mbox series

[v2,0/4] mmc: samsung,exynos-dw-mshc: convert to dtschema

Message ID 20220605163710.144210-1-krzysztof.kozlowski@linaro.org
Headers show
Series mmc: samsung,exynos-dw-mshc: convert to dtschema | expand

Message

Krzysztof Kozlowski June 5, 2022, 4:37 p.m. UTC
Hi,

I will take the DTS patches via Samsung SoC.  The MMC dt-bindings patch
probably via MMC or Rob's tree.

Changes since v1
================
1. Add patch #4 documenting missing compatible.
2. Add Rb tags.

Best regards,
Krzysztof

Krzysztof Kozlowski (4):
  ARM: dts: exynos: align MMC node name with dtschema
  arm64: dts: exynos: align MMC node name with dtschema
  dt-bindings: mmc: samsung,exynos-dw-mshc: convert to dtschema
  dt-bindings: mmc: samsung,exynos-dw-mshc: document Exynos5420 SMU

 .../bindings/mmc/exynos-dw-mshc.txt           |  94 ----------
 .../bindings/mmc/samsung,exynos-dw-mshc.yaml  | 160 ++++++++++++++++++
 arch/arm/boot/dts/exynos3250.dtsi             |   6 +-
 arch/arm64/boot/dts/exynos/exynos5433.dtsi    |   6 +-
 4 files changed, 166 insertions(+), 100 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
 create mode 100644 Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml

Comments

Rob Herring (Arm) June 6, 2022, 7:04 p.m. UTC | #1
On Sun, 05 Jun 2022 18:37:09 +0200, Krzysztof Kozlowski wrote:
> Convert the Samsung Exynos SoC specific extensions to the Synopsys
> Designware Mobile Storage Host Controller to DT schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/mmc/exynos-dw-mshc.txt           |  94 -----------
>  .../bindings/mmc/samsung,exynos-dw-mshc.yaml  | 159 ++++++++++++++++++
>  2 files changed, 159 insertions(+), 94 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Ulf Hansson June 7, 2022, 10:43 a.m. UTC | #2
On Sun, 5 Jun 2022 at 18:37, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> Convert the Samsung Exynos SoC specific extensions to the Synopsys
> Designware Mobile Storage Host Controller to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  .../bindings/mmc/exynos-dw-mshc.txt           |  94 -----------
>  .../bindings/mmc/samsung,exynos-dw-mshc.yaml  | 159 ++++++++++++++++++
>  2 files changed, 159 insertions(+), 94 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> deleted file mode 100644
> index 753e9d7d8956..000000000000
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -* Samsung Exynos specific extensions to the Synopsys Designware Mobile
> -  Storage Host Controller
> -
> -The Synopsys designware mobile storage host controller is used to interface
> -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
> -differences between the core Synopsys dw mshc controller properties described
> -by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
> -extensions to the Synopsys Designware Mobile Storage Host Controller.
> -
> -Required Properties:
> -
> -* compatible: should be
> -       - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
> -         specific extensions.
> -       - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
> -         specific extensions.
> -       - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
> -         specific extensions.
> -       - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
> -         specific extensions.
> -       - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
> -         specific extensions.
> -       - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
> -         specific extensions having an SMU.
> -       - "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
> -         extensions.
> -
> -* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
> -  unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
> -  ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
> -
> -* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
> -  in transmit mode and CIU clock phase shift value in receive mode for single
> -  data rate mode operation. Refer notes below for the order of the cells and the
> -  valid values.
> -
> -* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
> -  in transmit mode and CIU clock phase shift value in receive mode for double
> -  data rate mode operation. Refer notes below for the order of the cells and the
> -  valid values.
> -* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
> -  shift value for hs400 mode operation.
> -
> -  Notes for the sdr-timing and ddr-timing values:
> -
> -    The order of the cells should be
> -      - First Cell: CIU clock phase shift value for tx mode.
> -      - Second Cell: CIU clock phase shift value for rx mode.
> -
> -    Valid values for SDR and DDR CIU clock timing for Exynos5250:
> -      - valid value for tx phase shift and rx phase shift is 0 to 7.
> -      - when CIU clock divider value is set to 3, all possible 8 phase shift
> -        values can be used.
> -      - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
> -        phase shift clocks should be 0.
> -
> -* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
> -  (Latency value for delay line in Read path)
> -
> -Required properties for a slot (Deprecated - Recommend to use one slot per host):
> -
> -* gpios: specifies a list of gpios used for command, clock and data bus. The
> -  first gpio is the command line and the second gpio is the clock line. The
> -  rest of the gpios (depending on the bus-width property) are the data lines in
> -  no particular order. The format of the gpio specifier depends on the gpio
> -  controller.
> -(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
> -
> -Example:
> -
> -  The MSHC controller node can be split into two portions, SoC specific and
> -  board specific portions as listed below.
> -
> -       dwmmc0@12200000 {
> -               compatible = "samsung,exynos5250-dw-mshc";
> -               reg = <0x12200000 0x1000>;
> -               interrupts = <0 75 0>;
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -       };
> -
> -       dwmmc0@12200000 {
> -               cap-mmc-highspeed;
> -               cap-sd-highspeed;
> -               broken-cd;
> -               fifo-depth = <0x80>;
> -               card-detect-delay = <200>;
> -               samsung,dw-mshc-ciu-div = <3>;
> -               samsung,dw-mshc-sdr-timing = <2 3>;
> -               samsung,dw-mshc-ddr-timing = <1 2>;
> -               samsung,dw-mshc-hs400-timing = <0 2>;
> -               samsung,read-strobe-delay = <90>;
> -               bus-width = <8>;
> -       };
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
> new file mode 100644
> index 000000000000..80c557e938a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> +  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
> +  Storage Host Controller
> +
> +maintainers:
> +  - Jaehoon Chung <jh80.chung@samsung.com>
> +  - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,exynos4210-dw-mshc
> +      - samsung,exynos4412-dw-mshc
> +      - samsung,exynos5250-dw-mshc
> +      - samsung,exynos5420-dw-mshc
> +      - samsung,exynos7-dw-mshc
> +      - samsung,exynos7-dw-mshc-smu
> +      - axis,artpec8-dw-mshc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +    description:
> +      Handle to "biu" and "ciu" clocks for the
> +      bus interface unit clock and the card interface unit clock.
> +
> +  clock-names:
> +    items:
> +      - const: biu
> +      - const: ciu
> +
> +  samsung,dw-mshc-ciu-div:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 7
> +    description:
> +      The divider value for the card interface unit (ciu) clock.
> +
> +  samsung,dw-mshc-ddr-timing:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    items:
> +      - description: CIU clock phase shift value for tx mode
> +        minimum: 0
> +        maximum: 7
> +      - description: CIU clock phase shift value for rx mode
> +        minimum: 0
> +        maximum: 7
> +    description:
> +      The value of CUI clock phase shift value in transmit mode and CIU clock
> +      phase shift value in receive mode for double data rate mode operation.
> +      See also samsung,dw-mshc-hs400-timing property.
> +
> +  samsung,dw-mshc-hs400-timing:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    items:
> +      - description: CIU clock phase shift value for tx mode
> +        minimum: 0
> +        maximum: 7
> +      - description: CIU clock phase shift value for rx mode
> +        minimum: 0
> +        maximum: 7
> +    description: |
> +      The value of CIU TX and RX clock phase shift value for HS400 mode
> +      operation.
> +      Valid values for SDR and DDR CIU clock timing::
> +        - valid value for tx phase shift and rx phase shift is 0 to 7.
> +        - when CIU clock divider value is set to 3, all possible 8 phase shift
> +          values can be used.
> +        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
> +          phase shift clocks should be 0.
> +      If missing, values from samsung,dw-mshc-ddr-timing property are used.
> +
> +  samsung,dw-mshc-sdr-timing:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    items:
> +      - description: CIU clock phase shift value for tx mode
> +        minimum: 0
> +        maximum: 7
> +      - description: CIU clock phase shift value for rx mode
> +        minimum: 0
> +        maximum: 7
> +    description:
> +      The value of CIU clock phase shift value in transmit mode and CIU clock
> +      phase shift value in receive mode for single data rate mode operation.
> +      See also samsung,dw-mshc-hs400-timing property.
> +
> +  samsung,read-strobe-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
> +      line in Read path). If missing, default from hardware is used.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - samsung,dw-mshc-ddr-timing
> +  - samsung,dw-mshc-sdr-timing
> +
> +allOf:
> +  - $ref: "synopsys-dw-mshc-common.yaml#"
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,exynos5250-dw-mshc
> +              - samsung,exynos5420-dw-mshc
> +              - samsung,exynos7-dw-mshc
> +              - samsung,exynos7-dw-mshc-smu
> +              - axis,artpec8-dw-mshc
> +    then:
> +      required:
> +        - samsung,dw-mshc-ciu-div
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/exynos5420.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    mmc@12220000 {
> +        compatible = "samsung,exynos5420-dw-mshc";
> +        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <0x12220000 0x1000>;
> +        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
> +        clock-names = "biu", "ciu";
> +        fifo-depth = <0x40>;
> +        card-detect-delay = <200>;
> +        samsung,dw-mshc-ciu-div = <3>;
> +        samsung,dw-mshc-sdr-timing = <0 4>;
> +        samsung,dw-mshc-ddr-timing = <0 2>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
> +        bus-width = <4>;
> +        cap-sd-highspeed;
> +        max-frequency = <200000000>;
> +        vmmc-supply = <&ldo19_reg>;
> +        vqmmc-supply = <&ldo13_reg>;
> +        sd-uhs-sdr50;
> +        sd-uhs-sdr104;
> +        sd-uhs-ddr50;
> +    };
> --
> 2.34.1
>