@@ -6,15 +6,6 @@
#include "motorola-cpcap-mapphone.dtsi"
/ {
- chosen {
- stdout-path = &uart3;
- };
-
- aliases {
- display0 = &lcd0;
- display1 = &hdmi0;
- };
-
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
* then 1023 - 1024 seems to contain mbm.
@@ -92,17 +83,6 @@ hsusb2_phy: usb-phy@2 {
#phy-cells = <0>;
};
- /* LCD regulator from sw5 source */
- lcd_regulator: regulator-lcd {
- compatible = "regulator-fixed";
- regulator-name = "lcd";
- regulator-min-microvolt = <5050000>;
- regulator-max-microvolt = <5050000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
- enable-active-high;
- vin-supply = <&sw5>;
- };
-
/* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
@@ -160,14 +140,6 @@ vibrator {
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
-
- backlight: backlight {
- compatible = "led-backlight";
-
- leds = <&backlight_led>;
- brightness-levels = <31 63 95 127 159 191 223 255>;
- default-brightness-level = <6>;
- };
};
&cpu_thermal {
@@ -197,57 +169,6 @@ &dss {
status = "okay";
};
-&dsi1 {
- status = "okay";
- vdd-supply = <&vcsi>;
-
- port {
- dsi1_out_ep: endpoint {
- remote-endpoint = <&lcd0_in>;
- lanes = <0 1 2 3 4 5>;
- };
- };
-
- lcd0: panel@0 {
- compatible = "motorola,droid4-panel", "panel-dsi-cm";
- reg = <0>;
- label = "lcd0";
- vddi-supply = <&lcd_regulator>;
- reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
-
- backlight = <&backlight>;
-
- width-mm = <50>;
- height-mm = <89>;
- rotation = <90>;
-
- panel-timing {
- clock-frequency = <0>; /* Calculated by dsi */
-
- hback-porch = <2>;
- hactive = <540>;
- hfront-porch = <0>;
- hsync-len = <2>;
-
- vback-porch = <1>;
- vactive = <960>;
- vfront-porch = <0>;
- vsync-len = <1>;
-
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- port {
- lcd0_in: endpoint {
- remote-endpoint = <&dsi1_out_ep>;
- };
- };
- };
-};
-
&hdmi {
status = "okay";
pinctrl-0 = <&dss_hdmi_pins>;
new file mode 100644
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "motorola,droid4-panel", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ backlight = <&backlight>;
+
+ width-mm = <50>;
+ height-mm = <89>;
+ rotation = <90>;
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
@@ -1,11 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
model = "Motorola Droid Bionic XT875";
compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
};
&keypad {
@@ -1,9 +1,21 @@
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
+ model = "Motorola Droid 4 XT894";
+ compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
gpio_keys {
compatible = "gpio-keys";
@@ -33,11 +45,6 @@ slider {
};
};
-/ {
- model = "Motorola Droid 4 XT894";
- compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
The LCD regulator and backlight are specific only to droid bionic xt875 and droid4 xt894. On droid razr xt910 and xt912, the LCD regulator and backlight are different. The LCD and backlight are also different on the the mz609 tablets. Let's add a common motorola-mapphone-xt8xx.dtsi to make it easy to add support for xt910 and xt912 and the mz609 to mz617 tablets. While at it, let's also move aliases to the board specific dts files where they belong. And let's move the omap4-droid4-xt894.dts compatible to the top. Signed-off-by: Tony Lindgren <tony@atomide.com> --- .../dts/ti/omap/motorola-mapphone-common.dtsi | 79 ------------------- .../dts/ti/omap/motorola-mapphone-xt8xx.dtsi | 75 ++++++++++++++++++ .../dts/ti/omap/omap4-droid-bionic-xt875.dts | 11 ++- .../boot/dts/ti/omap/omap4-droid4-xt894.dts | 19 +++-- 4 files changed, 98 insertions(+), 86 deletions(-) create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi