diff mbox series

[v2,2/9] nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit

Message ID 20250619111806.3546162-3-yi.zhang@huaweicloud.com
State New
Headers show
Series [v2,1/9] block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits | expand

Commit Message

Zhang Yi June 19, 2025, 11:17 a.m. UTC 
From: Zhang Yi <yi.zhang@huawei.com>

When the device supports the Write Zeroes command and the DEAC bit, it
indicates that the deallocate bit in the Write Zeroes command is
supported, and the bytes read from a deallocated logical block are
zeroes. This means the device supports unmap Write Zeroes operation, so
set the max_hw_wzeroes_unmap_sectors to max_write_zeroes_sectors on the
device's queue limit.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
 drivers/nvme/host/core.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 92697f98c601..90af4a15b696 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2420,22 +2420,24 @@  static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	else
 		lim.write_stream_granularity = 0;
 
-	ret = queue_limits_commit_update(ns->disk->queue, &lim);
-	if (ret) {
-		blk_mq_unfreeze_queue(ns->disk->queue, memflags);
-		goto out;
-	}
-
-	set_capacity_and_notify(ns->disk, capacity);
-
 	/*
 	 * Only set the DEAC bit if the device guarantees that reads from
 	 * deallocated data return zeroes.  While the DEAC bit does not
 	 * require that, it must be a no-op if reads from deallocated data
 	 * do not return zeroes.
 	 */
-	if ((id->dlfeat & 0x7) == 0x1 && (id->dlfeat & (1 << 3)))
+	if ((id->dlfeat & 0x7) == 0x1 && (id->dlfeat & (1 << 3))) {
 		ns->head->features |= NVME_NS_DEAC;
+		lim.max_hw_wzeroes_unmap_sectors = lim.max_write_zeroes_sectors;
+	}
+
+	ret = queue_limits_commit_update(ns->disk->queue, &lim);
+	if (ret) {
+		blk_mq_unfreeze_queue(ns->disk->queue, memflags);
+		goto out;
+	}
+
+	set_capacity_and_notify(ns->disk, capacity);
 	set_disk_ro(ns->disk, nvme_ns_is_readonly(ns, info));
 	set_bit(NVME_NS_READY, &ns->flags);
 	blk_mq_unfreeze_queue(ns->disk->queue, memflags);