From patchwork Mon Oct 17 12:12:40 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Mahapatra, Amit Kumar" X-Patchwork-Id: 616662 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id BB2E8C4332F for ; Mon, 17 Oct 2022 12:14:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230164AbiJQMOL (ORCPT ); Mon, 17 Oct 2022 08:14:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51640 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229818AbiJQMOK (ORCPT ); Mon, 17 Oct 2022 08:14:10 -0400 Received: from NAM12-BN8-obe.outbound.protection.outlook.com (mail-bn8nam12on2089.outbound.protection.outlook.com [40.107.237.89]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B4D5B5F12F; Mon, 17 Oct 2022 05:13:56 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=nEZc/8jJzNzifmvSZqdhCe0Idgl4aWtWPnpg7/LHlZpbEECKM+z51eM4XhtlefROsS18QyPWrLKX/+diyBruBC42Nm2nRpA7pBvZ8pxwvoKTE7H5cOqZtySL3200aJrVM0a3JMMsqhBzS+hHUWzigwEv5cJ5fc80CvG9iqGtojnG6upSL2Lvb5Ejd70nWMnL1t1SBfpkTULNVFVwsCvU9iDLN4sjC5qr+feLfd4EUx4VKq1whnX/OU+vm4hXPIrxY7eIFROjOriTDxjmP0nTborPxr2tfDE1mcePm4Pb3wFW7vMruatycpL6xPZ/5BGONAaloMeFV9S0E4nLDt5myw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=LwId1J15c1hZBHXG6yKzjqkYWAraBlf3PpvoSqI68t0=; b=Pb97qqNgfRhN8flA0BJcEoVuRWJgzFvF9gOIVwKw7++dKGxv17DIq0OpBY03+3oSAbvvLVKBsGUbu2DU1EM1rdL/8tp5j0aYwVeWRmrzlj/ctmoGPz1tJQZO9x4SlUeGWT6pMeRVEvc9F64ikbzt0azE83QQSjMtXuwz/myduzN+jCM28kP/REQnB46+K1TGbTPjg44akfZL7mgBuE35vxkXtIE8zRzZ/SKOIWf5qH41B37dXWKTVGHPFAGU/+uZ/4wEVqYGzwCGauhTi/f+g0f/uYclkyGknpE2KaeN5gS4Nizf1hVl9sGXPXiVGnvCyqjZopk6KxzPDl4H1mey+w== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=kernel.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=LwId1J15c1hZBHXG6yKzjqkYWAraBlf3PpvoSqI68t0=; b=osBm0NTQsopOKEAa+5DH6QWzAI0pMxaTLNWkmRPXYxmJl/sr8NB4YiylMxyfr0v4yZ3qVQt1cI1mycHwYOdxJdDBZLsdp23YDzfjGTN1D8cv+9HKdOYlJlM2KZU4I8U8u3VVHLn1xCZw9eY39BrE6JrNDaOCOnVWf4jUTwviBVA= Received: from CY5P221CA0117.NAMP221.PROD.OUTLOOK.COM (2603:10b6:930:1f::11) by DS7PR12MB6008.namprd12.prod.outlook.com (2603:10b6:8:7f::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5723.29; Mon, 17 Oct 2022 12:13:53 +0000 Received: from CY4PEPF0000B8E8.namprd05.prod.outlook.com (2603:10b6:930:1f:cafe::c5) by CY5P221CA0117.outlook.office365.com (2603:10b6:930:1f::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5723.31 via Frontend Transport; Mon, 17 Oct 2022 12:13:53 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by CY4PEPF0000B8E8.mail.protection.outlook.com (10.167.241.4) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.5676.17 via Frontend Transport; Mon, 17 Oct 2022 12:13:52 +0000 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.31; Mon, 17 Oct 2022 07:13:48 -0500 Received: from xhdlakshmis40.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2375.31 via Frontend Transport; Mon, 17 Oct 2022 07:13:25 -0500 From: Amit Kumar Mahapatra To: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , CC: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Amit Kumar Mahapatra Subject: [PATCH 01/10] spi: Add stacked memories support in SPI core Date: Mon, 17 Oct 2022 17:42:40 +0530 Message-ID: <20221017121249.19061-2-amit.kumar-mahapatra@amd.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20221017121249.19061-1-amit.kumar-mahapatra@amd.com> References: <20221017121249.19061-1-amit.kumar-mahapatra@amd.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: CY4PEPF0000B8E8:EE_|DS7PR12MB6008:EE_ X-MS-Office365-Filtering-Correlation-Id: 345be05d-2aac-465e-40f9-08dab0390ea9 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17; CTRY:US; LANG:en; SCL:1; SRV:; IPV:CAL; SFV:NSPM; H:SATLEXMB04.amd.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230022)(4636009)(136003)(39860400002)(346002)(376002)(396003)(451199015)(46966006)(36840700001)(40470700004)(86362001)(36756003)(36860700001)(921005)(40460700003)(82740400003)(356005)(81166007)(40480700001)(316002)(4326008)(70586007)(70206006)(8676002)(110136005)(54906003)(2906002)(41300700001)(426003)(7406005)(30864003)(7366002)(7336002)(8936002)(7416002)(5660300002)(47076005)(2616005)(336012)(1076003)(186003)(83380400001)(82310400005)(478600001)(6666004)(26005)(83996005)(41080700001)(2101003)(36900700001); DIR:OUT; SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 17 Oct 2022 12:13:52.8662 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 345be05d-2aac-465e-40f9-08dab0390ea9 X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d; Ip=[165.204.84.17]; Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: CY4PEPF0000B8E8.namprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: DS7PR12MB6008 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org For supporting multiple CS the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. Multi CS support using GPIO is not tested due to unavailability of necessary hardware setup. Signed-off-by: Amit Kumar Mahapatra --- drivers/spi/spi.c | 86 ++++++++++++++++++++++++----------------- include/linux/spi/spi.h | 16 +++++++- 2 files changed, 65 insertions(+), 37 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8f97a3eacdea..1b1a891f4ccc 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -592,7 +592,7 @@ static void spi_dev_set_name(struct spi_device *spi) } dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev), - spi->chip_select); + spi->chip_select[0]); } static int spi_dev_check(struct device *dev, void *data) @@ -601,7 +601,8 @@ static int spi_dev_check(struct device *dev, void *data) struct spi_device *new_spi = data; if (spi->controller == new_spi->controller && - spi->chip_select == new_spi->chip_select) + spi->chip_select[0] == new_spi->chip_select[0] && + spi->chip_select[1] == new_spi->chip_select[1]) return -EBUSY; return 0; } @@ -616,7 +617,7 @@ static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; /* * We need to make sure there's no other device with this @@ -626,7 +627,7 @@ static int __spi_add_device(struct spi_device *spi) status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); if (status) { dev_err(dev, "chipselect %d already in use\n", - spi->chip_select); + spi->chip_select[0]); return status; } @@ -636,8 +637,10 @@ static int __spi_add_device(struct spi_device *spi) return -ENODEV; } - if (ctlr->cs_gpiods) - spi->cs_gpiod = ctlr->cs_gpiods[spi->chip_select]; + if (ctlr->cs_gpiods) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + spi->cs_gpiod[idx] = ctlr->cs_gpiods[spi->chip_select[idx]]; + } /* * Drivers may modify this initial i/o setup, but will @@ -677,13 +680,15 @@ int spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi->chip_select >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi->chip_select, - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi->chip_select[idx] >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi->chip_select[idx], + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -700,12 +705,15 @@ static int spi_add_device_locked(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; + int idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi->chip_select >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi->chip_select, - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi->chip_select[idx] >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi->chip_select[idx], + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -749,7 +757,7 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr, WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias)); - proxy->chip_select = chip->chip_select; + proxy->chip_select[0] = chip->chip_select; proxy->max_speed_hz = chip->max_speed_hz; proxy->mode = chip->mode; proxy->irq = chip->irq; @@ -953,29 +961,32 @@ static void spi_res_release(struct spi_controller *ctlr, struct spi_message *mes static void spi_set_cs(struct spi_device *spi, bool enable, bool force) { bool activate = enable; + u32 cs_num = __ffs(spi->cs_index_mask); + int idx; /* * Avoid calling into the driver (or doing delays) if the chip select * isn't actually changing from the last time this was called. */ - if (!force && ((enable && spi->controller->last_cs == spi->chip_select) || - (!enable && spi->controller->last_cs != spi->chip_select)) && + if (!force && ((enable && + spi->controller->last_cs == spi->chip_select[cs_num]) || + (!enable && + spi->controller->last_cs != spi->chip_select[cs_num])) && (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH))) return; trace_spi_set_cs(spi, activate); - spi->controller->last_cs = enable ? spi->chip_select : -1; + spi->controller->last_cs = enable ? spi->chip_select[cs_num] : -1; spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; - if ((spi->cs_gpiod || !spi->controller->set_cs_timing) && !activate) { + if ((spi->cs_gpiod[cs_num] || !spi->controller->set_cs_timing) && !activate) spi_delay_exec(&spi->cs_hold, NULL); - } if (spi->mode & SPI_CS_HIGH) enable = !enable; - if (spi->cs_gpiod) { + if (spi->cs_gpiod[cs_num]) { if (!(spi->mode & SPI_NO_CS)) { /* * Historically ACPI has no means of the GPIO polarity and @@ -988,10 +999,10 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) * into account. */ if (has_acpi_companion(&spi->dev)) - gpiod_set_value_cansleep(spi->cs_gpiod, !enable); + gpiod_set_value_cansleep(spi->cs_gpiod[cs_num], !enable); else /* Polarity handled by GPIO library */ - gpiod_set_value_cansleep(spi->cs_gpiod, activate); + gpiod_set_value_cansleep(spi->cs_gpiod[cs_num], activate); } /* Some SPI masters need both GPIO CS & slave_select */ if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && @@ -1001,7 +1012,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) spi->controller->set_cs(spi, !enable); } - if (spi->cs_gpiod || !spi->controller->set_cs_timing) { + if (spi->cs_gpiod[cs_num] || !spi->controller->set_cs_timing) { if (activate) spi_delay_exec(&spi->cs_setup, NULL); else @@ -2139,8 +2150,8 @@ void spi_flush_queue(struct spi_controller *ctlr) static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, struct device_node *nc) { - u32 value; - int rc; + u32 value, cs[SPI_CS_CNT_MAX] = {0}; + int rc, idx; /* Mode (clock phase/polarity/etc.) */ if (of_property_read_bool(nc, "spi-cpha")) @@ -2213,13 +2224,17 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } /* Device address */ - rc = of_property_read_u32(nc, "reg", &value); - if (rc) { + rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1, + SPI_CS_CNT_MAX); + if (rc < 0 || rc > ctlr->num_chipselect) { dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n", nc, rc); return rc; } - spi->chip_select = value; + for (idx = 0; idx < rc; idx++) + spi->chip_select[idx] = cs[idx]; + /* By default set the spi->cs_index_mask as 1 */ + spi->cs_index_mask = 0x01; /* Device speed */ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) @@ -2333,7 +2348,7 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi, strlcpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias)); /* Use provided chip-select for ancillary device */ - ancillary->chip_select = chip_select; + ancillary->chip_select[0] = chip_select; /* Take over SPI mode/speed from SPI main device */ ancillary->max_speed_hz = spi->max_speed_hz; @@ -2580,7 +2595,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr, spi->mode |= lookup.mode; spi->irq = lookup.irq; spi->bits_per_word = lookup.bits_per_word; - spi->chip_select = lookup.chip_select; + spi->chip_select[0] = lookup.chip_select; return spi; } @@ -3687,6 +3702,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) struct spi_controller *ctlr = spi->controller; struct spi_transfer *xfer; int w_size; + u32 cs_num = __ffs(spi->cs_index_mask); if (list_empty(&message->transfers)) return -EINVAL; @@ -3699,7 +3715,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * cs_change is set for each transfer. */ if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) || - spi->cs_gpiod)) { + spi->cs_gpiod[cs_num])) { size_t maxsize; int ret; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e6c73d5ff1a8..a7c2efedcc4c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -19,6 +19,9 @@ #include #include +/* Max no. of CS supported per spi device */ +#define SPI_CS_CNT_MAX 2 + struct dma_chan; struct software_node; struct ptp_system_timestamp; @@ -163,6 +166,7 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); * deasserted. If @cs_change_delay is used from @spi_transfer, then the * two delays will be added up. * @pcpu_statistics: statistics for the spi_device + * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -178,7 +182,7 @@ struct spi_device { struct spi_controller *controller; struct spi_controller *master; /* Compatibility layer */ u32 max_speed_hz; - u8 chip_select; + u8 chip_select[SPI_CS_CNT_MAX]; u8 bits_per_word; bool rt; #define SPI_NO_TX BIT(31) /* No transmit wire */ @@ -199,7 +203,7 @@ struct spi_device { void *controller_data; char modalias[SPI_NAME_SIZE]; const char *driver_override; - struct gpio_desc *cs_gpiod; /* Chip select gpio desc */ + struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /* Chip select gpio desc */ struct spi_delay word_delay; /* Inter-word delay */ /* CS delays */ struct spi_delay cs_setup; @@ -209,6 +213,14 @@ struct spi_device { /* The statistics */ struct spi_statistics __percpu *pcpu_statistics; + /* + * Bit mask of the chipselect(s) that the driver need to use from + * the chipselect array.When the controller is capable to handle + * multiple chip selects & memories are connected in parallel + * then more than one bit need to be set in cs_index_mask. + */ + u32 cs_index_mask : 2; + /* * likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: