mbox series

[v3,0/6] mfd: twl: system-power-controller

Message ID 20231203222903.343711-1-andreas@kemnade.info
Headers show
Series mfd: twl: system-power-controller | expand

Message

Andreas Kemnade Dec. 3, 2023, 10:28 p.m. UTC 
Add system-power-controller property in the bindings and
the corresponding implementation and use it where
appropriate.
Not all cases are hit yet, there has probably to be a
separate series after going through with a brush.

Changes in v3:
- twl-core: 
   - remove repetitive verbose error messages
   - placed constants at top part of function
   - minor cleanups

Changes in v2:
- add A-By
- fix compiler warning

Andreas Kemnade (6):
  dt-bindings: mfd: ti,twl: Document system-power-controller
  twl-core: add power off implementation for twl603x
  ARM: dts: omap-embt2ws: system-power-controller for bt200
  ARM: dts: omap4-panda-common: Enable powering off the device
  mfd: twl4030-power: accept standard property for power controller
  ARM: dts: omap: gta04: standardize system-power-controller

 .../devicetree/bindings/mfd/ti,twl.yaml       |  2 ++
 arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi    |  2 +-
 .../boot/dts/ti/omap/omap4-epson-embt2ws.dts  |  1 +
 .../boot/dts/ti/omap/omap4-panda-common.dtsi  |  1 +
 drivers/mfd/twl-core.c                        | 28 +++++++++++++++++++
 drivers/mfd/twl4030-power.c                   |  3 ++
 include/linux/mfd/twl.h                       |  1 +
 7 files changed, 37 insertions(+), 1 deletion(-)