diff mbox series

[v7,04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header

Message ID 20230526-topic-smd_icc-v7-4-09c78c175546@linaro.org
State Accepted
Commit e1e1267413d2e9fbe3a34c5a5f701b0f5fb0bf2c
Headers show
Series Restructure RPM SMD ICC | expand

Commit Message

Konrad Dybcio June 19, 2023, 1:04 p.m. UTC 
In preparation for handling the bus clocks in the icc driver, carve out
some defines and a struct definition to the common rpm header.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c   | 13 -------------
 include/linux/soc/qcom/smd-rpm.h | 15 +++++++++++++++
 2 files changed, 15 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index e4de74b68797..937cb1515968 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -18,13 +18,6 @@ 
 
 #include <dt-bindings/clock/qcom,rpmcc.h>
 
-#define QCOM_RPM_KEY_SOFTWARE_ENABLE			0x6e657773
-#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY	0x62636370
-#define QCOM_RPM_SMD_KEY_RATE				0x007a484b
-#define QCOM_RPM_SMD_KEY_ENABLE				0x62616e45
-#define QCOM_RPM_SMD_KEY_STATE				0x54415453
-#define QCOM_RPM_SCALING_ENABLE_ID			0x2
-
 #define __DEFINE_CLK_SMD_RPM_PREFIX(_prefix, _name, _active,		      \
 				    type, r_id, key)			      \
 	static struct clk_smd_rpm clk_smd_rpm_##_prefix##_active;	      \
@@ -171,12 +164,6 @@  struct clk_smd_rpm {
 	unsigned long rate;
 };
 
-struct clk_smd_rpm_req {
-	__le32 key;
-	__le32 nbytes;
-	__le32 value;
-};
-
 struct rpm_smd_clk_desc {
 	struct clk_smd_rpm **clks;
 	size_t num_clks;
diff --git a/include/linux/soc/qcom/smd-rpm.h b/include/linux/soc/qcom/smd-rpm.h
index 99499e4b080e..8190878645f9 100644
--- a/include/linux/soc/qcom/smd-rpm.h
+++ b/include/linux/soc/qcom/smd-rpm.h
@@ -2,6 +2,8 @@ 
 #ifndef __QCOM_SMD_RPM_H__
 #define __QCOM_SMD_RPM_H__
 
+#include <linux/types.h>
+
 struct qcom_smd_rpm;
 
 #define QCOM_SMD_RPM_ACTIVE_STATE	0
@@ -45,6 +47,19 @@  struct qcom_smd_rpm;
 #define QCOM_SMD_RPM_PKA_CLK	0x616b70
 #define QCOM_SMD_RPM_MCFG_CLK	0x6766636d
 
+#define QCOM_RPM_KEY_SOFTWARE_ENABLE			0x6e657773
+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY	0x62636370
+#define QCOM_RPM_SMD_KEY_RATE				0x007a484b
+#define QCOM_RPM_SMD_KEY_ENABLE				0x62616e45
+#define QCOM_RPM_SMD_KEY_STATE				0x54415453
+#define QCOM_RPM_SCALING_ENABLE_ID			0x2
+
+struct clk_smd_rpm_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
 int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
 		       int state,
 		       u32 resource_type, u32 resource_id,