - uint32_t irq_mask) +static uint8_t denali_read_byte(struct mtd_info *mtd) { - uint32_t intr_status_reg; + struct denali_nand_info *denali = mtd_to_denali(mtd); - intr_status_reg = INTR_STATUS(denali->flash_bank); + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); - iowrite32(irq_mask, denali->flash_reg + intr_status_reg); + return ioread32(denali->flash_mem + 0x10); } -static void clear_interrupts(struct denali_nand_info *denali) +static void denali_write_byte(struct mtd_info *mtd, uint8_t byte) { - uint32_t status; - - spin_lock_irq(&denali->irq_lock); - - status = read_interrupt_status(denali); - clear_interrupt(denali, status); + struct denali_nand_info *denali = mtd_to_denali(mtd); - denali->irq_status = 0x0; - spin_unlock_irq(&denali->irq_lock); + index_addr(denali, MODE_11 | BANK(denali->flash_bank) | 2, byte); } -static uint32_t read_interrupt_status(struct denali_nand_info *denali) +static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - uint32_t intr_status_reg; + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; - intr_status_reg = INTR_STATUS(denali->flash_bank); + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); - return ioread32(denali->flash_reg + intr_status_reg); + for (i = 0; i < len; i++) + buf[i] = ioread32(denali->flash_mem + 0x10); } -/* - * This is the interrupt service routine. It handles all interrupts - * sent to this device. Note that on CE4100, this is a shared interrupt. - */ -static irqreturn_t denali_isr(int irq, void *dev_id) +static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { - struct denali_nand_info *denali = dev_id; - uint32_t irq_status; - irqreturn_t result = IRQ_NONE; + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; - spin_lock(&denali->irq_lock); + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); - /* check to see if a valid NAND chip has been selected. */ - if (is_flash_bank_valid(denali->flash_bank)) { - /* - * check to see if controller generated the interrupt, - * since this is a shared interrupt - */ - irq_status = denali_irq_detected(denali); - if (irq_status != 0) { - /* handle interrupt */ - /* first acknowledge it */ - clear_interrupt(denali, irq_status); - /* - * store the status in the device context for someone - * to read - */ - denali->irq_status |= irq_status; - /* notify anyone who cares that it happened */ - complete(&denali->complete); - /* tell the OS that we've handled this */ - result = IRQ_HANDLED; - } - } - spin_unlock(&denali->irq_lock); - return result; + for (i = 0; i < len; i++) + iowrite32(buf[i], denali->flash_mem + 0x10); } -static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) +static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { - unsigned long comp_res; - uint32_t intr_status; - unsigned long timeout = msecs_to_jiffies(1000); - - do { - comp_res = - wait_for_completion_timeout(&denali->complete, timeout); - spin_lock_irq(&denali->irq_lock); - intr_status = denali->irq_status; - - if (intr_status & irq_mask) { - denali->irq_status &= ~irq_mask; - spin_unlock_irq(&denali->irq_lock); - /* our interrupt was detected */ - break; - } - - /* - * these are not the interrupts you are looking for - - * need to wait again - */ - spin_unlock_irq(&denali->irq_lock); - } while (comp_res != 0); + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint16_t *buf16 = (uint16_t *)buf; + int i; - if (comp_res == 0) { - /* timeout */ - pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n", - intr_status, irq_mask); + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); - intr_status = 0; - } - return intr_status; + for (i = 0; i < len / 2; i++) + buf16[i] = ioread32(denali->flash_mem + 0x10); } -/* - * This helper function setups the registers for ECC and whether or not - * the spare area will be transferred. - */ -static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, - bool transfer_spare) +static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, + int len) { - int ecc_en_flag, transfer_spare_flag; + struct denali_nand_info *denali = mtd_to_denali(mtd); + const uint16_t *buf16 = (const uint16_t *)buf; + int i; - /* set ECC, transfer spare bits if needed */ - ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; - transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); - /* Enable spare area/ECC per user's request. */ - iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); + for (i = 0; i < len / 2; i++) + iowrite32(buf16[i], denali->flash_mem + 0x10); } -/* - * sends a pipeline command operation to the controller. See the Denali NAND - * controller's user guide for more information (section 4.2.3.6). - */ -static int denali_send_pipeline_cmd(struct denali_nand_info *denali, - bool ecc_en, bool transfer_spare, - int access_type, int op) +static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) { - int status = PASS; - uint32_t addr, cmd; - - setup_ecc_for_xfer(denali, ecc_en, transfer_spare); + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t type; - clear_interrupts(denali); + if (ctrl & NAND_CLE) + type = 0; + else if (ctrl & NAND_ALE) + type = 1; + else + return; - addr = BANK(denali->flash_bank) | denali->page; + /* + * Some commands are followed by chip->dev_ready or chip->waitfunc. + * irq_status must be cleared here to catch the R/B# interrupt later. + */ + if (ctrl & NAND_CTRL_CHANGE) + denali_reset_irq(denali); - if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { - /* read spare area */ - cmd = MODE_10 | addr; - index_addr(denali, cmd, access_type); + index_addr(denali, MODE_11 | BANK(denali->flash_bank) | type, dat); +} - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } else if (op == DENALI_READ) { - /* setup page read request for access type */ - cmd = MODE_10 | addr; - index_addr(denali, cmd, access_type); +static int denali_dev_ready(struct mtd_info *mtd) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } - return status; + return !!(denali_check_irq(denali) & INTR__INT_ACT); } /* helper function that simply writes a buffer to the flash */ @@ -748,71 +365,6 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, return i * 4; /* intent is to return the number of bytes read */ } -/* writes OOB data to the device */ -static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_status; - uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL; - int status = 0; - - denali->page = page; - - if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, - DENALI_WRITE) == PASS) { - write_data_to_flash_mem(denali, buf, mtd->oobsize); - - /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); - - if (irq_status == 0) { - dev_err(denali->dev, "OOB write failed\n"); - status = -EIO; - } - } else { - dev_err(denali->dev, "unable to send pipeline command\n"); - status = -EIO; - } - return status; -} - -/* reads OOB data from the device */ -static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_mask = INTR__LOAD_COMP; - uint32_t irq_status, addr, cmd; - - denali->page = page; - - if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, - DENALI_READ) == PASS) { - read_data_from_flash_mem(denali, buf, mtd->oobsize); - - /* - * wait for command to be accepted - * can always use status0 bit as the - * mask is identical for each bank. - */ - irq_status = wait_for_irq(denali, irq_mask); - - if (irq_status == 0) - dev_err(denali->dev, "page on OOB timeout %d\n", - denali->page); - - /* - * We set the device back to MAIN_ACCESS here as I observed - * instability with the controller if you do a block erase - * and the last transaction was a SPARE_ACCESS. Block erase - * is reliable (according to the MTD test infrastructure) - * if you are in MAIN_ACCESS. - */ - addr = BANK(denali->flash_bank) | denali->page; - cmd = MODE_10 | addr; - index_addr(denali, cmd, MAIN_ACCESS); - } -} - static int denali_check_erased_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, unsigned long uncor_ecc_flags, @@ -886,8 +438,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -#define ECC_SECTOR_SIZE 512 - #define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) #define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) @@ -899,15 +449,16 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, struct denali_nand_info *denali, unsigned long *uncor_ecc_flags, uint8_t *buf) { + unsigned int ecc_size = denali->nand.ecc.size; unsigned int bitflips = 0; unsigned int max_bitflips = 0; uint32_t err_addr, err_cor_info; unsigned int err_byte, err_sector, err_device; uint8_t err_cor_value; unsigned int prev_sector = 0; + uint32_t irq_status; - /* read the ECC errors. we'll ignore them for now */ - denali_set_intr_modes(denali, false); + denali_reset_irq(denali); do { err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); @@ -928,9 +479,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, * an erased sector. */ *uncor_ecc_flags |= BIT(err_sector); - } else if (err_byte < ECC_SECTOR_SIZE) { + } else if (err_byte < ecc_size) { /* - * If err_byte is larger than ECC_SECTOR_SIZE, means error + * If err_byte is larger than ecc_size, means error * happened in OOB, so we ignore it. It's no need for * us to correct it err_device is represented the NAND * error bits are happened in if there are more than @@ -939,7 +490,7 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, int offset; unsigned int flips_in_byte; - offset = (err_sector * ECC_SECTOR_SIZE + err_byte) * + offset = (err_sector * ecc_size + err_byte) * denali->devnum + err_device; /* correct the ECC error */ @@ -959,10 +510,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, * ECC_TRANSACTION_DONE interrupt, so here just wait for * a while for this interrupt */ - while (!(read_interrupt_status(denali) & INTR__ECC_TRANSACTION_DONE)) - cpu_relax(); - clear_interrupts(denali); - denali_set_intr_modes(denali, true); + irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE); + if (!(irq_status & INTR__ECC_TRANSACTION_DONE)) + return -EIO; return max_bitflips; } @@ -974,13 +524,13 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en) ioread32(denali->flash_reg + DMA_ENABLE); } -static void denali_setup_dma64(struct denali_nand_info *denali, int op) +static void denali_setup_dma64(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { uint32_t mode; const int page_count = 1; - uint64_t addr = denali->buf.dma_buf; - mode = MODE_10 | BANK(denali->flash_bank) | denali->page; + mode = MODE_10 | BANK(denali->flash_bank) | page; /* DMA is a three step process */ @@ -988,191 +538,352 @@ static void denali_setup_dma64(struct denali_nand_info *denali, int op) * 1. setup transfer type, interrupt when complete, * burst len = 64 bytes, the number of pages */ - index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count); + index_addr(denali, mode, + 0x01002000 | (64 << 16) | (write << 8) | page_count); /* 2. set memory low address */ - index_addr(denali, mode, addr); + index_addr(denali, mode, dma_addr); /* 3. set memory high address */ - index_addr(denali, mode, addr >> 32); + index_addr(denali, mode, (uint64_t)dma_addr >> 32); } -static void denali_setup_dma32(struct denali_nand_info *denali, int op) +static void denali_setup_dma32(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { uint32_t mode; const int page_count = 1; - uint32_t addr = denali->buf.dma_buf; mode = MODE_10 | BANK(denali->flash_bank); /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - index_addr(denali, mode | denali->page, 0x2000 | op | page_count); + index_addr(denali, mode | page, 0x2000 | (write << 8) | page_count); /* 2. set memory high address bits 23:8 */ - index_addr(denali, mode | ((addr >> 16) << 8), 0x2200); + index_addr(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300); + index_addr(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ index_addr(denali, mode | 0x14000, 0x2400); } -static void denali_setup_dma(struct denali_nand_info *denali, int op) +static void denali_setup_dma(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { if (denali->caps & DENALI_CAP_DMA_64BIT) - denali_setup_dma64(denali, op); + denali_setup_dma64(denali, dma_addr, page, write); else - denali_setup_dma32(denali, op); + denali_setup_dma32(denali, dma_addr, page, write); } -/* - * writes a page. user specifies type, and this function handles the - * configuration details. - */ -static int write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, bool raw_xfer) +static int denali_pio_read(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw) { - struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; + uint32_t addr = BANK(denali->flash_bank) | page; + uint32_t irq_status, ecc_err_mask; + + /* setup page read request for access type */ + index_addr(denali, MODE_10 | addr, + raw ? MAIN_SPARE_ACCESS : MAIN_ACCESS); + + iowrite32(MODE_01 | addr, denali->flash_mem); + + if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) + ecc_err_mask = INTR__ECC_UNCOR_ERR; + else + ecc_err_mask = INTR__ECC_ERR; + + denali_reset_irq(denali); + + read_data_from_flash_mem(denali, buf, size); + + irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC); + if (!(irq_status & INTR__PAGE_XFER_INC)) + return -EIO; + + if (irq_status & INTR__ERASED_PAGE) + memset(buf, 0xff, size); + + return irq_status & ecc_err_mask ? -EBADMSG : 0; +} + +static int denali_pio_write(struct denali_nand_info *denali, + const void *buf, size_t size, int page, int raw) +{ + uint32_t addr = BANK(denali->flash_bank) | page; uint32_t irq_status; - uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL; - /* - * if it is a raw xfer, we want to disable ecc and send the spare area. - * !raw_xfer - enable ecc - * raw_xfer - transfer spare - */ - setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer); + /* setup page read request for access type */ + index_addr(denali, MODE_10 | addr, + raw ? MAIN_SPARE_ACCESS : MAIN_ACCESS); + + iowrite32(MODE_01 | addr, denali->flash_mem); + + denali_reset_irq(denali); + + write_data_to_flash_mem(denali, buf, size); + + irq_status = denali_wait_for_irq(denali, + INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL); + if (!(irq_status & INTR__PROGRAM_COMP)) + return -EIO; + + return 0; +} - /* copy buffer into DMA buffer */ - memcpy(denali->buf.buf, buf, mtd->writesize); +static int denali_pio_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) +{ + if (write) + return denali_pio_write(denali, buf, size, page, raw); + else + return denali_pio_read(denali, buf, size, page, raw); +} - if (raw_xfer) { - /* transfer the data to the spare area */ - memcpy(denali->buf.buf + mtd->writesize, - chip->oob_poi, - mtd->oobsize); +static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) +{ + dma_addr_t dma_addr; + uint32_t irq_mask, irq_status, ecc_err_mask; + enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + int ret = 0; + + dma_addr = dma_map_single(denali->dev, buf, size, dir); + if (dma_mapping_error(denali->dev, dma_addr)) { + dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n"); + return denali_pio_xfer(denali, buf, size, page, raw, write); } - dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE); + if (write) { + irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL; + ecc_err_mask = 0; + } else if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) { + irq_mask = INTR__DMA_CMD_COMP; + ecc_err_mask = INTR__ECC_UNCOR_ERR; + } else { + irq_mask = INTR__DMA_CMD_COMP; + ecc_err_mask = INTR__ECC_ERR; + } - clear_interrupts(denali); denali_enable_dma(denali, true); - denali_setup_dma(denali, DENALI_WRITE); + denali_reset_irq(denali); + denali_setup_dma(denali, dma_addr, page, write); /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); - - if (irq_status == 0) { - dev_err(denali->dev, "timeout on write_page (type = %d)\n", - raw_xfer); - denali->status = NAND_STATUS_FAIL; - } + irq_status = denali_wait_for_irq(denali, irq_mask); + if (!(irq_status & INTR__DMA_CMD_COMP)) + ret = -EIO; + else if (irq_status & ecc_err_mask) + ret = -EBADMSG; denali_enable_dma(denali, false); - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE); + dma_unmap_single(denali->dev, dma_addr, size, dir); - return 0; -} + if (irq_status & INTR__ERASED_PAGE) + memset(buf, 0xff, size); -/* NAND core entry points */ + return ret; +} -/* - * this is the callback that the NAND core calls to write a page. Since - * writing a page with ECC or without is similar, all the work is done - * by write_page above. - */ -static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page) +static int denali_data_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) { - /* - * for regular page writes, we let HW handle all the ECC - * data written to the device. - */ - return write_page(mtd, chip, buf, false); + setup_ecc_for_xfer(denali, !raw, raw); + + if (denali->dma_avail) + return denali_dma_xfer(denali, buf, size, page, raw, write); + else + return denali_pio_xfer(denali, buf, size, page, raw, write); } -/* - * This is the callback that the NAND core calls to write a page without ECC. - * raw access is similar to ECC page writes, so all the work is done in the - * write_page() function above. - */ -static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, - int page) +static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip, + int page, int write) { - /* - * for raw page writes, we want to disable ECC and simply write - * whatever data is in the buffer. - */ - return write_page(mtd, chip, buf, true); + struct denali_nand_info *denali = mtd_to_denali(mtd); + unsigned int start_cmd = write ? NAND_CMD_SEQIN : NAND_CMD_READ0; + unsigned int rnd_cmd = write ? NAND_CMD_RNDIN : NAND_CMD_RNDOUT; + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + uint8_t *bufpoi = chip->oob_poi; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int bbm_skip = denali->bbtskipbytes; + size_t size = writesize + oobsize; + int i, pos, len; + + /* BBM at the beginning of the OOB area */ + chip->cmdfunc(mtd, start_cmd, writesize, page); + if (write) + chip->write_buf(mtd, bufpoi, bbm_skip); + else + chip->read_buf(mtd, bufpoi, bbm_skip); + bufpoi += bbm_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += bbm_skip; + else if (pos + len > writesize) + len = writesize - pos; + + chip->cmdfunc(mtd, rnd_cmd, pos, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); + bufpoi += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + chip->cmdfunc(mtd, rnd_cmd, writesize + bbm_skip, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); + bufpoi += len; + } + } + + /* OOB free */ + len = oobsize - (bufpoi - chip->oob_poi); + chip->cmdfunc(mtd, rnd_cmd, size - len, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); } -static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page) +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { - return write_oob_data(mtd, chip->oob_poi, page); + struct denali_nand_info *denali = mtd_to_denali(mtd); + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + void *dma_buf = denali->buf; + int bbm_skip = denali->bbtskipbytes; + size_t size = writesize + oobsize; + int ret, i, pos, len; + + ret = denali_data_xfer(denali, dma_buf, size, page, 1, 0); + if (ret) + return ret; + + /* Arrange the buffer for syndrome payload/ecc layout */ + if (buf) { + for (i = 0; i < ecc_steps; i++) { + pos = i * (ecc_size + ecc_bytes); + len = ecc_size; + + if (pos >= writesize) + pos += bbm_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(buf, dma_buf + pos, len); + buf += len; + if (len < ecc_size) { + len = ecc_size - len; + memcpy(buf, dma_buf + writesize + bbm_skip, + len); + buf += len; + } + } + } + + if (oob_required) { + uint8_t *oob = chip->oob_poi; + + /* BBM at the beginning of the OOB area */ + memcpy(oob, dma_buf + writesize, bbm_skip); + oob += bbm_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += bbm_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(oob, dma_buf + pos, len); + oob += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + memcpy(oob, dma_buf + writesize + bbm_skip, + len); + oob += len; + } + } + + /* OOB free */ + len = oobsize - (oob - chip->oob_poi); + memcpy(oob, dma_buf + size - len, len); + } + + return 0; } static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - read_oob_data(mtd, chip->oob_poi, page); + denali_oob_xfer(mtd, chip, page, 0); return 0; } -static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) +static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; - uint32_t irq_status; - uint32_t irq_mask = denali->caps & DENALI_CAP_HW_ECC_FIXUP ? - INTR__DMA_CMD_COMP | INTR__ECC_UNCOR_ERR : - INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR; - unsigned long uncor_ecc_flags = 0; - int stat = 0; - - if (page != denali->page) { - dev_err(denali->dev, - "IN %s: page %d is not equal to denali->page %d", - __func__, page, denali->page); - BUG(); - } + int status; - setup_ecc_for_xfer(denali, true, false); + denali_reset_irq(denali); - denali_enable_dma(denali, true); - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); + denali_oob_xfer(mtd, chip, page, 1); - clear_interrupts(denali); - denali_setup_dma(denali, DENALI_READ); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); - /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); + return status & NAND_STATUS_FAIL ? -EIO : 0; +} - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); +static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + unsigned long uncor_ecc_flags = 0; + int stat = 0; + int ret; - memcpy(buf, denali->buf.buf, mtd->writesize); + ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0); + if (ret && ret != -EBADMSG) + return ret; if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags); - else if (irq_status & INTR__ECC_ERR) + else if (ret == -EBADMSG) stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf); - denali_enable_dma(denali, false); if (stat < 0) return stat; if (uncor_ecc_flags) { - read_oob_data(mtd, chip->oob_poi, denali->page); + ret = denali_read_oob(mtd, chip, page); + if (ret) + return ret; stat = denali_check_erased_page(mtd, chip, buf, uncor_ecc_flags, stat); @@ -1181,137 +892,268 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, return stat; } -static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) +static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; - uint32_t irq_mask = INTR__DMA_CMD_COMP; - - if (page != denali->page) { - dev_err(denali->dev, - "IN %s: page %d is not equal to denali->page %d", - __func__, page, denali->page); - BUG(); - } - - setup_ecc_for_xfer(denali, false, true); - denali_enable_dma(denali, true); - - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); - - clear_interrupts(denali); - denali_setup_dma(denali, DENALI_READ); - - /* wait for operation to complete */ - wait_for_irq(denali, irq_mask); + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + void *dma_buf = denali->buf; + int bbm_skip = denali->bbtskipbytes; + size_t size = writesize + oobsize; + int i, pos, len; - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); + /* + * Fill the buffer with 0xff first except the full page transfer. + * This simplifies the logic. + */ + if (!buf || !oob_required) + memset(dma_buf, 0xff, size); + + /* Arrange the buffer for syndrome payload/ecc layout */ + if (buf) { + for (i = 0; i < ecc_steps; i++) { + pos = i * (ecc_size + ecc_bytes); + len = ecc_size; + + if (pos >= writesize) + pos += bbm_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(dma_buf + pos, buf, len); + buf += len; + if (len < ecc_size) { + len = ecc_size - len; + memcpy(dma_buf + writesize + bbm_skip, buf, + len); + buf += len; + } + } + } - denali_enable_dma(denali, false); + if (oob_required) { + const uint8_t *oob = chip->oob_poi; + + /* BBM at the beginning of the OOB area */ + memcpy(dma_buf + writesize, oob, bbm_skip); + oob += bbm_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += bbm_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(dma_buf + pos, oob, len); + oob += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + memcpy(dma_buf + writesize + bbm_skip, oob, + len); + oob += len; + } + } - memcpy(buf, denali->buf.buf, mtd->writesize); - memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize); + /* OOB free */ + len = oobsize - (oob - chip->oob_poi); + memcpy(dma_buf + size - len, oob, len); + } - return 0; + return denali_data_xfer(denali, dma_buf, size, page, 1, 1); } -static uint8_t denali_read_byte(struct mtd_info *mtd) +static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint8_t result = 0xff; - if (denali->buf.head < denali->buf.tail) - result = denali->buf.buf[denali->buf.head++]; - - return result; + return denali_data_xfer(denali, (void *)buf, mtd->writesize, + page, 0, 1); } static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); - spin_lock_irq(&denali->irq_lock); denali->flash_bank = chip; - spin_unlock_irq(&denali->irq_lock); } static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); - int status = denali->status; + uint32_t irq_status; - denali->status = 0; + /* R/B# pin transitioned from low to high? */ + irq_status = denali_wait_for_irq(denali, INTR__INT_ACT); - return status; + return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL; } static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t cmd, irq_status; - clear_interrupts(denali); + denali_reset_irq(denali); /* setup page read request for access type */ cmd = MODE_10 | BANK(denali->flash_bank) | page; index_addr(denali, cmd, 0x1); /* wait for erase to complete or failure to occur */ - irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL); + irq_status = denali_wait_for_irq(denali, + INTR__ERASE_COMP | INTR__ERASE_FAIL); - return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS; + return irq_status & INTR__ERASE_COMP ? 0 : NAND_STATUS_FAIL; } -static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, - int page) +#define DIV_ROUND_DOWN_ULL(ll, d) \ + ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; }) + +static int denali_setup_data_interface(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t addr, id; + const struct nand_sdr_timings *timings; + unsigned long t_clk; + int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data; + int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup; + int addr_2_data_mask; + uint32_t tmp; + + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return PTR_ERR(timings); + + /* clk_x period in picoseconds */ + t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate); + if (!t_clk) + return -EINVAL; + + if (check_only) + return 0; + + /* tREA -> ACC_CLKS */ + acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk); + acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE); + + tmp = ioread32(denali->flash_reg + ACC_CLKS); + tmp &= ~ACC_CLKS__VALUE; + tmp |= acc_clks; + iowrite32(tmp, denali->flash_reg + ACC_CLKS); + + /* tRWH -> RE_2_WE */ + re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk); + re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE); + + tmp = ioread32(denali->flash_reg + RE_2_WE); + tmp &= ~RE_2_WE__VALUE; + tmp |= re_2_we; + iowrite32(tmp, denali->flash_reg + RE_2_WE); + + /* tRHZ -> RE_2_RE */ + re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk); + re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE); + + tmp = ioread32(denali->flash_reg + RE_2_RE); + tmp &= ~RE_2_RE__VALUE; + tmp |= re_2_re; + iowrite32(tmp, denali->flash_reg + RE_2_RE); + + /* tWHR -> WE_2_RE */ + we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); + we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); + + tmp = ioread32(denali->flash_reg + TWHR2_AND_WE_2_RE); + tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; + tmp |= we_2_re; + iowrite32(tmp, denali->flash_reg + TWHR2_AND_WE_2_RE); + + /* tADL -> ADDR_2_DATA */ + + /* for older versions, ADDR_2_DATA is only 6 bit wide */ + addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA; + if (denali->revision < 0x0501) + addr_2_data_mask >>= 1; + + addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk); + addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); + + tmp = ioread32(denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + tmp &= ~addr_2_data_mask; + tmp |= addr_2_data; + iowrite32(tmp, denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + + /* tREH, tWH -> RDWR_EN_HI_CNT */ + rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min), + t_clk); + rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + RDWR_EN_HI_CNT); + tmp &= ~RDWR_EN_HI_CNT__VALUE; + tmp |= rdwr_en_hi; + iowrite32(tmp, denali->flash_reg + RDWR_EN_HI_CNT); + + /* tRP, tWP -> RDWR_EN_LO_CNT */ + rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), + t_clk); + rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min), + t_clk); + rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT); + rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi); + rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + RDWR_EN_LO_CNT); + tmp &= ~RDWR_EN_LO_CNT__VALUE; + tmp |= rdwr_en_lo; + iowrite32(tmp, denali->flash_reg + RDWR_EN_LO_CNT); + + /* tCS, tCEA -> CS_SETUP_CNT */ + cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo, + (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks, + 0); + cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + CS_SETUP_CNT); + tmp &= ~CS_SETUP_CNT__VALUE; + tmp |= cs_setup; + iowrite32(tmp, denali->flash_reg + CS_SETUP_CNT); + + return 0; +} + +static void denali_reset_banks(struct denali_nand_info *denali) +{ + u32 irq_status; int i; - switch (cmd) { - case NAND_CMD_PAGEPROG: - break; - case NAND_CMD_STATUS: - read_status(denali); - break; - case NAND_CMD_READID: - case NAND_CMD_PARAM: - reset_buf(denali); - /* - * sometimes ManufactureId read from register is not right - * e.g. some of Micron MT29F32G08QAA MLC NAND chips - * So here we send READID cmd to NAND insteand - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, col); - for (i = 0; i < 8; i++) { - index_addr_read_data(denali, addr | 2, &id); - write_byte_to_buf(denali, id); - } - break; - case NAND_CMD_READ0: - case NAND_CMD_SEQIN: - denali->page = page; - break; - case NAND_CMD_RESET: - reset_bank(denali); - break; - case NAND_CMD_READOOB: - /* TODO: Read OOB data */ - break; - default: - pr_err(": unsupported command received 0x%x\n", cmd); - break; + for (i = 0; i < denali->max_banks; i++) { + denali->flash_bank = i; + + denali_reset_irq(denali); + + iowrite32(DEVICE_RESET__BANK(i), + denali->flash_reg + DEVICE_RESET); + + irq_status = denali_wait_for_irq(denali, + INTR__RST_COMP | INTR__INT_ACT | INTR__TIME_OUT); + if (!(irq_status & INTR__INT_ACT)) + break; } + + dev_dbg(denali->dev, "%d chips connected\n", i); + denali->max_banks = i; } -/* end NAND core entry points */ -/* Initialization code to bring the device up to a known good state */ static void denali_hw_init(struct denali_nand_info *denali) { /* @@ -1331,7 +1173,6 @@ static void denali_hw_init(struct denali_nand_info *denali) denali->bbtskipbytes = ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES); detect_max_banks(denali); - denali_nand_reset(denali); iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED); iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE); @@ -1341,17 +1182,25 @@ static void denali_hw_init(struct denali_nand_info *denali) /* Should set value for these registers when init */ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); iowrite32(1, denali->flash_reg + ECC_ENABLE); - denali_nand_timing_set(denali); - denali_irq_init(denali); } -/* - * Althogh controller spec said SLC ECC is forceb to be 4bit, - * but denali controller in MRST only support 15bit and 8bit ECC - * correction - */ -#define ECC_8BITS 14 -#define ECC_15BITS 26 +static int denali_calc_ecc_bytes(const struct nand_ecc_setting *setting) +{ + int coef; + + switch (setting->step) { + case 512: + coef = 13; + break; + case 1024: + coef = 14; + break; + default: + return -ENOTSUPP; + } + + return DIV_ROUND_UP(setting->strength * coef, 16) * 2; +} static int denali_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) @@ -1388,29 +1237,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = { .free = denali_ooblayout_free, }; -static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; -static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; - -static struct nand_bbt_descr bbt_main_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 8, - .len = 4, - .veroffs = 12, - .maxblocks = 4, - .pattern = bbt_pattern, -}; - -static struct nand_bbt_descr bbt_mirror_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 8, - .len = 4, - .veroffs = 12, - .maxblocks = 4, - .pattern = mirror_pattern, -}; - /* initialize driver data structures */ static void denali_drv_init(struct denali_nand_info *denali) { @@ -1425,12 +1251,6 @@ static void denali_drv_init(struct denali_nand_info *denali) * element that might be access shared data (interrupt status) */ spin_lock_init(&denali->irq_lock); - - /* indicate that MTD has not selected a valid bank yet */ - denali->flash_bank = CHIP_SELECT_INVALID; - - /* initialize our irq_status variable to indicate no interrupts */ - denali->irq_status = 0; } static int denali_multidev_fixup(struct denali_nand_info *denali) @@ -1488,29 +1308,15 @@ int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; struct mtd_info *mtd = nand_to_mtd(chip); + struct nand_ecc_engine_caps ecc_engine_caps; int ret; - if (denali->platform == INTEL_CE4100) { - /* - * Due to a silicon limitation, we can only support - * ONFI timing mode 1 and below. - */ - if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { - pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n"); - return -EINVAL; - } - } - - /* allocate a temporary buffer for nand_scan_ident() */ - denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE, - GFP_DMA | GFP_KERNEL); - if (!denali->buf.buf) - return -ENOMEM; - mtd->dev.parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); + denali_clear_irq_all(denali); + /* Request IRQ after all the hardware initialization is finished */ ret = devm_request_irq(denali->dev, denali->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali); @@ -1519,8 +1325,11 @@ int denali_init(struct denali_nand_info *denali) return ret; } - /* now that our ISR is registered, we can enable interrupts */ - denali_set_intr_modes(denali, true); + denali_enable_irq(denali); + denali_reset_banks(denali); + + denali->flash_bank = CHIP_SELECT_INVALID; + nand_set_flash_node(chip, denali->dev->of_node); /* Fallback to the default name if DT did not give "label" property */ if (!mtd->name) @@ -1528,9 +1337,14 @@ int denali_init(struct denali_nand_info *denali) /* register the driver with the NAND core subsystem */ chip->select_chip = denali_select_chip; - chip->cmdfunc = denali_cmdfunc; chip->read_byte = denali_read_byte; + chip->write_byte = denali_write_byte; + chip->cmd_ctrl = denali_cmd_ctrl; + chip->dev_ready = denali_dev_ready; chip->waitfunc = denali_waitfunc; + /* clk rate info is needed for setup_data_interface */ + if (denali->clk_x_rate) + chip->setup_data_interface = denali_setup_data_interface; /* * scan for NAND devices attached to the controller @@ -1539,33 +1353,24 @@ int denali_init(struct denali_nand_info *denali) */ ret = nand_scan_ident(mtd, denali->max_banks, NULL); if (ret) - goto failed_req_irq; - - /* allocate the right size buffer now */ - devm_kfree(denali->dev, denali->buf.buf); - denali->buf.buf = devm_kzalloc(denali->dev, - mtd->writesize + mtd->oobsize, - GFP_KERNEL); - if (!denali->buf.buf) { - ret = -ENOMEM; - goto failed_req_irq; - } + goto disable_irq; - ret = dma_set_mask(denali->dev, - DMA_BIT_MASK(denali->caps & DENALI_CAP_DMA_64BIT ? - 64 : 32)); - if (ret) { - dev_err(denali->dev, "No usable DMA configuration\n"); - goto failed_req_irq; + if (ioread32(denali->flash_reg + FEATURES) & FEATURES__DMA) + denali->dma_avail = 1; + + if (denali->dma_avail) { + int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32; + + ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit)); + if (ret) { + dev_info(denali->dev, "Failed to set DMA mask. Disabling DMA.\n"); + denali->dma_avail = 0; + } } - denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf, - mtd->writesize + mtd->oobsize, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) { - dev_err(denali->dev, "Failed to map DMA buffer\n"); - ret = -EIO; - goto failed_req_irq; + if (denali->dma_avail) { + chip->options |= NAND_USE_BOUNCE_BUFFER; + chip->buf_align = 16; } /* @@ -1574,46 +1379,74 @@ int denali_init(struct denali_nand_info *denali) * bad block management. */ - /* Bad block management */ - chip->bbt_td = &bbt_main_descr; - chip->bbt_md = &bbt_mirror_descr; - - /* skip the scan for now until we have OOB read and write support */ chip->bbt_options |= NAND_BBT_USE_FLASH; - chip->options |= NAND_SKIP_BBTSCAN; + chip->bbt_options |= NAND_BBT_NO_OOB; + chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* no subpage writes on denali */ chip->options |= NAND_NO_SUBPAGE_WRITE; + ecc_engine_caps.ecc_settings = denali->avail_ecc_settings; + ecc_engine_caps.calc_ecc_bytes = denali_calc_ecc_bytes; + ecc_engine_caps.avail_oobsize = mtd->oobsize - denali->bbtskipbytes; + + ret = -ENOTSUPP; + + /* If both .size and .strength are set (by DT), we check if supported */ + ret = nand_check_ecc_caps(mtd, chip, &ecc_engine_caps); + if (ret && ret != -ENODATA) + dev_info(denali->dev, "try to find other ECC settings\n"); + /* - * Denali Controller only support 15bit and 8bit ECC in MRST, - * so just let controller do 15bit ECC for MLC and 8bit ECC for - * SLC if possible. - * */ - if (!nand_is_slc(chip) && - (mtd->oobsize > (denali->bbtskipbytes + - ECC_15BITS * (mtd->writesize / - ECC_SECTOR_SIZE)))) { - /* if MLC OOB size is large enough, use 15bit ECC*/ - chip->ecc.strength = 15; - chip->ecc.bytes = ECC_15BITS; - iowrite32(15, denali->flash_reg + ECC_CORRECTION); - } else if (mtd->oobsize < (denali->bbtskipbytes + - ECC_8BITS * (mtd->writesize / - ECC_SECTOR_SIZE))) { - pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes"); - goto failed_req_irq; - } else { - chip->ecc.strength = 8; - chip->ecc.bytes = ECC_8BITS; - iowrite32(8, denali->flash_reg + ECC_CORRECTION); + * We want .size and .strength closest to the chip's requirement + * unless NAND_ECC_MAXIMIZE is requested. + */ + if (ret && !(chip->ecc.options & NAND_ECC_MAXIMIZE)) { + ret = nand_try_to_match_ecc_req(mtd, chip, &ecc_engine_caps); + if (ret) + dev_info(denali->dev, "try to maximize ECC setting\n"); } + /* The last thing we can do is to try the max ECC strength */ + if (ret) + ret = nand_try_to_maximize_ecc(mtd, chip, &ecc_engine_caps); + + if (ret) { + dev_err(denali->dev, "failed to choose ECC size/strength\n"); + goto disable_irq; + } + + dev_dbg(denali->dev, + "chosen ECC settings: step=%d, strength=%d, bytes=%d\n", + chip->ecc.size, chip->ecc.strength, chip->ecc.bytes); + + iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, + chip->ecc.strength + 1), + denali->flash_reg + ECC_CORRECTION); + iowrite32(mtd->erasesize / mtd->writesize, + denali->flash_reg + PAGES_PER_BLOCK); + iowrite32(denali->nand.options & NAND_BUSWIDTH_16 ? 1 : 0, + denali->flash_reg + DEVICE_WIDTH); + iowrite32(mtd->writesize, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); + iowrite32(mtd->oobsize, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + + iowrite32(chip->ecc.size, denali->flash_reg + CFG_DATA_BLOCK_SIZE); + iowrite32(chip->ecc.size, denali->flash_reg + CFG_LAST_DATA_BLOCK_SIZE); + /* chip->ecc.steps is set by nand_scan_tail(); not available here */ + iowrite32(mtd->writesize / chip->ecc.size, + denali->flash_reg + CFG_NUM_DATA_BLOCKS); + mtd_set_ooblayout(mtd, &denali_ooblayout_ops); - /* override the default read operations */ - chip->ecc.size = ECC_SECTOR_SIZE; + if (denali->nand.options & NAND_BUSWIDTH_16) { + chip->read_buf = denali_read_buf16; + chip->write_buf = denali_write_buf16; + } else { + chip->read_buf = denali_read_buf; + chip->write_buf = denali_write_buf; + } + chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS; chip->ecc.read_page = denali_read_page; chip->ecc.read_page_raw = denali_read_page_raw; chip->ecc.write_page = denali_write_page; @@ -1624,21 +1457,34 @@ int denali_init(struct denali_nand_info *denali) ret = denali_multidev_fixup(denali); if (ret) - goto failed_req_irq; + goto disable_irq; + + /* + * This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not + * use devm_kmalloc() because the memory allocated by devm_ does not + * guarantee DMA-safe alignment. + */ + denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); + if (!denali->buf) { + ret = -ENOMEM; + goto disable_irq; + } ret = nand_scan_tail(mtd); if (ret) - goto failed_req_irq; + goto free_buf; ret = mtd_device_register(mtd, NULL, 0); if (ret) { dev_err(denali->dev, "Failed to register MTD: %d\n", ret); - goto failed_req_irq; + goto free_buf; } return 0; -failed_req_irq: - denali_irq_cleanup(denali->irq, denali); +free_buf: + kfree(denali->buf); +disable_irq: + denali_disable_irq(denali); return ret; } @@ -1656,8 +1502,9 @@ void denali_remove(struct denali_nand_info *denali) int bufsize = mtd->writesize + mtd->oobsize; nand_release(mtd); - denali_irq_cleanup(denali->irq, denali); - dma_unmap_single(denali->dev, denali->buf.dma_buf, bufsize, + kfree(denali->buf); + denali_disable_irq(denali); + dma_unmap_single(denali->dev, denali->dma_addr, bufsize, DMA_BIDIRECTIONAL); } EXPORT_SYMBOL(denali_remove); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index ec00485..46406c6 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -24,325 +24,318 @@ #include #define DEVICE_RESET 0x0 -#define DEVICE_RESET__BANK0 0x0001 -#define DEVICE_RESET__BANK1 0x0002 -#define DEVICE_RESET__BANK2 0x0004 -#define DEVICE_RESET__BANK3 0x0008 +#define DEVICE_RESET__BANK(bank) BIT(bank) #define TRANSFER_SPARE_REG 0x10 -#define TRANSFER_SPARE_REG__FLAG 0x0001 +#define TRANSFER_SPARE_REG__FLAG BIT(0) #define LOAD_WAIT_CNT 0x20 -#define LOAD_WAIT_CNT__VALUE 0xffff +#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0) #define PROGRAM_WAIT_CNT 0x30 -#define PROGRAM_WAIT_CNT__VALUE 0xffff +#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0) #define ERASE_WAIT_CNT 0x40 -#define ERASE_WAIT_CNT__VALUE 0xffff +#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0) #define INT_MON_CYCCNT 0x50 -#define INT_MON_CYCCNT__VALUE 0xffff +#define INT_MON_CYCCNT__VALUE GENMASK(15, 0) #define RB_PIN_ENABLED 0x60 -#define RB_PIN_ENABLED__BANK0 0x0001 -#define RB_PIN_ENABLED__BANK1 0x0002 -#define RB_PIN_ENABLED__BANK2 0x0004 -#define RB_PIN_ENABLED__BANK3 0x0008 +#define RB_PIN_ENABLED__BANK(bank) BIT(bank) #define MULTIPLANE_OPERATION 0x70 -#define MULTIPLANE_OPERATION__FLAG 0x0001 +#define MULTIPLANE_OPERATION__FLAG BIT(0) #define MULTIPLANE_READ_ENABLE 0x80 -#define MULTIPLANE_READ_ENABLE__FLAG 0x0001 +#define MULTIPLANE_READ_ENABLE__FLAG BIT(0) #define COPYBACK_DISABLE 0x90 -#define COPYBACK_DISABLE__FLAG 0x0001 +#define COPYBACK_DISABLE__FLAG BIT(0) #define CACHE_WRITE_ENABLE 0xa0 -#define CACHE_WRITE_ENABLE__FLAG 0x0001 +#define CACHE_WRITE_ENABLE__FLAG BIT(0) #define CACHE_READ_ENABLE 0xb0 -#define CACHE_READ_ENABLE__FLAG 0x0001 +#define CACHE_READ_ENABLE__FLAG BIT(0) #define PREFETCH_MODE 0xc0 -#define PREFETCH_MODE__PREFETCH_EN 0x0001 -#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0 +#define PREFETCH_MODE__PREFETCH_EN BIT(0) +#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4) #define CHIP_ENABLE_DONT_CARE 0xd0 -#define CHIP_EN_DONT_CARE__FLAG 0x01 +#define CHIP_EN_DONT_CARE__FLAG BIT(0) #define ECC_ENABLE 0xe0 -#define ECC_ENABLE__FLAG 0x0001 +#define ECC_ENABLE__FLAG BIT(0) #define GLOBAL_INT_ENABLE 0xf0 -#define GLOBAL_INT_EN_FLAG 0x01 +#define GLOBAL_INT_EN_FLAG BIT(0) -#define WE_2_RE 0x100 -#define WE_2_RE__VALUE 0x003f +#define TWHR2_AND_WE_2_RE 0x100 +#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0) +#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8) -#define ADDR_2_DATA 0x110 -#define ADDR_2_DATA__VALUE 0x003f +#define TCWAW_AND_ADDR_2_DATA 0x110 +/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */ +#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0) +#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8) #define RE_2_WE 0x120 -#define RE_2_WE__VALUE 0x003f +#define RE_2_WE__VALUE GENMASK(5, 0) #define ACC_CLKS 0x130 -#define ACC_CLKS__VALUE 0x000f +#define ACC_CLKS__VALUE GENMASK(3, 0) #define NUMBER_OF_PLANES 0x140 -#define NUMBER_OF_PLANES__VALUE 0x0007 +#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0) #define PAGES_PER_BLOCK 0x150 -#define PAGES_PER_BLOCK__VALUE 0xffff +#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0) #define DEVICE_WIDTH 0x160 -#define DEVICE_WIDTH__VALUE 0x0003 +#define DEVICE_WIDTH__VALUE GENMASK(1, 0) #define DEVICE_MAIN_AREA_SIZE 0x170 -#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff +#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0) #define DEVICE_SPARE_AREA_SIZE 0x180 -#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff +#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0) #define TWO_ROW_ADDR_CYCLES 0x190 -#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001 +#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0) #define MULTIPLANE_ADDR_RESTRICT 0x1a0 -#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001 +#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0) #define ECC_CORRECTION 0x1b0 -#define ECC_CORRECTION__VALUE 0x001f +#define ECC_CORRECTION__VALUE GENMASK(4, 0) +#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16) +#define MAKE_ECC_CORRECTION(val, thresh) \ + (((val) & (ECC_CORRECTION__VALUE)) | \ + (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD))) #define READ_MODE 0x1c0 -#define READ_MODE__VALUE 0x000f +#define READ_MODE__VALUE GENMASK(3, 0) #define WRITE_MODE 0x1d0 -#define WRITE_MODE__VALUE 0x000f +#define WRITE_MODE__VALUE GENMASK(3, 0) #define COPYBACK_MODE 0x1e0 -#define COPYBACK_MODE__VALUE 0x000f +#define COPYBACK_MODE__VALUE GENMASK(3, 0) #define RDWR_EN_LO_CNT 0x1f0 -#define RDWR_EN_LO_CNT__VALUE 0x001f +#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0) #define RDWR_EN_HI_CNT 0x200 -#define RDWR_EN_HI_CNT__VALUE 0x001f +#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0) #define MAX_RD_DELAY 0x210 -#define MAX_RD_DELAY__VALUE 0x000f +#define MAX_RD_DELAY__VALUE GENMASK(3, 0) #define CS_SETUP_CNT 0x220 -#define CS_SETUP_CNT__VALUE 0x001f +#define CS_SETUP_CNT__VALUE GENMASK(4, 0) +#define CS_SETUP_CNT__TWB GENMASK(17, 12) #define SPARE_AREA_SKIP_BYTES 0x230 -#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f +#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0) #define SPARE_AREA_MARKER 0x240 -#define SPARE_AREA_MARKER__VALUE 0xffff +#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0) #define DEVICES_CONNECTED 0x250 -#define DEVICES_CONNECTED__VALUE 0x0007 +#define DEVICES_CONNECTED__VALUE GENMASK(2, 0) #define DIE_MASK 0x260 -#define DIE_MASK__VALUE 0x00ff +#define DIE_MASK__VALUE GENMASK(7, 0) #define FIRST_BLOCK_OF_NEXT_PLANE 0x270 -#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff +#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0) #define WRITE_PROTECT 0x280 -#define WRITE_PROTECT__FLAG 0x0001 +#define WRITE_PROTECT__FLAG BIT(0) #define RE_2_RE 0x290 -#define RE_2_RE__VALUE 0x003f +#define RE_2_RE__VALUE GENMASK(5, 0) #define MANUFACTURER_ID 0x300 -#define MANUFACTURER_ID__VALUE 0x00ff +#define MANUFACTURER_ID__VALUE GENMASK(7, 0) #define DEVICE_ID 0x310 -#define DEVICE_ID__VALUE 0x00ff +#define DEVICE_ID__VALUE GENMASK(7, 0) #define DEVICE_PARAM_0 0x320 -#define DEVICE_PARAM_0__VALUE 0x00ff +#define DEVICE_PARAM_0__VALUE GENMASK(7, 0) #define DEVICE_PARAM_1 0x330 -#define DEVICE_PARAM_1__VALUE 0x00ff +#define DEVICE_PARAM_1__VALUE GENMASK(7, 0) #define DEVICE_PARAM_2 0x340 -#define DEVICE_PARAM_2__VALUE 0x00ff +#define DEVICE_PARAM_2__VALUE GENMASK(7, 0) #define LOGICAL_PAGE_DATA_SIZE 0x350 -#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff +#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0) #define LOGICAL_PAGE_SPARE_SIZE 0x360 -#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff +#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0) #define REVISION 0x370 -#define REVISION__VALUE 0xffff +#define REVISION__VALUE GENMASK(15, 0) #define ONFI_DEVICE_FEATURES 0x380 -#define ONFI_DEVICE_FEATURES__VALUE 0x003f +#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0) #define ONFI_OPTIONAL_COMMANDS 0x390 -#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f +#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0) #define ONFI_TIMING_MODE 0x3a0 -#define ONFI_TIMING_MODE__VALUE 0x003f +#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0) #define ONFI_PGM_CACHE_TIMING_MODE 0x3b0 -#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f +#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0) #define ONFI_DEVICE_NO_OF_LUNS 0x3c0 -#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff -#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100 +#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0) +#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8) #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0 -#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0) #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0 -#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff - -#define FEATURES 0x3f0 -#define FEATURES__N_BANKS 0x0003 -#define FEATURES__ECC_MAX_ERR 0x003c -#define FEATURES__DMA 0x0040 -#define FEATURES__CMD_DMA 0x0080 -#define FEATURES__PARTITION 0x0100 -#define FEATURES__XDMA_SIDEBAND 0x0200 -#define FEATURES__GPREG 0x0400 -#define FEATURES__INDEX_ADDR 0x0800 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0) + +#define FEATURES 0x3f0 +#define FEATURES__N_BANKS GENMASK(1, 0) +#define FEATURES__ECC_MAX_ERR GENMASK(5, 2) +#define FEATURES__DMA BIT(6) +#define FEATURES__CMD_DMA BIT(7) +#define FEATURES__PARTITION BIT(8) +#define FEATURES__XDMA_SIDEBAND BIT(9) +#define FEATURES__GPREG BIT(10) +#define FEATURES__INDEX_ADDR BIT(11) #define TRANSFER_MODE 0x400 -#define TRANSFER_MODE__VALUE 0x0003 +#define TRANSFER_MODE__VALUE GENMASK(1, 0) -#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) -#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) +#define INTR_STATUS(bank) (0x410 + (bank) * 0x50) +#define INTR_EN(bank) (0x420 + (bank) * 0x50) /* bit[1:0] is used differently depending on IP version */ -#define INTR__ECC_UNCOR_ERR 0x0001 /* new IP */ -#define INTR__ECC_TRANSACTION_DONE 0x0001 /* old IP */ -#define INTR__ECC_ERR 0x0002 /* old IP */ -#define INTR__DMA_CMD_COMP 0x0004 -#define INTR__TIME_OUT 0x0008 -#define INTR__PROGRAM_FAIL 0x0010 -#define INTR__ERASE_FAIL 0x0020 -#define INTR__LOAD_COMP 0x0040 -#define INTR__PROGRAM_COMP 0x0080 -#define INTR__ERASE_COMP 0x0100 -#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR__LOCKED_BLK 0x0400 -#define INTR__UNSUP_CMD 0x0800 -#define INTR__INT_ACT 0x1000 -#define INTR__RST_COMP 0x2000 -#define INTR__PIPE_CMD_ERR 0x4000 -#define INTR__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) -#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) -#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) +#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */ +#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */ +#define INTR__ECC_ERR BIT(1) /* old IP */ +#define INTR__DMA_CMD_COMP BIT(2) +#define INTR__TIME_OUT BIT(3) +#define INTR__PROGRAM_FAIL BIT(4) +#define INTR__ERASE_FAIL BIT(5) +#define INTR__LOAD_COMP BIT(6) +#define INTR__PROGRAM_COMP BIT(7) +#define INTR__ERASE_COMP BIT(8) +#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9) +#define INTR__LOCKED_BLK BIT(10) +#define INTR__UNSUP_CMD BIT(11) +#define INTR__INT_ACT BIT(12) +#define INTR__RST_COMP BIT(13) +#define INTR__PIPE_CMD_ERR BIT(14) +#define INTR__PAGE_XFER_INC BIT(15) +#define INTR__ERASED_PAGE BIT(16) + +#define PAGE_CNT(bank) (0x430 + (bank) * 0x50) +#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50) +#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50) #define ECC_THRESHOLD 0x600 -#define ECC_THRESHOLD__VALUE 0x03ff +#define ECC_THRESHOLD__VALUE GENMASK(9, 0) #define ECC_ERROR_BLOCK_ADDRESS 0x610 -#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff +#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0) #define ECC_ERROR_PAGE_ADDRESS 0x620 -#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff -#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000 +#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0) +#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12) #define ECC_ERROR_ADDRESS 0x630 -#define ECC_ERROR_ADDRESS__OFFSET 0x0fff -#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000 +#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0) +#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12) #define ERR_CORRECTION_INFO 0x640 -#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff -#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00 -#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000 -#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000 +#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0) +#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8) +#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14) +#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15) #define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10) #define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8) -#define ECC_COR_INFO__MAX_ERRORS 0x007f -#define ECC_COR_INFO__UNCOR_ERR 0x0080 +#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0) +#define ECC_COR_INFO__UNCOR_ERR BIT(7) + +#define CFG_DATA_BLOCK_SIZE 0x6b0 + +#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0 + +#define CFG_NUM_DATA_BLOCKS 0x6d0 + +#define CFG_META_DATA_SIZE 0x6e0 #define DMA_ENABLE 0x700 -#define DMA_ENABLE__FLAG 0x0001 +#define DMA_ENABLE__FLAG BIT(0) #define IGNORE_ECC_DONE 0x710 -#define IGNORE_ECC_DONE__FLAG 0x0001 +#define IGNORE_ECC_DONE__FLAG BIT(0) #define DMA_INTR 0x720 #define DMA_INTR_EN 0x730 -#define DMA_INTR__TARGET_ERROR 0x0001 -#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002 -#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004 -#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008 -#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010 -#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020 +#define DMA_INTR__TARGET_ERROR BIT(0) +#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1) +#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2) +#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3) +#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4) +#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5) #define TARGET_ERR_ADDR_LO 0x740 -#define TARGET_ERR_ADDR_LO__VALUE 0xffff +#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0) #define TARGET_ERR_ADDR_HI 0x750 -#define TARGET_ERR_ADDR_HI__VALUE 0xffff +#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0) #define CHNL_ACTIVE 0x760 -#define CHNL_ACTIVE__CHANNEL0 0x0001 -#define CHNL_ACTIVE__CHANNEL1 0x0002 -#define CHNL_ACTIVE__CHANNEL2 0x0004 -#define CHNL_ACTIVE__CHANNEL3 0x0008 +#define CHNL_ACTIVE__CHANNEL0 BIT(0) +#define CHNL_ACTIVE__CHANNEL1 BIT(1) +#define CHNL_ACTIVE__CHANNEL2 BIT(2) +#define CHNL_ACTIVE__CHANNEL3 BIT(3) #define FAIL 1 /*failed flag*/ #define PASS 0 /*success flag*/ -#define CLK_X 5 -#define CLK_MULTI 4 - -#define ONFI_BLOOM_TIME 1 -#define MODE5_WORKAROUND 0 - - #define MODE_00 0x00000000 #define MODE_01 0x04000000 #define MODE_10 0x08000000 #define MODE_11 0x0C000000 -#define ECC_SECTOR_SIZE 512 - -struct nand_buf { - int head; - int tail; - uint8_t *buf; - dma_addr_t dma_buf; -}; - -#define INTEL_CE4100 1 -#define INTEL_MRST 2 -#define DT 3 - struct denali_nand_info { struct nand_chip nand; + unsigned long clk_x_rate; /* bus interface clock rate */ int flash_bank; /* currently selected chip */ - int status; - int platform; - struct nand_buf buf; struct device *dev; - int total_used_banks; - int page; void __iomem *flash_reg; /* Register Interface */ void __iomem *flash_mem; /* Host Data/Command Interface */ /* elements used by ISR */ struct completion complete; spinlock_t irq_lock; + uint32_t irq_mask; uint32_t irq_status; int irq; + void *buf; + dma_addr_t dma_addr; + int dma_avail; int devnum; /* represent how many nands connected */ int bbtskipbytes; int max_banks; unsigned int revision; + unsigned long ecc_strength_avail; unsigned int caps; + const struct nand_ecc_setting *avail_ecc_settings; }; #define DENALI_CAP_HW_ECC_FIXUP BIT(0) diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index df9ef36..a6d2e58 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -29,13 +29,30 @@ struct denali_dt { struct clk *clk; }; +#define DENALI_MAX_ECC_SETTINGS 4 + struct denali_dt_data { unsigned int revision; unsigned int caps; + struct nand_ecc_setting avail_ecc_settings[DENALI_MAX_ECC_SETTINGS]; }; static const struct denali_dt_data denali_socfpga_data = { .caps = DENALI_CAP_HW_ECC_FIXUP, + .avail_ecc_settings = {{512, 8}, {512, 15}}, +}; + +static const struct denali_dt_data denali_uniphier_v5a_data = { + .caps = DENALI_CAP_HW_ECC_FIXUP | + DENALI_CAP_DMA_64BIT, + .avail_ecc_settings = {{1024, 8}, {1024, 16}, {1024, 24}}, +}; + +static const struct denali_dt_data denali_uniphier_v5b_data = { + .revision = 0x0501, + .caps = DENALI_CAP_HW_ECC_FIXUP | + DENALI_CAP_DMA_64BIT, + .avail_ecc_settings = {{1024, 8}, {1024, 16}}, }; static const struct of_device_id denali_nand_dt_ids[] = { @@ -43,6 +60,14 @@ static const struct of_device_id denali_nand_dt_ids[] = { .compatible = "altr,socfpga-denali-nand", .data = &denali_socfpga_data, }, + { + .compatible = "socionext,uniphier-denali-nand-v5a", + .data = &denali_uniphier_v5a_data, + }, + { + .compatible = "socionext,uniphier-denali-nand-v5b", + .data = &denali_uniphier_v5b_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, denali_nand_dt_ids); @@ -64,9 +89,9 @@ static int denali_dt_probe(struct platform_device *pdev) if (data) { denali->revision = data->revision; denali->caps = data->caps; + denali->avail_ecc_settings = data->avail_ecc_settings; } - denali->platform = DT; denali->dev = &pdev->dev; denali->irq = platform_get_irq(pdev, 0); if (denali->irq < 0) { @@ -93,6 +118,8 @@ static int denali_dt_probe(struct platform_device *pdev) } clk_prepare_enable(dt->clk); + denali->clk_x_rate = clk_get_rate(dt->clk); + ret = denali_init(denali); if (ret) goto out_disable_clk; diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index ac84323..e9c77d6 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -19,6 +19,9 @@ #define DENALI_NAND_NAME "denali-nand-pci" +#define INTEL_CE4100 1 +#define INTEL_MRST 2 + /* List of platforms this NAND controller has be integrated into */ static const struct pci_device_id denali_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 }, @@ -27,6 +30,10 @@ static const struct pci_device_id denali_pci_ids[] = { }; MODULE_DEVICE_TABLE(pci, denali_pci_ids); +static const struct nand_ecc_setting denali_pci_avail_ecc_settings[] = { + {512, 8}, {512, 15}, {/* sentinel */} +}; + static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { int ret; @@ -45,13 +52,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (id->driver_data == INTEL_CE4100) { - denali->platform = INTEL_CE4100; mem_base = pci_resource_start(dev, 0); mem_len = pci_resource_len(dev, 1); csr_base = pci_resource_start(dev, 1); csr_len = pci_resource_len(dev, 1); } else { - denali->platform = INTEL_MRST; csr_base = pci_resource_start(dev, 0); csr_len = pci_resource_len(dev, 0); mem_base = pci_resource_start(dev, 1); @@ -65,6 +70,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_master(dev); denali->dev = &dev->dev; denali->irq = dev->irq; + denali->clk_x_rate = 200000000; /* 200 MHz */ + denali->avail_ecc_settings = denali_pci_avail_ecc_settings; ret = pci_request_regions(dev, DENALI_NAND_NAME); if (ret) {