diff mbox series

[v6,3/3] pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups

Message ID 20241206-lpm-v6-10-constraints-pmdomain-v6-3-833980158c68@baylibre.com
State New
Headers show
Series pmdomain: ti_sci: collect and send low-power mode constraints | expand

Commit Message

Kevin Hilman Dec. 6, 2024, 10:12 p.m. UTC 
When a device supports IO daisy-chain wakeups, it uses a dedicated
wake IRQ.  Devices with IO daisy-chain wakeups enabled should not set
wakeup constraints since these can happen even from deep power states,
so should not prevent the DM from picking deep power states.

Wake IRQs are set with dev_pm_set_wake_irq() or
dev_pm_set_dedicated_wake_irq().  The latter is used by the serial
driver used on K3 platforms (drivers/tty/serial/8250/8250_omap.c)
when the interrupts-extended property is used to describe the
dedicated wakeup interrupt.

Detect these wake IRQs in the suspend path, and if set, skip sending
constraint.

Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pmdomain/ti/ti_sci_pm_domains.c | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pmdomain/ti/ti_sci_pm_domains.c b/drivers/pmdomain/ti/ti_sci_pm_domains.c
index 587961519dcc9e13c32efe76cdaf801281f72f67..3fb78343d4388a7087dab5061c1127586968ef19 100644
--- a/drivers/pmdomain/ti/ti_sci_pm_domains.c
+++ b/drivers/pmdomain/ti/ti_sci_pm_domains.c
@@ -87,6 +87,15 @@  static inline void ti_sci_pd_set_wkup_constraint(struct device *dev)
 	int ret;
 
 	if (device_may_wakeup(dev)) {
+		/*
+		 * If device can wakeup using IO daisy chain wakeups,
+		 * we do not want to set a constraint.
+		 */
+		if (dev->power.wakeirq) {
+			dev_dbg(dev, "%s: has wake IRQ, not setting constraints\n", __func__);
+			return;
+		}
+
 		ret = ti_sci->ops.pm_ops.set_device_constraint(ti_sci, pd->idx,
 							       TISCI_MSG_CONSTRAINT_SET);
 		if (!ret)