diff mbox series

[v2,32/35] scsi: sd: Have scsi-ml retry read_capacity_10 errors

Message ID 20220929025407.119804-33-michael.christie@oracle.com
State New
Headers show
Series Allow scsi_execute users to control retries | expand

Commit Message

Mike Christie Sept. 29, 2022, 2:54 a.m. UTC
This has read_capacity_10 have scsi-ml retry errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/sd.c | 60 +++++++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e7c7992b7bf3..0b6beda2a039 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2409,41 +2409,41 @@  static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int the_result;
-	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
 	sector_t lba;
 	unsigned sector_size;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = 0,
+			/* Device reset might occur several times */
+			.allowed = READ_CAPACITY_RETRIES_ON_RESET,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.result = SCMD_FAILURE_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
-	do {
-		cmd[0] = READ_CAPACITY;
-		memset(&cmd[1], 0, 9);
-		memset(buffer, 0, 8);
-
-		the_result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdp,
-						.cmd = cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = buffer,
-						.buf_len = 8,
-						.sshdr = &sshdr,
-						.timeout = SD_TIMEOUT,
-						.retries = sdkp->max_retries }));
-
-		if (media_not_present(sdkp, &sshdr))
-			return -ENODEV;
+	cmd[0] = READ_CAPACITY;
+	memset(&cmd[1], 0, 9);
+	memset(buffer, 0, 8);
 
-		if (the_result > 0) {
-			sense_valid = scsi_sense_valid(&sshdr);
-			if (sense_valid &&
-			    sshdr.sense_key == UNIT_ATTENTION &&
-			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
-				/* Device reset might occur several times,
-				 * give it one more chance */
-				if (--reset_retries > 0)
-					continue;
-		}
-		retries--;
+	the_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = 8,
+					.sshdr = &sshdr,
+					.timeout = SD_TIMEOUT,
+					.retries = sdkp->max_retries,
+					.failures = failures }));
 
-	} while (the_result && retries);
+	if (media_not_present(sdkp, &sshdr))
+		return -ENODEV;
 
 	if (the_result) {
 		sd_print_result(sdkp, "Read Capacity(10) failed", the_result);