From patchwork Thu Nov 23 12:08:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sudeep Holla X-Patchwork-Id: 746724 Authentication-Results: smtp.subspace.kernel.org; dkim=none Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 9CEC6B0 for ; Thu, 23 Nov 2023 04:08:51 -0800 (PST) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id C70F91042; Thu, 23 Nov 2023 04:09:37 -0800 (PST) Received: from usa.arm.com (e103737-lin.cambridge.arm.com [10.1.197.49]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPA id 93FF53F7A6; Thu, 23 Nov 2023 04:08:50 -0800 (PST) From: Sudeep Holla To: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Sudeep Holla , Ulf Hansson , Cristian Marussi Subject: [PATCH 1/2] pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem Date: Thu, 23 Nov 2023 12:08:46 +0000 Message-ID: <20231123120847.2825444-1-sudeep.holla@arm.com> X-Mailer: git-send-email 2.42.0 Precedence: bulk X-Mailing-List: linux-pm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The Kconfig options belongs closer to the corresponding implementations, hence let's move them from the firmware to the pmdomain subsystem. Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/Kconfig | 25 ------------------------- drivers/pmdomain/Kconfig | 1 + drivers/pmdomain/arm/Kconfig | 25 +++++++++++++++++++++++++ 3 files changed, 26 insertions(+), 25 deletions(-) create mode 100644 drivers/pmdomain/arm/Kconfig -- 2.42.0 diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig index 706d1264d038..aa5842be19b2 100644 --- a/drivers/firmware/arm_scmi/Kconfig +++ b/drivers/firmware/arm_scmi/Kconfig @@ -168,31 +168,6 @@ config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE endif #ARM_SCMI_PROTOCOL -config ARM_SCMI_POWER_DOMAIN - tristate "SCMI power domain driver" - depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) - default y - select PM_GENERIC_DOMAINS if PM - help - This enables support for the SCMI power domains which can be - enabled or disabled via the SCP firmware - - This driver can also be built as a module. If so, the module - will be called scmi_pm_domain. Note this may needed early in boot - before rootfs may be available. - -config ARM_SCMI_PERF_DOMAIN - tristate "SCMI performance domain driver" - depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) - default y - select PM_GENERIC_DOMAINS if PM - help - This enables support for the SCMI performance domains which can be - enabled or disabled via the SCP firmware. - - This driver can also be built as a module. If so, the module will be - called scmi_perf_domain. - config ARM_SCMI_POWER_CONTROL tristate "SCMI system power control driver" depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index c98c5bf75a14..23c64851a5b0 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -4,6 +4,7 @@ menu "PM Domains" source "drivers/pmdomain/actions/Kconfig" source "drivers/pmdomain/amlogic/Kconfig" source "drivers/pmdomain/apple/Kconfig" +source "drivers/pmdomain/arm/Kconfig" source "drivers/pmdomain/bcm/Kconfig" source "drivers/pmdomain/imx/Kconfig" source "drivers/pmdomain/mediatek/Kconfig" diff --git a/drivers/pmdomain/arm/Kconfig b/drivers/pmdomain/arm/Kconfig new file mode 100644 index 000000000000..acbe4331aaf7 --- /dev/null +++ b/drivers/pmdomain/arm/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +config ARM_SCMI_PERF_DOMAIN + tristate "SCMI performance domain driver" + depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) + default y + select PM_GENERIC_DOMAINS if PM + help + This enables support for the SCMI performance domains which can be + enabled or disabled via the SCP firmware. + + This driver can also be built as a module. If so, the module will be + called scmi_perf_domain. + +config ARM_SCMI_POWER_DOMAIN + tristate "SCMI power domain driver" + depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) + default y + select PM_GENERIC_DOMAINS if PM + help + This enables support for the SCMI power domains which can be + enabled or disabled via the SCP firmware + + This driver can also be built as a module. If so, the module + will be called scmi_pm_domain. Note this may needed early in boot + before rootfs may be available.