@@ -48,6 +48,8 @@
#define HCI_UNIPRO_APB_CLK_CTRL 0x68
#define UNIPRO_APB_CLK(v, x) (((v) & ~0xF) | ((x) & 0xF))
#define HCI_AXIDMA_RWDATA_BURST_LEN 0x6C
+#define WLU_EN BIT(31)
+#define WLU_BURST_LEN(x) ((x) << 27 | ((x) & 0xF))
#define HCI_GPIO_OUT 0x70
#define HCI_ERR_EN_PA_LAYER 0x78
#define HCI_ERR_EN_DL_LAYER 0x7C
@@ -1925,6 +1927,12 @@ static int gs101_ufs_post_link(struct exynos_ufs *ufs)
{
struct ufs_hba *hba = ufs->hba;
+ /*
+ * Enable Write Line Unique. This field has to be 0x3
+ * to support Write Line Unique transaction on gs101.
+ */
+ hci_writel(ufs, WLU_EN | WLU_BURST_LEN(3), HCI_AXIDMA_RWDATA_BURST_LEN);
+
exynos_ufs_enable_dbg_mode(hba);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_SAVECONFIGTIME), 0x3e8);
exynos_ufs_disable_dbg_mode(hba);
Previously just AXIDMA_RWDATA_BURST_LEN[3:0] field was set to 8. To enable WLU transaction additionally we need to set Write Line Unique enable [31], Write Line Unique Burst Length [30:27] and AXIDMA_RWDATA_BURST_LEN[3:0]. To support WLU transaction, both burth length fields need to be 0x3. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- drivers/ufs/host/ufs-exynos.c | 8 ++++++++ 1 file changed, 8 insertions(+)