mbox series

[00/11] power: supply: pmi8998 charger improvements and smb5 support

Message ID 20250619-smb2-smb5-support-v1-0-ac5dec51b6e1@linaro.org
Headers show
Series power: supply: pmi8998 charger improvements and smb5 support | expand

Message

Casey Connolly June 19, 2025, 2:55 p.m. UTC 
This series contains fixes and cleanups for the pmi8998 charger driver,
as well as introducing support for the newer smb5 charger found in the
pm8150b and other newer Qualcomm PMICs..

A bug is fixed where wakeirq enable/disable refcounting wasn't respected
when the driver was unloaded and reloaded.

Support is added for disabling charging entirely by writing a 0 to the
"status" register (as described in the psy documentation). This allows
for userspace programs to manage charging, e.g. to stop at 80% capacity.

The AICL re-run interval is programmed to a consistent value (3
seconds).

The battery property charge-term-current-microamp is now respected, this
is used to program the constant charge current limit during the fast
charging phase. This also makes it safer to increase the max current
limit this driver originally imposed from 1A to ~2A. According to the
PMIC docs this is easy to handle without a secondary charger chip (which
most but not all phones have).

Further increasing the charge current limit would require tighter
integration with thermal zones and a mechanism to limit the current
when the device gets too warm (e.g. by modelling the power supply as
a cooling device). This infrastructure is currently missing from the
kernel.

---
Casey Connolly (11):
      dt-bindings: power: supply: qcom,pmi89980-charger: add pm8150b and 7250b
      arm64: dts: qcom: sdm845-oneplus-*: set constant-charge-current-max-microamp
      power: supply: qcom_pmi8998_charger: fix wakeirq
      power: supply: pmi8998_charger: rename to qcom_smbx
      power: supply: qcom_smbx: allow disabling charging
      power: supply: qcom_smbx: respect battery charge-term-current-microamp
      power: supply: qcom_smbx: bump up the max current
      power: supply: qcom_smbx: remove unused registers
      power: supply: qcom_smbx: add smb5 support
      MAINTAINERS: add myself as smbx charger driver maintainer
      power: supply: qcom_smbx: program aicl rerun time

 .../power/supply/qcom,pmi8998-charger.yaml         |   2 +
 MAINTAINERS                                        |   7 +
 .../boot/dts/qcom/sdm845-oneplus-enchilada.dts     |   8 +
 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts |   8 +
 drivers/power/supply/Makefile                      |   2 +-
 .../supply/{qcom_pmi8998_charger.c => qcom_smbx.c} | 730 ++++++++++++---------
 6 files changed, 430 insertions(+), 327 deletions(-)
---
base-commit: bc6e0ba6c9bafa6241b05524b9829808056ac4ad
change-id: 20250518-smb2-smb5-support-01685eca6fbb

Casey Connolly <casey.connolly@linaro.org>