From patchwork Wed May 8 10:58:52 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Artur Weber X-Patchwork-Id: 796010 Received: from mail-ej1-f44.google.com (mail-ej1-f44.google.com [209.85.218.44]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 04AFA82487; Wed, 8 May 2024 11:01:24 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.44 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715166087; cv=none; b=U6u60OTPcSozvri2+oSnmuHS+v8QV+G+Cp5MWA6O4JfjfU30ul9EUse20qGkFWsank5Cn97zG7wbwEGnIcvxzp2ypqMfrtfMMDm/DzLMM4dr9Ui+GFC62z27a9JVi6DBJjPkoT/ja9H7+8Ws6D9YSI51g5I4a+fgfQv6glXfsgc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715166087; c=relaxed/simple; bh=tvVeHRzJ1CkifWQbFGlvF0EVZIoz7vxKkkPUGFuk7jM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=LbB5PPbp5h1N1FsOvx96dlo/eZSWz/kdT0WNiR0kV7dRKE8V0PebjY0Uycly6lan/MNM4dnpo95j6NCLCIZ6CFP7usFrnEgvE+hq7Wed0LVtXZ0yAc5X63bQqK/Fo7xlHIq2eKFuuxX7UUXekdBpN7ajIyLvQGB/ZE6EPWXfCXQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=P4Xc2ENX; arc=none smtp.client-ip=209.85.218.44 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="P4Xc2ENX" Received: by mail-ej1-f44.google.com with SMTP id a640c23a62f3a-a59cf0bda27so377635266b.0; Wed, 08 May 2024 04:01:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1715166083; x=1715770883; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=poVyIDrS2b/ZXWDdTK9RH0R8g9cefahYbIBUWzC1UWE=; b=P4Xc2ENXNSNADs4o+c/Ylx7AQGssL+CJD029BKDfZRXSMNu1rMsAHw6lo8t8G6zrv5 X9J1PK2YwjygrAU4BKhTmi8WLi4ilaQDp5169vi9uCjdH+RN1BQlgq3qb7qBmoBJ/3s1 dd8RofHLkBaYJT+BANut6g5f0QJlLYWHLuVsW//izszBiiiuLABSc3pQ1YZ/WcYPKjyR m5WF0oArIgydzYd/AtpMj+m7TF6FrX7TnsPsRfuA6ktrT5kR03OssqV+WVVRCb0cY0aa U7iFP9adS01OZXu7V3kI2HqOComvBDcUncsTWVTlQeNYRHNk2m/X1ZkN8C1p5JmA/mQv KJzQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1715166083; x=1715770883; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=poVyIDrS2b/ZXWDdTK9RH0R8g9cefahYbIBUWzC1UWE=; b=UZYli6UbbP6DuUQlPmlkppGcZuS2NL5hEnKIB+D0lvcCHyc6vW0ofPmfLZXz5FEgoQ qgapmMEEbbiM5bDsGLzI8pjvkgpCvIJvyUdJwyr86BSoQHchqY9Cs4shrKRga+aFn1b1 bAMt5jZDnr2RlQKPrNV07mELomFL5IV6Ulp5DkflOs4/Fh0c4PVgdHxoNuewLgUS/MLE H3dhkfGNcppHvxgufjoSg8GC6DTWuW8NGpmFcBuL4jBiMIpOUrrcGbC4cEgqno7RwVyG f4sycVNxmXVD9xIx0/kzX5cjrB6GE+tUo+CSXlKIQDPVYkUF59n/8kQCQXzLPuluE7ot 7QQg== X-Forwarded-Encrypted: i=1; AJvYcCVcn5eTJJSNZQ10PuhEZ0Nin/ySZ5Gb7mvH94bEkffQ7pgwf4tG9u8bKYQIw95PQpRiu47BUAQcKMckNFkC09fZfEuD4koz4ImJX6FGKYlf1biq6T8mCSOvzFtze6pi2dyds206rsg0QeWg/BG5KOC9XCiggaok0vqiNR5/ic5RGLEP41L0obnxcsAEl1pYIJXTC2y5l5qYxk4DWXiZEpLs8L3pQ46id4c= X-Gm-Message-State: AOJu0Yw/Q+TgXsECTgTE/Zgh7R085liFxr9/u22GsDkLmTVM8Kk6Jndv xOGEt9PxohOIUaaNviFNfIZBPNpAVPQojdynP2+7VJgYXMO25gbq X-Google-Smtp-Source: AGHT+IErlStSHhT96t/fwnFEZHJuSLP/+wFJhG8ZdY2sMgKbw/O8rSpOa93NRwjSXZruRQb51QZNkA== X-Received: by 2002:a50:baa4:0:b0:572:325a:8515 with SMTP id 4fb4d7f45d1cf-5731da69864mr2264617a12.36.1715166083131; Wed, 08 May 2024 04:01:23 -0700 (PDT) Received: from hex.my.domain (83.8.126.253.ipv4.supernova.orange.pl. [83.8.126.253]) by smtp.gmail.com with ESMTPSA id m6-20020a056402510600b005726b58a436sm7455793edd.30.2024.05.08.04.01.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 08 May 2024 04:01:22 -0700 (PDT) From: Artur Weber Date: Wed, 08 May 2024 12:58:52 +0200 Subject: [PATCH v2 4/7] ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection Precedence: bulk X-Mailing-List: linux-samsung-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240508-midas-wm1811-gpio-jack-v2-4-b4d36cd02c6e@gmail.com> References: <20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e@gmail.com> In-Reply-To: <20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e@gmail.com> To: Sylwester Nawrocki , Krzysztof Kozlowski Cc: Liam Girdwood , Mark Brown , Rob Herring , Conor Dooley , Jaroslav Kysela , Takashi Iwai , Alim Akhtar , alsa-devel@alsa-project.org, linux-sound@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Artur Weber X-Mailer: b4 0.13.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1715166076; l=12054; i=aweber.kernel@gmail.com; s=20231030; h=from:subject:message-id; bh=tvVeHRzJ1CkifWQbFGlvF0EVZIoz7vxKkkPUGFuk7jM=; b=V677zzpo8A7us92yAktmq5gJ+zyaHEVr7Zft2eFcqj3mrO1MOtjS/95kPwIwYR4ypCfWpwUHC uhHCuobK+CsC+PXlwA4nqSae+/5+hzhAktw2rS+3V+8q2YEHSuPSw5P X-Developer-Key: i=aweber.kernel@gmail.com; a=ed25519; pk=RhDBfWbJEHqDibXbhNEBAnc9FMkyznGxX/hwfhL8bv8= Some Samsung devices that use the midas_wm1811 driver use a GPIO-based method for detecting whether the headset jack is plugged in, as well as detecting which headset buttons are pressed. There are two GPIOs: a "headset detect" GPIO responsible for detecting jack insertion, and a "headset key" GPIO which triggers when a button on the headset is pressed. The plug type and the button pressed are determined based on information from an ADC channel. The headset mic is enabled by a headset mic bias regulator. Add support for the GPIO-based headset jack detection mechanism, and make it configurable from the device tree. This implementation borrows somewhat from the aries_wm8994.c driver, though there are a few changes to make the code cleaner, and to add support for DT-based configuration. Notably, a dependency on IIO is introduced, to accommodate the ADC reading requirement. Signed-off-by: Artur Weber --- Changes in v2: - Added separate headset mic bias regulator - Added samsung preset to threshold properties - Replaced dev_err+return with return dev_err_probe where needed --- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 286 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 277 insertions(+), 11 deletions(-) diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 93c2b1b08d0a..4b1ea7b2c796 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -140,7 +140,7 @@ config SND_SOC_SAMSUNG_ARIES_WM8994 config SND_SOC_SAMSUNG_MIDAS_WM1811 tristate "SoC I2S Audio support for Midas boards" - depends on SND_SOC_SAMSUNG + depends on SND_SOC_SAMSUNG && IIO select SND_SAMSUNG_I2S select SND_SOC_WM8994 help diff --git a/sound/soc/samsung/midas_wm1811.c b/sound/soc/samsung/midas_wm1811.c index ab0a4804b45e..ce94550ee32e 100644 --- a/sound/soc/samsung/midas_wm1811.c +++ b/sound/soc/samsung/midas_wm1811.c @@ -7,7 +7,9 @@ #include #include +#include #include +#include #include #include #include @@ -32,6 +34,9 @@ struct midas_priv { struct regulator *reg_headset_mic_bias; struct gpio_desc *gpio_fm_sel; struct gpio_desc *gpio_lineout_sel; + struct gpio_desc *gpio_headset_detect; + struct gpio_desc *gpio_headset_key; + struct iio_channel *adc_headset_detect; unsigned int fll1_rate; struct snd_soc_jack headset_jack; @@ -48,6 +53,131 @@ static struct snd_soc_jack_pin headset_jack_pins[] = { }, }; +/* + * min_mv/max_mv values in this struct are set up based on DT values. + */ +static struct snd_soc_jack_zone headset_jack_zones[] = { + { .jack_type = SND_JACK_HEADPHONE, }, + { .jack_type = SND_JACK_HEADSET, }, + { .jack_type = SND_JACK_HEADPHONE, }, +}; + +/* + * This is used for manual detection in headset_key_check, we reuse the + * structure since it's convenient. + * + * min_mv/max_mv values in this struct are set up based on DT values. + */ +static struct snd_soc_jack_zone headset_key_zones[] = { + { .jack_type = SND_JACK_BTN_0, }, /* Media */ + { .jack_type = SND_JACK_BTN_1, }, /* Volume Up */ + { .jack_type = SND_JACK_BTN_2, }, /* Volume Down */ +}; + +static int headset_jack_check(void *data) +{ + struct midas_priv *priv = (struct midas_priv *) data; + int adc, jack_type, ret; + int bias_already_on = 0; + + if (!gpiod_get_value_cansleep(priv->gpio_headset_detect)) + return 0; + + if (priv->reg_headset_mic_bias) { + /* + * Get state of Headset Mic switch by checking the headset mic + * bias regulator + */ + bias_already_on = \ + regulator_is_enabled(priv->reg_headset_mic_bias); + + /* + * If it's not enabled yet, temporarily enable headset mic bias + * for ADC measurement + */ + if (bias_already_on < 0) + pr_err("%s: Failed to get headset mic bias state: %d", + __func__, ret); + else if (!bias_already_on) { + ret = regulator_enable(priv->reg_headset_mic_bias); + if (ret) + pr_err("%s: Failed to enable micbias: %d\n", + __func__, ret); + } + } + + /* Sleep for a small amount of time to get the value to stabilize */ + msleep(20); + + ret = iio_read_channel_processed(priv->adc_headset_detect, &adc); + if (ret) { + pr_err("%s: Failed to read ADC (%d), assuming headphones\n", + __func__, ret); + return SND_JACK_HEADPHONE; + } + pr_debug("%s: ADC value is %d\n", __func__, adc); + + jack_type = snd_soc_jack_get_type(&priv->headset_jack, adc); + + /* + * Revert the headset mic bias supply to its previous state + * (i.e. if it was disabled before the check, disable it again) + */ + if (priv->reg_headset_mic_bias && bias_already_on == 0) { + ret = regulator_disable(priv->reg_headset_mic_bias); + if (ret) + pr_err("%s: Failed to disable micbias: %d\n", + __func__, ret); + } + + return jack_type; +} + +static int headset_key_check(void *data) +{ + struct midas_priv *priv = (struct midas_priv *) data; + int adc, i, ret; + + if (!gpiod_get_value_cansleep(priv->gpio_headset_key)) + return 0; + + /* Filter out keypresses when 4 pole jack not detected */ + if (!(priv->headset_jack.status & SND_JACK_MICROPHONE)) + return 0; + + ret = iio_read_channel_processed(priv->adc_headset_detect, &adc); + if (ret) { + pr_err("%s: Failed to read ADC (%d), can't detect key type\n", + __func__, ret); + return 0; + } + pr_debug("%s: ADC value is %d\n", __func__, adc); + + for (i = 0; i < ARRAY_SIZE(headset_key_zones); i++) { + if (adc >= headset_key_zones[i].min_mv && + adc <= headset_key_zones[i].max_mv) { + return headset_key_zones[i].jack_type; + } + } + + return 0; +} + +static struct snd_soc_jack_gpio headset_gpio[] = { + { + .name = "Headset Jack", + .report = SND_JACK_HEADSET, + .debounce_time = 150, + .jack_status_check = headset_jack_check, + }, + { + .name = "Headset Key", + .report = SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + .debounce_time = 30, + .jack_status_check = headset_key_check, + }, +}; + static int midas_start_fll1(struct snd_soc_pcm_runtime *rtd, unsigned int rate) { struct snd_soc_card *card = rtd->card; @@ -335,18 +465,67 @@ static int midas_late_probe(struct snd_soc_card *card) return ret; } - ret = snd_soc_card_jack_new_pins(card, "Headset", - SND_JACK_HEADSET | SND_JACK_MECHANICAL | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | - SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5, - &priv->headset_jack, - headset_jack_pins, - ARRAY_SIZE(headset_jack_pins)); - if (ret) + if (!priv->gpio_headset_detect) { + ret = snd_soc_card_jack_new_pins(card, "Headset", + SND_JACK_HEADSET | SND_JACK_MECHANICAL | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3 | + SND_JACK_BTN_4 | SND_JACK_BTN_5, + &priv->headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); + if (ret) + return ret; + + wm8958_mic_detect(aif1_dai->component, &priv->headset_jack, + NULL, NULL, NULL, NULL); + } else { + /* Some devices (n8000, t310) use a GPIO to detect the jack. */ + ret = snd_soc_card_jack_new_pins(card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2, + &priv->headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); + if (ret) { + dev_err(card->dev, + "Failed to set up headset pins: %d\n", ret); + return ret; + } + + ret = snd_soc_jack_add_zones(&priv->headset_jack, + ARRAY_SIZE(headset_jack_zones), + headset_jack_zones); + if (ret) { + dev_err(card->dev, + "Failed to set up headset zones: %d\n", ret); + return ret; + } + + headset_gpio[0].data = priv; + headset_gpio[0].desc = priv->gpio_headset_detect; + + headset_gpio[1].data = priv; + headset_gpio[1].desc = priv->gpio_headset_key; + + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_1, KEY_VOLUMEUP); + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_2, KEY_VOLUMEDOWN); + + ret = snd_soc_jack_add_gpios(&priv->headset_jack, + ARRAY_SIZE(headset_gpio), + headset_gpio); + if (ret) + dev_err(card->dev, + "Failed to set up headset jack GPIOs: %d\n", + ret); + return ret; + } - wm8958_mic_detect(aif1_dai->component, &priv->headset_jack, - NULL, NULL, NULL, NULL); return 0; } @@ -453,6 +632,9 @@ static int midas_probe(struct platform_device *pdev) struct snd_soc_card *card = &midas_card; struct device *dev = &pdev->dev; static struct snd_soc_dai_link *dai_link; + enum iio_chan_type channel_type; + u32 fourpole_threshold[2]; + u32 button_threshold[3]; struct midas_priv *priv; int ret, i; @@ -499,6 +681,90 @@ static int midas_probe(struct platform_device *pdev) return PTR_ERR(priv->gpio_lineout_sel); } + priv->gpio_headset_detect = devm_gpiod_get_optional(dev, + "headset-detect", GPIOD_IN); + if (IS_ERR(priv->gpio_headset_detect)) + return dev_err_probe(dev, PTR_ERR(priv->gpio_headset_detect), + "Failed to get headset jack detect GPIO\n"); + + if (priv->gpio_headset_detect) { + priv->adc_headset_detect = devm_iio_channel_get(dev, + "headset-detect"); + if (IS_ERR(priv->adc_headset_detect)) + return dev_err_probe(dev, + PTR_ERR(priv->adc_headset_detect), + "Failed to get ADC channel\n"); + + ret = iio_get_channel_type(priv->adc_headset_detect, + &channel_type); + if (ret) { + dev_err(dev, "Failed to get ADC channel type\n"); + return ret; + } + + if (channel_type != IIO_VOLTAGE) { + dev_err(dev, "ADC channel is not voltage\n"); + return ret; + } + + priv->gpio_headset_key = devm_gpiod_get(dev, "headset-key", + GPIOD_IN); + if (IS_ERR(priv->gpio_headset_key)) + return dev_err_probe(dev, + PTR_ERR(priv->gpio_headset_key), + "Failed to get headset key GPIO\n"); + + ret = of_property_read_u32_array(dev->of_node, + "samsung,headset-4pole-threshold-microvolt", + fourpole_threshold, + ARRAY_SIZE(fourpole_threshold)); + if (ret) { + dev_err(dev, "Failed to get 4-pole jack detection threshold\n"); + return ret; + } + + if (fourpole_threshold[0] > fourpole_threshold[1]) { + dev_err(dev, "Invalid 4-pole jack detection threshold value\n"); + return -EINVAL; + } + + headset_jack_zones[0].max_mv = (fourpole_threshold[0]); + headset_jack_zones[1].min_mv = (fourpole_threshold[0] + 1); + + headset_jack_zones[1].max_mv = (fourpole_threshold[1]); + headset_jack_zones[2].min_mv = (fourpole_threshold[1] + 1); + + ret = of_property_read_u32_array(dev->of_node, + "samsung,headset-button-threshold-microvolt", + button_threshold, + ARRAY_SIZE(button_threshold)); + if (ret) { + dev_err(dev, "Failed to get headset button detection threshold\n"); + return ret; + } + + if (button_threshold[0] > button_threshold[1] || + button_threshold[1] > button_threshold[2]) { + dev_err(dev, "Invalid headset button detection threshold value\n"); + return -EINVAL; + } + + for (i = 0; i < 3; i++) { + if (i != 0 && button_threshold[i] <= 0) { + dev_err(dev, "Invalid headset button detection threshold value\n"); + return -EINVAL; + } + + headset_key_zones[i].min_mv = button_threshold[i]; + + if (i == 2) + headset_key_zones[i].max_mv = UINT_MAX; + else + headset_key_zones[i].max_mv = \ + (button_threshold[i+1] - 1); + } + } + ret = snd_soc_of_parse_card_name(card, "model"); if (ret < 0) { dev_err(dev, "Card name is not specified\n");