diff mbox series

[6/7] qla2xxx: Enable NVME CONF (BIT_7) when enabling SLER

Message ID 20201223090422.16500-7-njavali@marvell.com
State Superseded
Headers show
Series qla2xxx driver enhancements | expand

Commit Message

Nilesh Javali Dec. 23, 2020, 9:04 a.m. UTC
From: Saurav Kashyap <skashyap@marvell.com>

Enable NVME confirmation bit in PRLI.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index e27359b294d3..8b41cbaf8535 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2378,6 +2378,8 @@  qla24xx_prli_iocb(srb_t *sp, struct logio_entry_24xx *logio)
 			logio->io_parameter[0] =
 				cpu_to_le32(NVME_PRLI_SP_FIRST_BURST);
 		if (sp->vha->flags.nvme2_enabled) {
+			/* Set service parameter BIT_7 for NVME CONF support */
+			logio->io_parameter[0] |= NVME_PRLI_SP_CONF;
 			/* Set service parameter BIT_8 for SLER support */
 			logio->io_parameter[0] |=
 				cpu_to_le32(NVME_PRLI_SP_SLER);