diff mbox series

[v3,03/10] interconnect: qcom: icc-rpm: Let nodes drive their own bus clock

Message ID 20230726-topic-icc_coeff-v3-3-dee684d6cdd2@linaro.org
State Superseded
Headers show
Series Fix up icc clock rate calculation on some platforms | expand

Commit Message

Konrad Dybcio Aug. 8, 2023, 11:43 a.m. UTC
If this hardware couldn't get messier, some nodes are supposed to drive
their own bus clock.. Presumably to connect to some intermediate
interface between the node itself and the bus it's (supposed to be)
connected to.

Expand the node struct with the necessary data and hook up the
allocations & calculations.

Note that the node-specific AB/IB coefficients contribute (by design)
to both the node-level and the bus-level aggregation.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 27 +++++++++++++++++++++++++++
 drivers/interconnect/qcom/icc-rpm.h |  3 +++
 2 files changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 8c1bfd65d774..1d3af4e9ead8 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -414,6 +414,33 @@  static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 		qp->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate;
 	}
 
+	/* Handle the node-specific clock */
+	if (!src_qn->bus_clk_desc)
+		return 0;
+
+	active_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_ACTIVE_STATE);
+	sleep_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_SLEEP_STATE);
+
+	if (active_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE]) {
+		ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_ACTIVE_STATE,
+						active_rate);
+		if (ret)
+			return ret;
+
+		/* Cache the rate after we've successfully committed it to RPM */
+		src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE] = active_rate;
+	}
+
+	if (sleep_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE]) {
+		ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_SLEEP_STATE,
+						sleep_rate);
+		if (ret)
+			return ret;
+
+		/* Cache the rate after we've successfully committed it to RPM */
+		src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index 5e7d6a4fd2f3..f9ef16f570be 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -97,6 +97,7 @@  struct qcom_icc_qos {
  * @num_links: the total number of @links
  * @channels: number of channels at this node (e.g. DDR channels)
  * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @bus_clk_desc: a pointer to a rpm_clk_resource description of bus clocks
  * @sum_avg: current sum aggregate value of all avg bw requests
  * @max_peak: current max aggregate value of all peak bw requests
  * @mas_rpm_id:	RPM id for devices that are bus masters
@@ -110,11 +111,13 @@  struct qcom_icc_node {
 	u16 num_links;
 	u16 channels;
 	u16 buswidth;
+	const struct rpm_clk_resource *bus_clk_desc;
 	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
 	u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
 	int mas_rpm_id;
 	int slv_rpm_id;
 	struct qcom_icc_qos qos;
+	u32 bus_clk_rate[QCOM_SMD_RPM_STATE_NUM];
 };
 
 struct qcom_icc_desc {