[2/2] power/supply: Add support for ltc4162-f/s and ltc4015

diff --git a/drivers/power/supply/ltc4162-l-charger.c b/drivers/power/supply/ltc4162-l-charger.c
index 2e4bc74e1..9c9ea7c5b 100644
--- a/drivers/power/supply/ltc4162-l-charger.c
+++ b/drivers/power/supply/ltc4162-l-charger.c
@@ -1,9 +1,14 @@ 
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- *  Driver for Analog Devices (Linear Technology) LTC4162-L charger IC.
+ *  Driver for Analog Devices (Linear Technology)
+ *  LTC4162-L 35V/3.2A Multi-Cell Lithium-Ion Step-Down Battery Charger
+ *  LTC4162-F 35V/3.2A Multi-Cell LiFePO4 Step-Down Battery Charger
+ *  LTC4162-S 35V/3.2A Lead-Acid Step-Down Battery Charger
+ *  LTC4015 35V/3.2A Multichemistry Buck Battery Charger Controller
  *  Copyright (C) 2020, Topic Embedded Products
  */
 
+#include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/of.h>
@@ -47,6 +52,20 @@ 
 #define LTC4162L_VBAT_FILT			0x47
 #define LTC4162L_INPUT_UNDERVOLTAGE_DAC		0x4B
 
+#define LTC4162L_CHEM_MASK			GENMASK(11, 8)
+
+enum ltc4162_chem {
+	ltc4162_lad,
+	ltc4162_l42,
+	ltc4162_l41,
+	ltc4162_l40,
+	ltc4162_fad,
+	ltc4162_ffs,
+	ltc4162_fst,
+	ltc4162_sst = 8,
+	ltc4162_sad,
+};
+
 /* Enumeration as in datasheet. Individual bits are mutually exclusive. */
 enum ltc4162l_state {
 	battery_detection = 2048,
@@ -75,10 +94,28 @@  enum ltc4162l_charge_status {
 /* Magic number to write to ARM_SHIP_MODE register */
 #define LTC4162L_ARM_SHIP_MODE_MAGIC 21325
 
+struct ltc4162l_info;
+
+struct ltc4162l_chip_info {
+	const char *name;
+	int (*get_vbat)(struct ltc4162l_info *info, unsigned int reg,
+			union power_supply_propval *val);
+	int (*get_vcharge)(struct ltc4162l_info *info, unsigned int reg,
+			   union power_supply_propval *val);
+	int (*set_vcharge)(struct ltc4162l_info *info, unsigned int reg,
+			   unsigned int value);
+	int (*get_die_temp)(struct ltc4162l_info *info,
+			    union power_supply_propval *val);
+	unsigned int ibat_resolution_uv;
+	unsigned int vin_resolution_mv;
+	u8 telemetry_mask;
+};
+
 struct ltc4162l_info {
 	struct i2c_client	*client;
 	struct regmap		*regmap;
 	struct power_supply	*charger;
+	const struct ltc4162l_chip_info *chip_info;
 	u32 rsnsb;	/* Series resistor that sets charge current, microOhm */
 	u32 rsnsi;	/* Series resistor to measure input current, microOhm */
 	u8 cell_count;	/* Number of connected cells, 0 while unknown */
@@ -108,6 +145,18 @@  static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info)
 	return val;
 };
 
+static u8 ltc4162l_get_chem_type(struct ltc4162l_info *info)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val);
+	if (ret)
+		return ret;
+
+	return FIELD_GET(LTC4162L_CHEM_MASK, val);
+};
+
 /* Convert enum value to POWER_SUPPLY_STATUS value */
 static int ltc4162l_state_decode(enum ltc4162l_state value)
 {
@@ -223,25 +272,83 @@  static int ltc4162l_get_vbat(struct ltc4162l_info *info,
 				  unsigned int reg,
 				  union power_supply_propval *val)
 {
-	unsigned int regval;
+	unsigned int regval, chem_type;
 	int ret;
 
 	ret = regmap_read(info->regmap, reg, &regval);
 	if (ret)
 		return ret;
 
-	/* cell_count × 192.4μV/LSB */
-	regval *= 1924;
-	regval *= ltc4162l_get_cell_count(info);
-	regval /= 10;
-	val->intval = regval;
+	/*
+	 * cell_count × scaling factor
+	 * For ltc4162-s, it uses a cell_count value of 2 for each group of 3
+	 * physical (2V) cells, thus will return 2, 4, 6, 8 for 6V, 12V, 18V,
+	 * and 24V respectively, and has to divide by 2 to multiply the scale
+	 * factor by 1, 2, 3, or 4 to represent a 6V, 12V, 18V, or 24V battery
+	 * respectively.
+	 */
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_fst:
+		regval *= 1924;
+		regval *= ltc4162l_get_cell_count(info);
+		regval /= 10;
+		val->intval = regval;
 
-	return 0;
+		return 0;
+	case ltc4162_sst ... ltc4162_sad:
+		regval *= 3848;
+		regval *= ltc4162l_get_cell_count(info) / 2;
+		regval /= 10;
+		val->intval = regval;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc4015_get_vbat(struct ltc4162l_info *info,
+			    unsigned int reg,
+			    union power_supply_propval *val)
+{
+	unsigned int regval, chem_type;
+	int ret;
+
+	ret = regmap_read(info->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	/*
+	 * cell count x scaling factor
+	 * ltc4015 lead-acid fixed and lead-acid programmable corresponds to
+	 * 0x7 and 0x8 chem respectively
+	 */
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_fst:
+		regval *= 192264;
+		regval *= ltc4162l_get_cell_count(info);
+		regval /= 1000;
+		val->intval = regval;
+
+		return 0;
+	case ltc4162_sst - 1 ... ltc4162_sad - 1:
+		regval *= 128176;
+		regval *= ltc4162l_get_cell_count(info);
+		regval /= 1000;
+		val->intval = regval;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int ltc4162l_get_ibat(struct ltc4162l_info *info,
 			     union power_supply_propval *val)
 {
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	unsigned int regval;
 	int ret;
 
@@ -249,9 +356,8 @@  static int ltc4162l_get_ibat(struct ltc4162l_info *info,
 	if (ret)
 		return ret;
 
-	/* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */
 	ret = (s16)(regval & 0xFFFF);
-	val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb);
+	val->intval = mult_frac(ret, chip_info->ibat_resolution_uv, info->rsnsb);
 
 	return 0;
 }
@@ -260,6 +366,7 @@  static int ltc4162l_get_ibat(struct ltc4162l_info *info,
 static int ltc4162l_get_input_voltage(struct ltc4162l_info *info,
 				      union power_supply_propval *val)
 {
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	unsigned int regval;
 	int ret;
 
@@ -267,8 +374,7 @@  static int ltc4162l_get_input_voltage(struct ltc4162l_info *info,
 	if (ret)
 		return ret;
 
-	/* 1.649mV/LSB */
-	val->intval =  regval * 1694;
+	val->intval =  regval * chip_info->vin_resolution_mv;
 
 	return 0;
 }
@@ -276,6 +382,7 @@  static int ltc4162l_get_input_voltage(struct ltc4162l_info *info,
 static int ltc4162l_get_input_current(struct ltc4162l_info *info,
 				      union power_supply_propval *val)
 {
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	unsigned int regval;
 	int ret;
 
@@ -283,11 +390,9 @@  static int ltc4162l_get_input_current(struct ltc4162l_info *info,
 	if (ret)
 		return ret;
 
-	/* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */
 	ret = (s16)(regval & 0xFFFF);
-	ret *= 14660;
+	ret *= chip_info->ibat_resolution_uv;
 	ret /= info->rsnsi;
-	ret *= 100;
 
 	val->intval = ret;
 
@@ -336,7 +441,7 @@  static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
 				unsigned int reg,
 				union power_supply_propval *val)
 {
-	unsigned int regval;
+	unsigned int regval, chem_type;
 	int ret;
 	u32 voltage;
 
@@ -348,37 +453,177 @@  static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
 
 	/*
 	 * charge voltage setting can be computed from
-	 * cell_count × (vcharge_setting × 12.5mV + 3.8125V)
-	 * where vcharge_setting ranges from 0 to 31 (4.2V max).
+	 * cell_count × (vcharge_setting × a + b)
+	 * where vcharge_setting ranges from 0 to c (d).
+	 * for ltc4162l: a = 12.5mV , b = 3.8125V, c = 31, d = 4.2Vmax
+	 * for ltc4162f: a = 12.5mV , b = 3.4125V, c = 31, d = 3.8Vmax
+	 *
+	 * for ltc4162s, the charge voltage setting can be computed from
+	 * N x (vcharge_setting x 28.571mV + 6.0V)
+	 * where N is 1, 2, 3, or 4 for 6V, 12V, 18V, or 24V battery respectively,
+	 * and vcharge_setting ranges from 0 to 31
 	 */
-	voltage = 3812500 + (regval * 12500);
-	voltage *= ltc4162l_get_cell_count(info);
-	val->intval = voltage;
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_l40:
+		voltage = 3812500 + (regval * 12500);
+		voltage *= ltc4162l_get_cell_count(info);
+		val->intval = voltage;
 
-	return 0;
+		return 0;
+	case ltc4162_fad ... ltc4162_fst:
+		voltage = 3412500 + (regval * 12500);
+		voltage *= ltc4162l_get_cell_count(info);
+		val->intval = voltage;
+
+		return 0;
+	case ltc4162_sst ... ltc4162_sad:
+		voltage = 6000000 + (regval * 28571);
+		voltage *= ltc4162l_get_cell_count(info) / 2;
+		val->intval = voltage;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
 }
 
-static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
-				unsigned int reg,
-				unsigned int value)
+static int ltc4015_get_vcharge(struct ltc4162l_info *info,
+			       unsigned int reg,
+			       union power_supply_propval *val)
 {
-	u8 cell_count = ltc4162l_get_cell_count(info);
+	unsigned int regval, chem_type;
+	int ret;
+	u32 voltage;
+
+	ret = regmap_read(info->regmap, reg, &regval);
+	if (ret)
+		return ret;
 
-	if (!cell_count)
-		return -EBUSY; /* Not available yet, try again later */
+	regval &= BIT(6) - 1; /* Only the lower 5 bits */
+
+	/*
+	 * charge voltage setting can be computed from:
+	 * cell_count × (vcharge_setting × a + b)
+	 * where vcharge_setting ranges from 0 to c (d).
+	 * Li-Ion: a = 1/80V, b = 3.8125V, c = 31, d = 4.2Vmax
+	 * LiFePO4: a = 1/80V, b = 3.4125V, c = 31, d = 3.8Vmax
+	 * Lead Acid: a = 1/105V, b = 2V, c = 35, d = 2.6Vmax
+	 */
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_l40:
+		voltage = 3812500 + (regval * 12500);
+		voltage *= ltc4162l_get_cell_count(info);
+		val->intval = voltage;
+
+		return 0;
+	case ltc4162_fad ... ltc4162_fst:
+		voltage = 3412500 + (regval * 12500);
+		voltage *= ltc4162l_get_cell_count(info);
+		val->intval = voltage;
+
+		return 0;
+	case ltc4162_sst - 1 ... ltc4162_sad - 1:
+		voltage = 2000000 + mult_frac(regval, 1000000, 105);
+		voltage *= ltc4162l_get_cell_count(info);
+		val->intval = voltage;
 
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc4162l_vcharge(unsigned int base_voltage,
+			    unsigned int scale_factor,
+			    unsigned int range,
+			    unsigned int value,
+			    u8 cell_count)
+{
 	value /= cell_count;
 
-	if (value < 3812500)
+	if (value < base_voltage)
 		return -EINVAL;
 
-	value -= 3812500;
-	value /= 12500;
+	value -= base_voltage;
+	value /= scale_factor;
 
-	if (value > 31)
+	if (value > range)
 		return -EINVAL;
 
-	return regmap_write(info->regmap, reg, value);
+	return value;
+}
+
+static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
+				unsigned int reg,
+				unsigned int value)
+{
+	unsigned int chem_type;
+	u8 cell_count;
+
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_l40:
+		cell_count = ltc4162l_get_cell_count(info);
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(3812500, 12500, 31, value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	case ltc4162_fad ... ltc4162_fst:
+		cell_count = ltc4162l_get_cell_count(info);
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(3412500, 12500, 31, value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	case ltc4162_sst ... ltc4162_sad:
+		cell_count = ltc4162l_get_cell_count(info) / 2;
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(6000000, 28571, 31, value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc4015_set_vcharge(struct ltc4162l_info *info,
+			       unsigned int reg,
+			       unsigned int value)
+{
+	unsigned int chem_type;
+	u8 cell_count;
+
+	chem_type = ltc4162l_get_chem_type(info);
+	switch (chem_type) {
+	case ltc4162_lad ... ltc4162_l40:
+		cell_count = ltc4162l_get_cell_count(info);
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(3812500, 12500, 31, value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	case ltc4162_fad ... ltc4162_fst:
+		cell_count = ltc4162l_get_cell_count(info);
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(3412500, 12500, 31, value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	case ltc4162_sst - 1 ... ltc4162_sad - 1:
+		cell_count = ltc4162l_get_cell_count(info);
+		if (!cell_count)
+			return -EBUSY;
+
+		value = ltc4162l_vcharge(2000000, 1000000 / 105, 35,
+					 value, cell_count);
+		return regmap_write(info->regmap, reg, value);
+	default:
+		return -EINVAL;
+	}
 }
 
 static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info,
@@ -437,9 +682,30 @@  static int ltc4162l_get_die_temp(struct ltc4162l_info *info,
 	return 0;
 }
 
+static int ltc4015_get_die_temp(struct ltc4162l_info *info,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, &regval);
+	if (ret)
+		return ret;
+
+	/* (die_temp - 12010) / 45.6°C */
+	ret = (s16)(regval & 0xFFFF);
+	ret -= 12010;
+	ret *= 1000;
+	ret /= 456;
+	val->intval = ret;
+
+	return 0;
+}
+
 static int ltc4162l_get_term_current(struct ltc4162l_info *info,
 				     union power_supply_propval *val)
 {
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	unsigned int regval;
 	int ret;
 
@@ -457,10 +723,9 @@  static int ltc4162l_get_term_current(struct ltc4162l_info *info,
 	if (ret)
 		return ret;
 
-	/* 1.466μV / RSNSB amperes/LSB */
-	regval *= 14660u;
+	regval *= chip_info->ibat_resolution_uv;
 	regval /= info->rsnsb;
-	val->intval = 100 * regval;
+	val->intval = regval;
 
 	return 0;
 }
@@ -534,10 +799,11 @@  static ssize_t vbat_show(struct device *dev,
 {
 	struct power_supply *psy = to_power_supply(dev);
 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	union power_supply_propval val;
 	int ret;
 
-	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT, &val);
+	ret = chip_info->get_vbat(info, LTC4162L_VBAT, &val);
 	if (ret)
 		return ret;
 
@@ -550,10 +816,11 @@  static ssize_t vbat_avg_show(struct device *dev,
 {
 	struct power_supply *psy = to_power_supply(dev);
 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 	union power_supply_propval val;
 	int ret;
 
-	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, &val);
+	ret = chip_info->get_vbat(info, LTC4162L_VBAT_FILT, &val);
 	if (ret)
 		return ret;
 
@@ -589,7 +856,8 @@  static ssize_t force_telemetry_show(struct device *dev,
 	if (ret)
 		return ret;
 
-	return sysfs_emit(buf, "%u\n", regval & BIT(2) ? 1 : 0);
+	return sysfs_emit(buf, "%u\n", regval &
+			  info->chip_info->telemetry_mask ? 1 : 0);
 }
 
 static ssize_t force_telemetry_store(struct device *dev,
@@ -607,7 +875,8 @@  static ssize_t force_telemetry_store(struct device *dev,
 		return ret;
 
 	ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG,
-				 BIT(2), value ? BIT(2) : 0);
+				 info->chip_info->telemetry_mask,
+				 value ? info->chip_info->telemetry_mask : 0);
 	if (ret < 0)
 		return ret;
 
@@ -681,6 +950,7 @@  static int ltc4162l_get_property(struct power_supply *psy,
 				 union power_supply_propval *val)
 {
 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	const struct ltc4162l_chip_info *chip_info = info->chip_info;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
@@ -702,15 +972,13 @@  static int ltc4162l_get_property(struct power_supply *psy,
 		return ltc4162l_get_icharge(info,
 				LTC4162L_CHARGE_CURRENT_SETTING, val);
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
-		return ltc4162l_get_vcharge(info,
-				LTC4162L_VCHARGE_DAC, val);
+		return chip_info->get_vcharge(info, LTC4162L_VCHARGE_DAC, val);
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
-		return ltc4162l_get_vcharge(info,
-				LTC4162L_VCHARGE_SETTING, val);
+		return chip_info->get_vcharge(info, LTC4162L_VCHARGE_SETTING, val);
 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 		return ltc4162l_get_iin_limit_dac(info, val);
 	case POWER_SUPPLY_PROP_TEMP:
-		return ltc4162l_get_die_temp(info, val);
+		return chip_info->get_die_temp(info, val);
 	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 		return ltc4162l_get_term_current(info, val);
 	default:
@@ -772,7 +1040,6 @@  static enum power_supply_property ltc4162l_properties[] = {
 };
 
 static const struct power_supply_desc ltc4162l_desc = {
-	.name		= "ltc4162-l",
 	.type		= POWER_SUPPLY_TYPE_MAINS,
 	.properties	= ltc4162l_properties,
 	.num_properties	= ARRAY_SIZE(ltc4162l_properties),
@@ -781,6 +1048,50 @@  static const struct power_supply_desc ltc4162l_desc = {
 	.property_is_writeable = ltc4162l_property_is_writeable,
 };
 
+static const struct ltc4162l_chip_info ltc4162l_chip_info = {
+	.name = "ltc4162-l",
+	.get_vbat = ltc4162l_get_vbat,
+	.get_vcharge = ltc4162l_get_vcharge,
+	.set_vcharge = ltc4162l_set_vcharge,
+	.get_die_temp = ltc4162l_get_die_temp,
+	.ibat_resolution_uv = 1466000,
+	.vin_resolution_mv = 1649,
+	.telemetry_mask = BIT(2),
+};
+
+static const struct ltc4162l_chip_info ltc4162f_chip_info = {
+	.name = "ltc4162-f",
+	.get_vbat = ltc4162l_get_vbat,
+	.get_vcharge = ltc4162l_get_vcharge,
+	.set_vcharge = ltc4162l_set_vcharge,
+	.get_die_temp = ltc4162l_get_die_temp,
+	.ibat_resolution_uv = 1466000,
+	.vin_resolution_mv = 1649,
+	.telemetry_mask = BIT(2),
+};
+
+static const struct ltc4162l_chip_info ltc4162s_chip_info = {
+	.name = "ltc4162-s",
+	.get_vbat = ltc4162l_get_vbat,
+	.get_vcharge = ltc4162l_get_vcharge,
+	.set_vcharge = ltc4162l_set_vcharge,
+	.get_die_temp = ltc4162l_get_die_temp,
+	.ibat_resolution_uv = 1466000,
+	.vin_resolution_mv = 1649,
+	.telemetry_mask = BIT(2),
+};
+
+static const struct ltc4162l_chip_info ltc4015_chip_info = {
+	.name = "ltc4015",
+	.get_vbat = ltc4015_get_vbat,
+	.get_vcharge = ltc4015_get_vcharge,
+	.set_vcharge = ltc4015_set_vcharge,
+	.get_die_temp = ltc4015_get_die_temp,
+	.ibat_resolution_uv = 1464870,
+	.vin_resolution_mv = 1648,
+	.telemetry_mask = BIT(4),
+};
+
 static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg)
 {
 	/* all registers up to this one are writeable */
@@ -825,6 +1136,8 @@  static int ltc4162l_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct ltc4162l_info *info;
 	struct power_supply_config ltc4162l_config = {};
+	struct power_supply_desc *desc;
+	const struct ltc4162l_chip_info *chip_info;
 	u32 value;
 	int ret;
 
@@ -839,6 +1152,12 @@  static int ltc4162l_probe(struct i2c_client *client)
 	info->client = client;
 	i2c_set_clientdata(client, info);
 
+	chip_info = i2c_get_match_data(client);
+	if (!chip_info)
+		return -ENODEV;
+
+	info->chip_info = chip_info;
+
 	info->regmap = devm_regmap_init_i2c(client, &ltc4162l_regmap_config);
 	if (IS_ERR(info->regmap)) {
 		dev_err(dev, "Failed to initialize register map\n");
@@ -870,8 +1189,15 @@  static int ltc4162l_probe(struct i2c_client *client)
 	ltc4162l_config.drv_data = info;
 	ltc4162l_config.attr_grp = ltc4162l_attr_groups;
 
-	info->charger = devm_power_supply_register(dev, &ltc4162l_desc,
-						   &ltc4162l_config);
+	/* Duplicate the default descriptor to set name based on chip_info. */
+	desc = devm_kmemdup(dev, &ltc4162l_desc,
+			    sizeof(struct power_supply_desc), GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+
+	desc->name = chip_info->name;
+
+	info->charger = devm_power_supply_register(dev, desc, &ltc4162l_config);
 	if (IS_ERR(info->charger)) {
 		dev_err(dev, "Failed to register charger\n");
 		return PTR_ERR(info->charger);
@@ -903,14 +1229,20 @@  static void ltc4162l_alert(struct i2c_client *client,
 }
 
 static const struct i2c_device_id ltc4162l_i2c_id_table[] = {
-	{ "ltc4162-l" },
+	{ "ltc4162-l", (kernel_ulong_t)&ltc4162l_chip_info },
+	{ "ltc4162-f", (kernel_ulong_t)&ltc4162f_chip_info },
+	{ "ltc4162-s", (kernel_ulong_t)&ltc4162s_chip_info },
+	{ "ltc4015", (kernel_ulong_t)&ltc4015_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table);
 
 static const struct of_device_id ltc4162l_of_match[] __maybe_unused = {
-	{ .compatible = "lltc,ltc4162-l", },
-	{ },
+	{ .compatible = "lltc,ltc4162-l", .data = &ltc4162l_chip_info },
+	{ .compatible = "lltc,ltc4162-f", .data = &ltc4162f_chip_info },
+	{ .compatible = "lltc,ltc4162-s", .data = &ltc4162s_chip_info },
+	{ .compatible = "lltc,ltc4015", .data = &ltc4015_chip_info },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, ltc4162l_of_match);