From patchwork Wed Sep 14 06:11:04 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Meng, Li \(Jassmine\)" X-Patchwork-Id: 606055 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0FE25C6FA89 for ; Wed, 14 Sep 2022 06:12:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229637AbiINGMH (ORCPT ); Wed, 14 Sep 2022 02:12:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54262 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230016AbiINGL5 (ORCPT ); Wed, 14 Sep 2022 02:11:57 -0400 Received: from NAM04-MW2-obe.outbound.protection.outlook.com (mail-mw2nam04on2071.outbound.protection.outlook.com [40.107.101.71]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B86BB6F25D; Tue, 13 Sep 2022 23:11:47 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=mP3wpg7/PZdAt8pWYZcAxhDe9TeWunqnBXJ3SVax1XWGz3m2+RXp4vmUMfSyc7Y/+nR+FdN0sLHlmMoQR4+jlDyG5qOasLYqv7I3Wtzf7OjqL4OjmyVYxntMffl0QMyXvZvhn0rN5Bmd2E0iAojlptaPprfRBSjGijBAdTV7oK1t7+VDz4x/nzv0WK/7vhL08c+s8X44rauV/YU6bnlGvZCu2diqZOS6VtyYk3lPz5qha16Xp8zy/MNjAOaq7tqsouxP8vBd2O9+IQsbbcgtxy4jIBu/cSxIpbsfq1bVb+Tfffro76wAA+AjHH5gNJ6m4J8jC9YbIfbUuZnhxbpmOQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=nEDdGgoMSlWyStPq3tPyTshtx1QLfhp9CSBurFGzEMc=; b=HHAaNVSFt0x7QtMrAxPzWWgtLJoik15nKLQHCTxIXeJyBN3wpSv7Kr4ptGSAjwVvjMXrdbufFmjc2fnmOEzhDjL+VkXkWWbAgiKYFZ9V/GgYowpHAxitLY33HE4dA7v4c206Z04oJpUe9oIDvS/Dn4Sejv8N3kxbIqbJZgviifrVQLG+EapUd9I9YLVXSnzQ+eMCnoMOl03QQeHGOtsO2RlmLe+e44GOInJajGqbCb2HCBtXEljzBkUlR1ikvz4Fham0WuMGjLmNlPdFpNr8aqN34ZVvAGOlU1OOlkYTzUCLTn2sZhUeiDogoGc9ozrKlthSjEVivRdOHN2YGM7h7A== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=linuxfoundation.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=nEDdGgoMSlWyStPq3tPyTshtx1QLfhp9CSBurFGzEMc=; b=J99214yW9bySXTCUZmPiUTVfZ7+xe4f8QBWQqk5E2M9kimVqlcYzCB0yS0h9OBIN/61oFb64TqkDPyHAZJ7MgYzmu7zHO3VeFdxreqkmOaRhKFucfVnYmI8mEzhSLh6Ipf05DZgla9+jC1IyMzUixQXq+r2SdLcOH2+vfstiOwc= Received: from DM6PR04CA0004.namprd04.prod.outlook.com (2603:10b6:5:334::9) by SJ1PR12MB6363.namprd12.prod.outlook.com (2603:10b6:a03:453::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5612.22; Wed, 14 Sep 2022 06:11:45 +0000 Received: from DS1PEPF0000B075.namprd05.prod.outlook.com (2603:10b6:5:334:cafe::21) by DM6PR04CA0004.outlook.office365.com (2603:10b6:5:334::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5632.12 via Frontend Transport; Wed, 14 Sep 2022 06:11:45 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by DS1PEPF0000B075.mail.protection.outlook.com (10.167.17.6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.5612.12 via Frontend Transport; Wed, 14 Sep 2022 06:11:44 +0000 Received: from jasmine-meng.amd.com (10.180.168.240) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.28; Wed, 14 Sep 2022 01:11:40 -0500 From: Meng Li To: Shuah Khan , Huang Rui , CC: "Rafael J . Wysocki" , Nathan Fontenot , Deepak Sharma , "Alex Deucher" , Mario Limonciello , Jinzhou Su , Perry Yuan , Xiaojian Du , Viresh Kumar , Borislav Petkov , , Meng Li Subject: [PATCH V3 3/4] selftests: amd-pstate: Trigger gitsource benchmark and test cpus Date: Wed, 14 Sep 2022 14:11:04 +0800 Message-ID: <20220914061105.1982477-4-li.meng@amd.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220914061105.1982477-1-li.meng@amd.com> References: <20220914061105.1982477-1-li.meng@amd.com> MIME-Version: 1.0 X-Originating-IP: [10.180.168.240] X-ClientProxiedBy: SATLEXMB03.amd.com (10.181.40.144) To SATLEXMB04.amd.com (10.181.40.145) X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: DS1PEPF0000B075:EE_|SJ1PR12MB6363:EE_ X-MS-Office365-Filtering-Correlation-Id: 3d90faf1-b43f-4689-a429-08da96180002 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17; CTRY:US; LANG:en; SCL:1; SRV:; IPV:CAL; SFV:NSPM; H:SATLEXMB04.amd.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230022)(4636009)(136003)(346002)(376002)(39860400002)(396003)(451199015)(40470700004)(36840700001)(46966006)(2616005)(8936002)(81166007)(86362001)(83380400001)(5660300002)(2906002)(40460700003)(8676002)(70586007)(356005)(54906003)(82740400003)(70206006)(26005)(110136005)(7696005)(6666004)(186003)(40480700001)(426003)(30864003)(1076003)(16526019)(82310400005)(336012)(36756003)(41300700001)(478600001)(47076005)(36860700001)(4326008)(316002)(36900700001); DIR:OUT; SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 14 Sep 2022 06:11:44.8807 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 3d90faf1-b43f-4689-a429-08da96180002 X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d; Ip=[165.204.84.17]; Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: DS1PEPF0000B075.namprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SJ1PR12MB6363 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add gitsource.sh trigger the gitsource testing and monitor the cpu desire performance, frequency, load, power consumption and throughput etc. Signed-off-by: Meng Li --- tools/testing/selftests/amd-pstate/Makefile | 2 +- .../testing/selftests/amd-pstate/gitsource.sh | 345 ++++++++++++++++++ tools/testing/selftests/amd-pstate/run.sh | 32 +- 3 files changed, 372 insertions(+), 7 deletions(-) create mode 100755 tools/testing/selftests/amd-pstate/gitsource.sh diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile index cac8dedb7226..5f195ee756d6 100644 --- a/tools/testing/selftests/amd-pstate/Makefile +++ b/tools/testing/selftests/amd-pstate/Makefile @@ -13,6 +13,6 @@ TEST_GEN_FILES += ../../../power/x86/intel_pstate_tracer/intel_pstate_tracer.py endif TEST_PROGS := run.sh -TEST_FILES := basic.sh tbench.sh +TEST_FILES := basic.sh tbench.sh gitsource.sh include ../lib.mk diff --git a/tools/testing/selftests/amd-pstate/gitsource.sh b/tools/testing/selftests/amd-pstate/gitsource.sh new file mode 100755 index 000000000000..a9ad9388eb7b --- /dev/null +++ b/tools/testing/selftests/amd-pstate/gitsource.sh @@ -0,0 +1,345 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +# Testing and monitor the cpu frequency and performance when +# this script trigger gitsource test. + +# protect against multiple inclusion +if [ $FILE_GITSOURCE ]; then + return 0 +else + FILE_GITSOURCE=DONE +fi + +git_name="git-2.15.1" +git_tar="$git_name.tar.gz" +gitsource_url="https://github.com/git/git/archive/refs/tags/v2.15.1.tar.gz" +gitsource_governors=("ondemand" "schedutil") + +# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: time $7: energy, $8: PPW +store_csv_gitsource() +{ + echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_GIT.csv > /dev/null 2>&1 +} + +# clear some special lines +clear_csv_gitsource() +{ + if [ -f $OUTFILE_GIT.csv ]; then + sed -i '/Comprison(%)/d' $OUTFILE_GIT.csv + sed -i "/$(scaling_name)/d" $OUTFILE_GIT.csv + fi +} + +# find string $1 in file csv and get the number of lines +get_lines_csv_gitsource() +{ + if [ -f $OUTFILE_GIT.csv ]; then + return `grep -c "$1" $OUTFILE_GIT.csv` + else + return 0 + fi +} + +pre_clear_gitsource() +{ + post_clear_gitsource + rm -rf gitsource_*.png + clear_csv_gitsource +} + +post_clear_gitsource() +{ + rm -rf results/tracer-gitsource* + rm -rf $OUTFILE_GIT*.log + rm -rf $OUTFILE_GIT*.result +} + +install_gitsource() +{ + if [ ! -d $git_name ]; then + printf "Download gitsource, please wait a moment ...\n\n" + wget -O $git_tar $gitsource_url > /dev/null 2>&1 + + printf "Tar gitsource ...\n\n" + tar -xzf $git_tar + fi +} + +# $1: governor, $2: loop +run_gitsource() +{ + echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL" + ./amd_pstate_trace.py -n tracer-gitsource-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 & + + printf "Make and test gitsource for $1 #$2 make_cpus: $MAKE_CPUS\n" + cd $git_name + perf stat -a --per-socket -I 1000 -e power/energy-pkg/ /usr/bin/time -o ../$OUTFILE_GIT.time-gitsource-$1-$2.log make test -j$MAKE_CPUS > ../$OUTFILE_GIT-perf-$1-$2.log 2>&1 + cd .. + + for job in `jobs -p` + do + echo "Waiting for job id $job" + wait $job + done +} + +# $1: governor, $2: loop +parse_gitsource() +{ + awk '{print $5}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-des-perf-$1-$2.log + avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-des-perf-$1-$2.log) + printf "Gitsource-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result + + awk '{print $7}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-freq-$1-$2.log + avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-freq-$1-$2.log) + printf "Gitsource-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result + + awk '{print $11}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-load-$1-$2.log + avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-load-$1-$2.log) + printf "Gitsource-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result + + grep user $OUTFILE_GIT.time-gitsource-$1-$2.log | awk '{print $1}' | sed -e 's/user//' > $OUTFILE_GIT-time-$1-$2.log + time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1-$2.log) + printf "Gitsource-$1-#$2 user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result + + grep Joules $OUTFILE_GIT-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_GIT-energy-$1-$2.log + en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1-$2.log) + printf "Gitsource-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result + + # Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t + # senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J), + # and t is time measured in seconds(s). This means that performance per watt becomes + # 1/t 1/t 1 + # ----- = ----- = --- + # P E/t E + # with unit given by 1 per joule. + ppw=`echo "scale=9;1/$en_sum" | bc | awk '{printf "%.9f", $0}'` + printf "Gitsource-$1-#$2 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + driver_name=`echo $(scaling_name)` + store_csv_gitsource "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $time_sum $en_sum $ppw +} + +# $1: governor +loop_gitsource() +{ + printf "\nGitsource total test times is $LOOP_TIMES for $1\n\n" + for i in `seq 1 $LOOP_TIMES` + do + run_gitsource $1 $i + parse_gitsource $1 $i + done +} + +# $1: governor +gather_gitsource() +{ + printf "Gitsource test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_GIT.result + printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_GIT-des-perf-$1.log + avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-des-perf-$1.log) + printf "Gitsource-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_GIT-freq-$1.log + avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-freq-$1.log) + printf "Gitsource-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_GIT-load-$1.log + avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-load-$1.log) + printf "Gitsource-$1 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "user time(s):" | awk '{print $NF}' > $OUTFILE_GIT-time-$1.log + time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1.log) + printf "Gitsource-$1 total user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result + + avg_time=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-time-$1.log) + printf "Gitsource-$1 avg user times(s): $avg_time\n" | tee -a $OUTFILE_GIT.result + + grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_GIT-energy-$1.log + en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1.log) + printf "Gitsource-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result + + avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-energy-$1.log) + printf "Gitsource-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_GIT.result + + # Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t + # senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J), + # and t is time measured in seconds(s). This means that performance per watt becomes + # 1/t 1/t 1 + # ----- = ----- = --- + # P E/t E + # with unit given by 1 per joule. + ppw=`echo "scale=9;1/$avg_en" | bc | awk '{printf "%.9f", $0}'` + printf "Gitsource-$1 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + driver_name=`echo $(scaling_name)` + store_csv_gitsource "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_time $avg_en $ppw +} + +# $1: base scaling_driver $2: base governor $3: comparison scaling_driver $4: comparison governor +__calc_comp_gitsource() +{ + base=`grep "$1-$2" $OUTFILE_GIT.csv | grep "Average"` + comp=`grep "$3-$4" $OUTFILE_GIT.csv | grep "Average"` + + if [ -n "$base" -a -n "$comp" ]; then + printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result + printf "Gitsource comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_GIT.result + printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result + + # get the base values + des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//` + freq_base=`echo "$base" | awk '{print $4}' | sed s/,//` + load_base=`echo "$base" | awk '{print $5}' | sed s/,//` + time_base=`echo "$base" | awk '{print $6}' | sed s/,//` + energy_base=`echo "$base" | awk '{print $7}' | sed s/,//` + ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//` + + # get the comparison values + des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//` + freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//` + load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//` + time_comp=`echo "$comp" | awk '{print $6}' | sed s/,//` + energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//` + ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//` + + # compare the base and comp values + des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_GIT.result + + freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_GIT.result + + load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_GIT.result + + time_drop=`echo "scale=4;($time_comp-$time_base)*100/$time_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 perf base: $time_base comprison: $time_comp percent: $time_drop\n" | tee -a $OUTFILE_GIT.result + + energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_GIT.result + + ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'` + printf "Gitsource-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_GIT.result + printf "\n" | tee -a $OUTFILE_GIT.result + + store_csv_gitsource "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$time_drop" "$energy_drop" "$ppw_drop" + fi +} + +# calculate the comparison(%) +calc_comp_gitsource() +{ + # acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[0]} ${gitsource_governors[1]} + + # amd-pstate-ondemand VS amd-pstate-schedutil + __calc_comp_gitsource ${all_scaling_names[1]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[1]} + + # acpi-cpufreq-ondemand VS amd-pstate-ondemand + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[0]} + + # acpi-cpufreq-schedutil VS amd-pstate-schedutil + __calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[1]} ${all_scaling_names[1]} ${gitsource_governors[1]} +} + +# $1: file_name, $2: title, $3: ylable, $4: column +plot_png_gitsource() +{ + # all_scaling_names[1] all_scaling_names[0] flag + # amd-pstate acpi-cpufreq + # N N 0 + # N Y 1 + # Y N 2 + # Y Y 3 + ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + flag=0 + else + flag=1 + fi + else + ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv` + if [ $ret -eq 0 ]; then + flag=2 + else + flag=3 + fi + fi + + gnuplot << EOF + set term png + set output "$1" + + set title "$2" + set xlabel "Test Cycles (round)" + set ylabel "$3" + + set grid + set style data histogram + set style fill solid 0.5 border + set boxwidth 0.8 + + if ($flag == 1) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}" + } else { + if ($flag == 2) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}" + } else { + if ($flag == 3 ) { + plot \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \ + "<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}" + } + } + } + quit +EOF +} + +amd_pstate_gitsource() +{ + printf "\n---------------------------------------------\n" + printf "*** Running gitsource ***" + printf "\n---------------------------------------------\n" + + pre_clear_gitsource + + install_gitsource + + get_lines_csv_gitsource "Governor" + if [ $? -eq 0 ]; then + # add titles and unit for csv file + store_csv_gitsource "Governor" "Round" "Des-perf" "Freq" "Load" "Time" "Energy" "Performance Per Watt" + store_csv_gitsource "Unit" "" "" "GHz" "" "s" "J" "1/J" + fi + + backup_governor + for governor in ${gitsource_governors[*]} ; do + printf "\nSpecified governor is $governor\n\n" + switch_governor $governor + loop_gitsource $governor + gather_gitsource $governor + done + restore_governor + + plot_png_gitsource "gitsouce_time.png" "Gitsource Benchmark Time" "Time (s)" 6 + plot_png_gitsource "gitsource_energy.png" "Gitsource Benchmark Energy" "Energy (J)" 7 + plot_png_gitsource "gitsource_ppw.png" "Gitsource Benchmark Performance Per Watt" "Performance Per Watt (1/J)" 8 + + calc_comp_gitsource + + post_clear_gitsource +} diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh index dea61e4443fc..9ef6eff347d3 100755 --- a/tools/testing/selftests/amd-pstate/run.sh +++ b/tools/testing/selftests/amd-pstate/run.sh @@ -10,6 +10,7 @@ fi source basic.sh source tbench.sh +source gitsource.sh # amd-pstate-ut only run on x86/x86_64 AMD systems. ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/') @@ -18,6 +19,7 @@ VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}') FUNC=all OUTFILE=selftest OUTFILE_TBENCH="$OUTFILE.tbench" +OUTFILE_GIT="$OUTFILE.gitsource" SYSFS= CPUROOT= @@ -130,6 +132,9 @@ amd_pstate_all() # tbench amd_pstate_tbench + + # gitsource + amd_pstate_gitsource } helpme() @@ -139,7 +144,8 @@ helpme() [-o ] [-c ] + tbench: Tbench testing, + gitsource: Gitsource testing.>] [-t ] [-p ] [-l ] @@ -158,7 +164,7 @@ parse_arguments() helpme ;; - c) # --func_type (Function to perform: basic, tbench (default: all)) + c) # --func_type (Function to perform: basic, tbench, gitsource (default: all)) FUNC=$OPTARG ;; @@ -174,7 +180,7 @@ parse_arguments() PROCESS_NUM=$OPTARG ;; - l) # --tbench-loop-times + l) # --tbench/gitsource-loop-times LOOP_TIMES=$OPTARG ;; @@ -242,16 +248,16 @@ prerequisite() fi else case "$FUNC" in - "tbench") + "tbench" | "gitsource") if [ "$scaling_driver" != "$COMPARATIVE_TEST" ]; then - echo "$0 # Skipped: Comparison test can only run on $COMPARATIVE_TEST driver." + echo "$0 # Skipped: Comparison test can only run on $COMPARISON_TEST driver." echo "$0 # Current cpufreq scaling drvier is $scaling_driver." exit $ksft_skip fi ;; *) - echo "$0 # Skipped: Comparison test are only for tbench." + echo "$0 # Skipped: Comparison test are only for tbench or gitsource." echo "$0 # Current comparative test is for $FUNC." exit $ksft_skip ;; @@ -274,6 +280,10 @@ prerequisite() command_perf command_tbench ;; + + "gitsource") + command_perf + ;; esac SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` @@ -321,6 +331,10 @@ do_test() amd_pstate_tbench ;; + "gitsource") + amd_pstate_gitsource + ;; + *) echo "Invalid [-f] function type" helpme @@ -344,6 +358,12 @@ pre_clear_dumps() rm -rf tbench_*.png ;; + "gitsource") + rm -rf $OUTFILE.log + rm -rf $OUTFILE.backup_governor.log + rm -rf gitsource_*.png + ;; + *) ;; esac