diff mbox series

[v2,06/15] lpfc: Fix FW reset action if IOs are outstanding

Message ID 20210104180240.46824-7-jsmart2021@gmail.com
State New
Headers show
Series lpfc: Update lpfc to revision 12.8.0.7 | expand

Commit Message

James Smart Jan. 4, 2021, 6:02 p.m. UTC
If the port is configured for NVME and has any outstanding IOs when a FW
reset is requesteed, outstanding I/O's are not properly cleaned up. This
causes the fw download request to fail.

Fix by clearing the LPFC_SLI_ACTIVE flag to signify the I/O must be
manually flushed by the driver on port reset.

Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 1f0a62ecfad8..593b175702eb 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1833,6 +1833,16 @@  lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 				"2887 Reset Needed: Attempting Port "
 				"Recovery...\n");
+
+	/* If we are no wait, the HBA has been reset and is not
+	 * functional, thus we should clear LPFC_SLI_ACTIVE flag.
+	 */
+	if (mbx_action == LPFC_MBX_NO_WAIT) {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
 	lpfc_offline_prep(phba, mbx_action);
 	lpfc_sli_flush_io_rings(phba);
 	lpfc_offline(phba);