diff mbox series

[v2,5/5] thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors

Message ID 20241209-mt8192-lvts-filtered-suspend-fix-v2-5-5b046a99baa9@collabora.com
State New
Headers show
Series thermal/drivers/mediatek/lvts: Fixes for suspend and IRQ storm, and cleanups | expand

Commit Message

Nícolas F. R. A. Prado Dec. 9, 2024, 5 p.m. UTC 
Only sensors that are valid need to have their interrupts enable status
updated based on their thresholds. Use the lvts_for_each_valid_sensor()
helper in lvts_update_irq_mask() to ignore invalid sensors.

Currently, since the invalid sensors will always contain zeroed out
thresholds (from kzalloc), they will always get their interrupts
disabled on this loop. So this commit doesn't change the resulting
interrupts configuration, but it slightly optimizes the loop by skipping
the invalid sensors, avoids potential future surprises if at some point
memory is no longer allocated for invalid sensors, as well as makes the
code more obvious.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 38668b5b34c7375d3a3b0dcf8dcc965a254776cc..088481d91e6e294a31fac7ceed7f3ff62ee3a98d 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -346,7 +346,7 @@  static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
 
 	value = readl(LVTS_MONINT(lvts_ctrl->base));
 
-	for (i = 0; i < ARRAY_SIZE(masks); i++) {
+	lvts_for_each_valid_sensor(i, lvts_ctrl) {
 		if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
 		    && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) {
 			/*