diff mbox series

[v1,1/8] mpt3sas: Sync time stamp periodically between Driver and FW

Message ID 20201126094311.8686-2-suganath-prabu.subramani@broadcom.com
State New
Headers show
Series mpt3sas: Features to enhance driver debugging. | expand

Commit Message

Suganath Prabu S Nov. 26, 2020, 9:43 a.m. UTC
Issue Description:
In current Driver/FW, the controller timestamp gets updated
with host time during driver load time or when a controller
reset is issued. i.e. when host issues the IOCInit request
message to the HBA FW. This IOCInit message has a field named
'TimeStamp' using which the host updates the controller
timestamp. Over a period, sometimes we may observe controller
time drifting away from host and it is difficult to co-relate
host logs with controller logs with respect to time.
And every time driver cannot issue the IOCInit request message
just for updating the controller timestamp.

Implementation:
Instead of IOCInit, driver sends IO_UNIT_CONTROL Request to
sync time stamp periodically with controller. Timestamp
synchronization interval is specified in 'TimeSyncInterval'
field of Manufacturing Page11 by controller.
TimeSyncInterval - 8 bits
        bits  0-6: Time stamp Synchronization interval value
        bit     7: Time stamp Synchronization interval unit,
                (if this bit is one then Timestamp Synchronization
                interval value is specified in terms of hours else
                Timestamp Synchronization interval value is
                specified in terms of minutes).

Driver sends this IO_UNIT_CONTROL Request message from
watchdog thread (which gets invoked every one second).
Driver keeps tracks of timer using ioc's timestamp_update_count
field. This field value gets incremented whenever the watchdog
thread gets invoked. And whenever this field value is greater
than or equals to the Time stamp Synchronization interval value
then driver sends the IO_UNIT_CONTROL Request message to
controller to update the time stamp and then it resets the
timestamp_update_count field to zero.

Syncing Driver and FW timestamp periodically makes
correlating the FW logs and OS events easier.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reported-by: kernel test robot <lkp@intel.com>
---
v1 Changes:
Fixed sparse warnings.

 drivers/scsi/mpt3sas/mpt3sas_base.c | 93 ++++++++++++++++++++++++++++-
 drivers/scsi/mpt3sas/mpt3sas_base.h | 14 ++++-
 2 files changed, 104 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 93230cd..8538c2d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -596,6 +596,71 @@  static int mpt3sas_remove_dead_ioc_func(void *arg)
 	return 0;
 }
 
+/**
+ * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp.
+ * @ioc: Per Adapter Object
+ *
+ * Return nothing.
+ */
+static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26IoUnitControlRequest_t *mpi_request;
+	Mpi26IoUnitControlReply_t *mpi_reply;
+	u16 smid;
+	ktime_t current_time;
+	u64 TimeStamp = 0;
+	u8 issue_reset = 0;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "scsih_cmd in use %s\n", __func__);
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "Failed obtaining a smid %s\n", __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI26_CTRL_OP_SET_IOC_PARAMETER;
+	mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP;
+	current_time = ktime_get_real();
+	TimeStamp = ktime_to_ms(current_time);
+	mpi_request->Reserved7 = cpu_to_le32(TimeStamp & 0xFFFFFFFF);
+	mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp >> 32);
+	init_completion(&ioc->scsih_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	dinitprintk(ioc, ioc_info(ioc,
+	    "Io Unit Control Sync TimeStamp (sending), @time %lld ms\n",
+	    TimeStamp));
+	wait_for_completion_timeout(&ioc->scsih_cmds.done,
+		MPT3SAS_TIMESYNC_TIMEOUT_SECONDS*HZ);
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->scsih_cmds.status, mpi_request,
+		    sizeof(Mpi2SasIoUnitControlRequest_t)/4, issue_reset);
+		goto issue_host_reset;
+	}
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		dinitprintk(ioc, ioc_info(ioc,
+		    "Io Unit Control sync timestamp (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+		    le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo)));
+	}
+issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+out:
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
 /**
  * _base_fault_reset_work - workq handling ioc fault conditions
  * @work: input argument, used to derive ioc
@@ -720,7 +785,11 @@  _base_fault_reset_work(struct work_struct *work)
 			return; /* don't rearm timer */
 	}
 	ioc->ioc_coredump_loop = 0;
-
+	if (ioc->time_sync_interval &&
+	    ++ioc->timestamp_update_count >= ioc->time_sync_interval) {
+		ioc->timestamp_update_count = 0;
+		_base_sync_drv_fw_timestamp(ioc);
+	}
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
  rearm_timer:
 	if (ioc->fault_reset_work_q)
@@ -744,6 +813,7 @@  mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->fault_reset_work_q)
 		return;
 
+	ioc->timestamp_update_count = 0;
 	/* initialize fault polling */
 
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
@@ -4754,7 +4824,24 @@  _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 		else
 			ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO;
 	}
-
+	ioc->time_sync_interval =
+	    ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_MASK;
+	if (ioc->time_sync_interval) {
+		if (ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_UNIT_MASK)
+			ioc->time_sync_interval =
+			    ioc->time_sync_interval * SECONDS_PER_HOUR;
+		else
+			ioc->time_sync_interval =
+			    ioc->time_sync_interval * SECONDS_PER_MIN;
+		dinitprintk(ioc, ioc_info(ioc,
+		    "Driver-FW TimeSync interval is %d seconds. ManuPg11 TimeSync Unit is in %s\n",
+		    ioc->time_sync_interval, (ioc->manu_pg11.TimeSyncInterval &
+		    MPT3SAS_TIMESYNC_UNIT_MASK) ? "Hour" : "Minute"));
+	} else {
+		if (ioc->is_gen35_ioc)
+			ioc_warn(ioc,
+			    "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n");
+	}
 	mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
 	mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
 	mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
@@ -6466,6 +6553,8 @@  _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 		r = -EIO;
 	}
 
+	/* Reset TimeSync Counter*/
+	ioc->timestamp_update_count = 0;
 	return r;
 }
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 7dab579..cc4815c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -93,6 +93,14 @@ 
 /* CoreDump: Default timeout */
 #define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS	(15) /*15 seconds*/
 #define MPT3SAS_COREDUMP_LOOP_DONE                     (0xFF)
+#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS		(10) /* 10 seconds */
+#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL		(900) /* 15 minutes */
+#define MPT3SAS_TIMESYNC_UNIT_MASK			(0x80) /* bit 7 */
+#define MPT3SAS_TIMESYNC_MASK				(0x7F) /* 0 - 6 bits */
+#define SECONDS_PER_MIN					(60)
+#define SECONDS_PER_HOUR				(3600)
+#define MPT3SAS_COREDUMP_LOOP_DONE			(0xFF)
+#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP		(0x81)
 
 /*
  * Set MPT3SAS_SG_DEPTH value based on user input.
@@ -405,7 +413,7 @@  struct Mpi2ManufacturingPage11_t {
 	u16	HostTraceBufferMaxSizeKB;	/* 50h */
 	u16	HostTraceBufferMinSizeKB;	/* 52h */
 	u8	CoreDumpTOSec;			/* 54h */
-	u8	Reserved8;			/* 55h */
+	u8	TimeSyncInterval;		/* 55h */
 	u16	Reserved9;			/* 56h */
 	__le32	Reserved10;			/* 58h */
 };
@@ -1113,6 +1121,8 @@  typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @cpu_msix_table_sz: table size
  * @total_io_cnt: Gives total IO count, used to load balance the interrupts
  * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state
+ * @timestamp_update_count: Counter to fire timeSync command
+ * time_sync_interval: Time sync interval read from man page 11
  * @high_iops_outstanding: used to load balance the interrupts
  *				within high iops reply queues
  * @msix_load_balance: Enables load balancing of interrupts across
@@ -1308,6 +1318,8 @@  struct MPT3SAS_ADAPTER {
 	MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
 	u32             non_operational_loop;
 	u8              ioc_coredump_loop;
+	u32		timestamp_update_count;
+	u32		time_sync_interval;
 	atomic64_t      total_io_cnt;
 	atomic64_t	high_iops_outstanding;
 	bool            msix_load_balance;