diff mbox series

[32/39] fas216: Use get_status_byte() to avoid using linux-specific status codes

Message ID 20210423113944.42672-33-hare@suse.de
State New
Headers show
Series SCSI result cleanup, part 2 | expand

Commit Message

Hannes Reinecke April 23, 2021, 11:39 a.m. UTC 
The driver should be using the standard SAM_STAT_ values, and not
the linux-specific ones.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/arm/fas216.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 96db9058d61b..a2337863e3d8 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2060,15 +2060,15 @@  fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
 	 * If the command returned CHECK_CONDITION or COMMAND_TERMINATED
 	 * status, request the sense information.
 	 */
-	if (status_byte(SCpnt->result) == CHECK_CONDITION ||
-	    status_byte(SCpnt->result) == COMMAND_TERMINATED)
+	if (get_status_byte(SCpnt) == SAM_STAT_CHECK_CONDITION ||
+	    get_status_byte(SCpnt) == SAM_STAT_COMMAND_TERMINATED)
 		goto request_sense;
 
 	/*
 	 * If the command did not complete with GOOD status,
 	 * we are all done here.
 	 */
-	if (status_byte(SCpnt->result) != GOOD)
+	if (get_status_byte(SCpnt) != SAM_STAT_GOOD)
 		goto done;
 
 	/*