diff mbox series

[V5,15/31] smartpqi: add support for wwid

Message ID 161549378041.25025.3869709982357729841.stgit@brunhilda
State New
Headers show
Series [V5,01/31] smartpqi: use host wide tagspace | expand

Commit Message

Don Brace March 11, 2021, 8:16 p.m. UTC 
From: Kevin Barnett <kevin.barnett@microchip.com>

Wwid has been added to Report Physical LUNs in
newer controller firmware. The presence of this field
is detected by a feature bit. Add in detection of this
new feature and store the wwid when set.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi.h      |    5 ++++-
 drivers/scsi/smartpqi/smartpqi_init.c |   24 +++++++++++++++++++++++-
 2 files changed, 27 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 8e5e2543c7cf..a579d772dce0 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -853,7 +853,8 @@  struct pqi_config_table_firmware_features {
 #define PQI_FIRMWARE_FEATURE_RAID_IU_TIMEOUT			13
 #define PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT			14
 #define PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME	15
-#define PQI_FIRMWARE_FEATURE_MAXIMUM				15
+#define PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN	16
+#define PQI_FIRMWARE_FEATURE_MAXIMUM				16
 
 struct pqi_config_table_debug {
 	struct pqi_config_table_section_header header;
@@ -1110,6 +1111,7 @@  struct pqi_scsi_dev {
 	struct pqi_stream_data stream_data[NUM_STREAMS_PER_LUN];
 	atomic_t scsi_cmds_outstanding;
 	atomic_t raid_bypass_cnt;
+	u8	page_83_identifier[16];
 };
 
 /* VPD inquiry pages */
@@ -1303,6 +1305,7 @@  struct pqi_ctrl_info {
 	u8		soft_reset_handshake_supported : 1;
 	u8		raid_iu_timeout_supported : 1;
 	u8		tmf_iu_timeout_supported : 1;
+	u8		unique_wwid_in_report_phys_lun_supported : 1;
 	u8		enable_r1_writes : 1;
 	u8		enable_r5_writes : 1;
 	u8		enable_r6_writes : 1;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index d442aabf8fe8..a226b7e32e3d 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -1441,6 +1441,9 @@  static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info,
 		sizeof(device->phys_connector));
 	device->bay = id_phys->phys_bay_in_box;
 
+	memcpy(&device->page_83_identifier, &id_phys->page_83_identifier,
+		sizeof(device->page_83_identifier));
+
 	return 0;
 }
 
@@ -2045,6 +2048,16 @@  static inline bool pqi_expose_device(struct pqi_scsi_dev *device)
 	return !device->is_physical_device || !pqi_skip_device(device->scsi3addr);
 }
 
+static inline void pqi_set_physical_device_wwid(struct pqi_ctrl_info *ctrl_info,
+	struct pqi_scsi_dev *device, struct report_phys_lun_extended_entry *phys_lun_ext_entry)
+{
+	if (ctrl_info->unique_wwid_in_report_phys_lun_supported ||
+		pqi_is_device_with_sas_address(device))
+		device->wwid = phys_lun_ext_entry->wwid;
+	else
+		device->wwid = cpu_to_be64(get_unaligned_be64(&device->page_83_identifier));
+}
+
 static int pqi_update_scsi_devices(struct pqi_ctrl_info *ctrl_info)
 {
 	int i;
@@ -2210,7 +2223,7 @@  static int pqi_update_scsi_devices(struct pqi_ctrl_info *ctrl_info)
 		pqi_assign_bus_target_lun(device);
 
 		if (device->is_physical_device) {
-			device->wwid = phys_lun_ext_entry->wwid;
+			pqi_set_physical_device_wwid(ctrl_info, device, phys_lun_ext_entry);
 			if ((phys_lun_ext_entry->device_flags &
 				CISS_REPORT_PHYS_DEV_FLAG_AIO_ENABLED) &&
 				phys_lun_ext_entry->aio_handle) {
@@ -7407,6 +7420,10 @@  static void pqi_ctrl_update_feature_flags(struct pqi_ctrl_info *ctrl_info,
 	case PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT:
 		ctrl_info->tmf_iu_timeout_supported = firmware_feature->enabled;
 		break;
+	case PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN:
+		ctrl_info->unique_wwid_in_report_phys_lun_supported =
+			firmware_feature->enabled;
+		break;
 	}
 
 	pqi_firmware_feature_status(ctrl_info, firmware_feature);
@@ -7497,6 +7514,11 @@  static struct pqi_firmware_feature pqi_firmware_features[] = {
 		.feature_bit = PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME,
 		.feature_status = pqi_firmware_feature_status,
 	},
+	{
+		.feature_name = "Unique WWID in Report Physical LUN",
+		.feature_bit = PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN,
+		.feature_status = pqi_ctrl_update_feature_flags,
+	},
 };
 
 static void pqi_process_firmware_features(