@@ -562,8 +562,6 @@ static void sym53c8xx_timer(struct timer_list *t)
*/
#define SYM_EH_ABORT 0
#define SYM_EH_DEVICE_RESET 1
-#define SYM_EH_BUS_RESET 2
-#define SYM_EH_HOST_RESET 3
/*
* Generic method for our eh processing.
@@ -583,35 +581,11 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
scmd_printk(KERN_WARNING, cmd, "%s operation started\n", opname);
- /* We may be in an error condition because the PCI bus
- * went down. In this case, we need to wait until the
- * PCI bus is reset, the card is reset, and only then
- * proceed with the scsi error recovery. There's no
- * point in hurrying; take a leisurely wait.
+ /*
+ * Escalate to host reset if the PCI bus went down
*/
-#define WAIT_FOR_PCI_RECOVERY 35
- if (pci_channel_offline(pdev)) {
- int finished_reset = 0;
- init_completion(&eh_done);
- spin_lock_irq(shost->host_lock);
- /* Make sure we didn't race */
- if (pci_channel_offline(pdev)) {
- BUG_ON(sym_data->io_reset);
- sym_data->io_reset = &eh_done;
- } else {
- finished_reset = 1;
- }
- spin_unlock_irq(shost->host_lock);
- if (!finished_reset)
- finished_reset = wait_for_completion_timeout
- (sym_data->io_reset,
- WAIT_FOR_PCI_RECOVERY*HZ);
- spin_lock_irq(shost->host_lock);
- sym_data->io_reset = NULL;
- spin_unlock_irq(shost->host_lock);
- if (!finished_reset)
- return SCSI_FAILED;
- }
+ if (pci_channel_offline(pdev))
+ return SCSI_FAILED;
spin_lock_irq(shost->host_lock);
/* This one is queued in some place -> to wait for completion */
@@ -632,15 +606,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
case SYM_EH_DEVICE_RESET:
sts = sym_reset_scsi_target(np, cmd->device->id);
break;
- case SYM_EH_BUS_RESET:
- sym_reset_scsi_bus(np, 1);
- sts = 0;
- break;
- case SYM_EH_HOST_RESET:
- sym_reset_scsi_bus(np, 0);
- sym_start_up(shost, 1);
- sts = 0;
- break;
default:
break;
}
@@ -682,12 +647,72 @@ static int sym53c8xx_eh_device_reset_handler(struct scsi_cmnd *cmd)
static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
{
- return sym_eh_handler(SYM_EH_BUS_RESET, "BUS RESET", cmd);
+ struct Scsi_Host *shost = cmd->device->host;
+ struct sym_data *sym_data = shost_priv(shost);
+ struct pci_dev *pdev = sym_data->pdev;
+ struct sym_hcb *np = sym_data->ncb;
+
+ scmd_printk(KERN_WARNING, cmd, "BUS RESET operation started\n");
+
+ /*
+ * Escalate to host reset if the PCI bus went down
+ */
+ if (pci_channel_offline(pdev))
+ return SCSI_FAILED;
+
+ spin_lock_irq(shost->host_lock);
+ sym_reset_scsi_bus(np, 1);
+ spin_unlock_irq(shost->host_lock);
+
+ dev_warn(&cmd->device->sdev_gendev, "BUS RESET operation complete.\n");
+ return SCSI_SUCCESS;
}
static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
{
- return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
+ struct Scsi_Host *shost = cmd->device->host;
+ struct sym_data *sym_data = shost_priv(shost);
+ struct pci_dev *pdev = sym_data->pdev;
+ struct sym_hcb *np = sym_data->ncb;
+ struct completion eh_done;
+ int finished_reset = 1;
+
+ shost_printk(KERN_WARNING, shost, "HOST RESET operation started\n");
+
+ /* We may be in an error condition because the PCI bus
+ * went down. In this case, we need to wait until the
+ * PCI bus is reset, the card is reset, and only then
+ * proceed with the scsi error recovery. There's no
+ * point in hurrying; take a leisurely wait.
+ */
+#define WAIT_FOR_PCI_RECOVERY 35
+ if (pci_channel_offline(pdev)) {
+ init_completion(&eh_done);
+ spin_lock_irq(shost->host_lock);
+ /* Make sure we didn't race */
+ if (pci_channel_offline(pdev)) {
+ BUG_ON(sym_data->io_reset);
+ sym_data->io_reset = &eh_done;
+ finished_reset = 0;
+ }
+ spin_unlock_irq(shost->host_lock);
+ if (!finished_reset)
+ finished_reset = wait_for_completion_timeout
+ (sym_data->io_reset,
+ WAIT_FOR_PCI_RECOVERY*HZ);
+ spin_lock_irq(shost->host_lock);
+ sym_data->io_reset = NULL;
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ if (finished_reset) {
+ sym_reset_scsi_bus(np, 0);
+ sym_start_up(shost, 1);
+ }
+
+ shost_printk(KERN_WARNING, shost, "HOST RESET operation %s.\n",
+ finished_reset==1 ? "complete" : "failed");
+ return finished_reset ? SCSI_SUCCESS : SCSI_FAILED;
}
/*
The current handler does both, bus reset and host reset. So split them off into two distinct functions. Signed-off-by: Hannes Reinecke <hare@suse.com> Cc: Matthew Wilcox <willy@infradead.org> --- drivers/scsi/sym53c8xx_2/sym_glue.c | 107 +++++++++++++++++----------- 1 file changed, 66 insertions(+), 41 deletions(-)