diff mbox series

[08/17] lpfc: Fix NPIV discovery and Fabric Node detection

Message ID 20201115192646.12977-9-james.smart@broadcom.com
State New
Headers show
Series [01/17] lpfc: Rework remote port ref counting and node freeing | expand

Commit Message

James Smart Nov. 15, 2020, 7:26 p.m. UTC
While testing NPIV and link bounces, the vport would not show a fabric
node for the F_Port, would not transition into NPR state during a link
fault, or leave the FDMI node untouched during error injection. Cause
for this was determined to be an inconsistent manner in which F_Port,
Nameserver, and FDMI controller nodes were created and linked. In some
cases, the nodes would never be unregistered from the transport, leaving
references active. In other cases, the fabric nodes may register with
the transport multiple times while still registered.

The following changes were made:
- Fix the FDISC issue routine, which starts vport (re)creation, to mark
  the F_Port as a fabric node (NLP_FABRIC) and allow the F_Port node to
  fully be created and show up in the node list.
- When remote ports are cleaned up on vport termination, cleanup the
  nameserver and FDMI controller nodes on the vport so they unregister
  from the transport.
- On link bounces, don't exclude the NPIV Fabric remote ports from
  transitioning to the NPR state, allowing them to avoid re-registration
  if already registered.

Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
 drivers/scsi/lpfc/lpfc_els.c     |  4 ++++
 drivers/scsi/lpfc/lpfc_hbadisc.c | 11 +++++------
 2 files changed, 9 insertions(+), 6 deletions(-)
diff mbox series


diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 45a8ebbf60bc..6fc42c978730 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1508,6 +1508,10 @@  lpfc_initial_fdisc(struct lpfc_vport *vport)
 		ndlp = lpfc_nlp_init(vport, Fabric_DID);
 		if (!ndlp)
 			return 0;
+		/* NPIV is only supported in Fabrics. */
+		ndlp->nlp_type |= NLP_FABRIC;
 		/* Put ndlp onto node list */
 		lpfc_enqueue_node(vport, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index ac05d188f816..f3cf988733c2 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -818,12 +818,13 @@  lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
 	struct lpfc_nodelist *ndlp, *next_ndlp;
 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
 		if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) ||
-			((vport->port_type == LPFC_NPIV_PORT) &&
-			(ndlp->nlp_DID == NameServer_DID)))
+		    ((vport->port_type == LPFC_NPIV_PORT) &&
+		     ((ndlp->nlp_DID == NameServer_DID) ||
+		      (ndlp->nlp_DID == FDMI_DID))))
 			lpfc_unreg_rpi(vport, ndlp);
 		/* Leave Fabric nodes alone on link down */
@@ -1037,9 +1038,7 @@  lpfc_linkup_port(struct lpfc_vport *vport)
 	vport->fc_ns_retry = 0;
-	if (vport->fc_flag & FC_LBIT)
-		lpfc_linkup_cleanup_nodes(vport);
+	lpfc_linkup_cleanup_nodes(vport);
 static int