@@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
+/*
+ * Bank type for non-alive type. Bit fields:
+ * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
+ */
+static const struct samsung_pin_bank_type exynos850_bank_type_off = {
+ .fld_width = { 4, 1, 4, 4, 2, 4, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
+/*
+ * Bank type for alive type. Bit fields:
+ * CON: 4, DAT: 1, PUD: 4, DRV: 4
+ */
+static const struct samsung_pin_bank_type exynos850_bank_type_alive = {
+ .fld_width = { 4, 1, 4, 4, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
+};
+
/* Pad retention control code for accessing PMU regmap */
static atomic_t exynos_shared_retention_refcnt;
@@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
.ctrl = exynos7_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl),
};
+
+/* pin banks of exynos850 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynos850_pin_banks0[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+ EXYNOS850_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
+ EXYNOS850_PIN_BANK_EINTN(3, 0x0A0, "gpq0"),
+};
+
+/* pin banks of exynos850 pin-controller 1 (CMGP) */
+static const struct samsung_pin_bank_data exynos850_pin_banks1[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0C),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x0A0, "gpm5", 0x14),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x0C0, "gpm6", 0x18),
+ EXYNOS850_PIN_BANK_EINTW(1, 0x0E0, "gpm7", 0x1C),
+};
+
+/* pin banks of exynos850 pin-controller 2 (AUD) */
+static const struct samsung_pin_bank_data exynos850_pin_banks2[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
+};
+
+/* pin banks of exynos850 pin-controller 3 (HSI) */
+static const struct samsung_pin_bank_data exynos850_pin_banks3[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
+};
+
+/* pin banks of exynos850 pin-controller 4 (CORE) */
+static const struct samsung_pin_bank_data exynos850_pin_banks4[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
+};
+
+/* pin banks of exynos850 pin-controller 5 (PERI) */
+static const struct samsung_pin_bank_data exynos850_pin_banks5[] __initconst = {
+ /* Must start with EINTG banks, ordered by EINT group number. */
+ EXYNOS850_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0C),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x0A0, "gpg2", 0x14),
+ EXYNOS850_PIN_BANK_EINTG(1, 0x0C0, "gpg3", 0x18),
+ EXYNOS850_PIN_BANK_EINTG(3, 0x0E0, "gpc0", 0x1C),
+ EXYNOS850_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
+};
+
+static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
+ {
+ /* pin-controller instance 0 ALIVE data */
+ .pin_banks = exynos850_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks0),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ }, {
+ /* pin-controller instance 1 CMGP data */
+ .pin_banks = exynos850_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks1),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ }, {
+ /* pin-controller instance 2 AUD data */
+ .pin_banks = exynos850_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks2),
+ }, {
+ /* pin-controller instance 3 HSI data */
+ .pin_banks = exynos850_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks3),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 4 CORE data */
+ .pin_banks = exynos850_pin_banks4,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks4),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 5 PERI data */
+ .pin_banks = exynos850_pin_banks5,
+ .nr_banks = ARRAY_SIZE(exynos850_pin_banks5),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ },
+};
+
+const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
+ .ctrl = exynos850_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(exynos850_pin_ctrl),
+};
@@ -108,6 +108,35 @@
.pctl_res_idx = pctl_idx, \
} \
+#define EXYNOS850_PIN_BANK_EINTN(pins, reg, id) \
+ { \
+ .type = &exynos850_bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define EXYNOS850_PIN_BANK_EINTG(pins, reg, id, offs) \
+ { \
+ .type = &exynos850_bank_type_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_offset = offs, \
+ .name = id \
+ }
+
+#define EXYNOS850_PIN_BANK_EINTW(pins, reg, id, offs) \
+ { \
+ .type = &exynos850_bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = offs, \
+ .name = id \
+ }
+
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
@@ -1264,6 +1264,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
.data = &exynos5433_of_data },
{ .compatible = "samsung,exynos7-pinctrl",
.data = &exynos7_of_data },
+ { .compatible = "samsung,exynos850-pinctrl",
+ .data = &exynos850_of_data },
#endif
#ifdef CONFIG_PINCTRL_S3C64XX
{ .compatible = "samsung,s3c64xx-pinctrl",
@@ -339,6 +339,7 @@ extern const struct samsung_pinctrl_of_match_data exynos5410_of_data;
extern const struct samsung_pinctrl_of_match_data exynos5420_of_data;
extern const struct samsung_pinctrl_of_match_data exynos5433_of_data;
extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
extern const struct samsung_pinctrl_of_match_data s3c2416_of_data;
Add Samsung Exynos850 SoC specific data to enable pinctrl support for all platforms based on Exynos850. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- Changes in v3: - Added const qualifier to exynos850_bank_type_* structs - Added const and __initconst qualifiers to exynos850_pin_banks*[] arrays - Renamed EXYNOS9_* mactos to EXYNOS850_* Changes in v2: - Removed .suspend/.resume callbacks, as retention registers are not implemented yet for Exynos850 - Removed .eint_gpio_init for AUD domain, as there are no external interrupts available for that domain .../pinctrl/samsung/pinctrl-exynos-arm64.c | 116 ++++++++++++++++++ drivers/pinctrl/samsung/pinctrl-exynos.h | 29 +++++ drivers/pinctrl/samsung/pinctrl-samsung.c | 2 + drivers/pinctrl/samsung/pinctrl-samsung.h | 1 + 4 files changed, 148 insertions(+)