mbox series

[v5,0/7] Support for GPU ACD feature on Adreno X1-85

Message ID 20250419-gpu-acd-v5-0-8dbab23569e0@quicinc.com
Headers show
Series Support for GPU ACD feature on Adreno X1-85 | expand

Message

Akhil P Oommen April 19, 2025, 2:51 p.m. UTC 
This series adds support for ACD feature for Adreno GPU which helps to
lower the power consumption on GX rail and also sometimes is a requirement
to enable higher GPU frequencies. At high level, following are the
sequences required for ACD feature:
	1. Identify the ACD level data for each regulator corner
	2. Send a message to AOSS to switch voltage plan
	3. Send a table with ACD level information to GMU during every
	gpu wake up

For (1), it is better to keep ACD level data in devicetree because this
value depends on the process node, voltage margins etc which are
chipset specific. For instance, same GPU HW IP on a different chipset
would have a different set of values. So, a new schema which extends
opp-v2 is created to add a new property called "qcom,opp-acd-level".

ACD support is dynamically detected based on the presence of
"qcom,opp-acd-level" property in GPU's opp table. Also, qmp node should be
present under GMU node in devicetree for communication with AOSS.

The devicetree patch in this series adds the acd-level data for X1-85
GPU present in Snapdragon X1 Elite chipset.

The last two devicetree patches are for Bjorn and all the rest for
Rob Clark.

---
Changes in v5:
- Rebased on top of 6.15-rc2
- Move 'acd data fix' mentioned in the prev revision to the correct patch
- Make module-param sysfs node read-only (Konrad)
- Apply opp-v2-qcom-adreno schema only on adreno opp table
- Link to v4: https://lore.kernel.org/r/20250109-gpu-acd-v4-0-08a5efaf4a23@quicinc.com

Changes in v4:
- Send correct acd data via hfi (Neil)
- Fix dt-bindings error
- Fix IB vote for the 1.1Ghz OPP
- New patch#2 to fix the HFI timeout error seen when ACD is enabled
- Link to v3: https://lore.kernel.org/r/20241231-gpu-acd-v3-0-3ba73660e9ca@quicinc.com

Changes in v3:
- Rebased on top of v6.13-rc4 since X1E doesn't boot properly with msm-next
- Update patternProperties regex (Krzysztof)
- Update MAINTAINERS file include the new opp-v2-qcom-adreno.yaml
- Update the new dt properties' description
- Do not move qmp_get() to acd probe (Konrad)
- New patches: patch#2, #3 and #6
- Link to v2: https://lore.kernel.org/r/20241021-gpu-acd-v2-0-9c25a62803bc@quicinc.com

Changes in v2:
- Removed RFC tag for the series
- Improve documentation for the new dt bindings (Krzysztof)
- Add fallback compatible string for opp-table (Krzysztof)
- Link to v1: https://lore.kernel.org/r/20241012-gpu-acd-v1-0-1e5e91aa95b6@quicinc.com

---
Akhil P Oommen (7):
      drm/msm/adreno: Add support for ACD
      drm/msm/a6xx: Increase HFI response timeout
      drm/msm: a6x: Rework qmp_get() error handling
      drm/msm/adreno: Add module param to disable ACD
      dt-bindings: opp: Add v2-qcom-adreno vendor bindings
      arm64: dts: qcom: x1e80100: Add ACD levels for GPU
      arm64: dts: qcom: x1e80100: Add OPPs up to Turbo L3 for GPU

 .../bindings/opp/opp-v2-qcom-adreno.yaml           | 96 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 arch/arm64/boot/dts/qcom/x1e80100.dtsi             | 27 +++++-
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              | 96 +++++++++++++++++++---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.h              |  1 +
 drivers/gpu/drm/msm/adreno/a6xx_hfi.c              | 38 ++++++++-
 drivers/gpu/drm/msm/adreno/a6xx_hfi.h              | 21 +++++
 drivers/gpu/drm/msm/adreno/adreno_device.c         |  4 +
 8 files changed, 269 insertions(+), 15 deletions(-)
---
base-commit: 8a834b0ac9ceb354a6e0b8cf5b363edca8221bdd
change-id: 20240724-gpu-acd-6c1dc5dcf516

Best regards,