diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index 5b046932f..f711e23c0 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -11,11 +11,21 @@ maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
-  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
-  USI shares almost all internal circuits within each protocol, so only one
-  protocol can be chosen at a time. USI is modeled as a node with zero or more
-  child nodes, each representing a serial sub-node device. The mode setting
-  selects which particular function will be used.
+  The USI IP-core provides configurable support for serial protocols, enabling
+  different serial communication modes depending on the version.
+
+  In USIv1, configurations are available to enable either one or two protocols
+  simultaneously in select combinations - High-Speed I2C0, High-Speed
+  I2C1, SPI, UART, High-Speed I2C0 and I2C1 or both High-Speed
+  I2C1 and UART.
+
+  In USIv2, only one protocol can be active at a time, either UART, SPI, or
+  High-Speed I2C.
+
+  The USI core shares internal circuits across protocols, meaning only the
+  selected configuration is active at any given time. USI is modeled as a node
+  with zero or more child nodes, each representing a serial sub-node device. The
+  mode setting selects which particular function will be used.
 
 properties:
   $nodename:
@@ -31,6 +41,7 @@ properties:
           - const: samsung,exynos850-usi
       - enum:
           - samsung,exynos850-usi
+          - samsung,exynos8895-usi
 
   reg:
     maxItems: 1
@@ -64,7 +75,7 @@ properties:
 
   samsung,mode:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2, 3]
+    enum: [0, 1, 2, 3, 4, 5, 6]
     description:
       Selects USI function (which serial protocol to use). Refer to
       <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
@@ -101,37 +112,59 @@ required:
   - samsung,sysreg
   - samsung,mode
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos850-usi
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-usi
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI/I2C protocol
+
+        clock-names:
+          maxItems: 2
+
+        samsung,mode:
+          enum: [0, 1, 2, 3]
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos8895-usi
 
-then:
-  properties:
-    reg:
-      maxItems: 1
+    then:
+      properties:
+        reg: false
 
-    clocks:
-      items:
-        - description: Bus (APB) clock
-        - description: Operating clock for UART/SPI/I2C protocol
+        clocks:
+          items:
+            - description: Bus (APB) clock
+            - description: Operating clock for UART/SPI protocol
 
-    clock-names:
-      maxItems: 2
+        clock-names:
+          maxItems: 2
 
-  required:
-    - reg
-    - clocks
-    - clock-names
+        samsung,clkreq-on: false
 
-else:
-  properties:
-    reg: false
-    clocks: false
-    clock-names: false
-    samsung,clkreq-on: false
+      required:
+        - clocks
+        - clock-names
 
 additionalProperties: false
 
@@ -144,7 +177,7 @@ examples:
         compatible = "samsung,exynos850-usi";
         reg = <0x138200c0 0x20>;
         samsung,sysreg = <&sysreg_peri 0x1010>;
-        samsung,mode = <USI_V2_UART>;
+        samsung,mode = <USI_MODE_UART>;
         samsung,clkreq-on; /* needed for UART mode */
         #address-cells = <1>;
         #size-cells = <1>;
diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h
index a01af169d..b46de214d 100644
--- a/include/dt-bindings/soc/samsung,exynos-usi.h
+++ b/include/dt-bindings/soc/samsung,exynos-usi.h
@@ -9,9 +9,18 @@
 #ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
 #define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
 
-#define USI_V2_NONE		0
-#define USI_V2_UART		1
-#define USI_V2_SPI		2
-#define USI_V2_I2C		3
+#define USI_MODE_NONE		0
+#define USI_MODE_UART		1
+#define USI_MODE_SPI		2
+#define USI_MODE_I2C		3
+#define USI_MODE_I2C1		4
+#define USI_MODE_I2C0_1		5
+#define USI_MODE_UART_I2C1	6
+
+/* Deprecated */
+#define USI_V2_NONE		USI_MODE_NONE
+#define USI_V2_UART		USI_MODE_UART
+#define USI_V2_SPI		USI_MODE_SPI
+#define USI_V2_I2C		USI_MODE_I2C
 
 #endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */
