mbox series

[printk,v5,00/40] reduce console_lock scope

Message ID 20221116162152.193147-1-john.ogness@linutronix.de
Headers show
Series reduce console_lock scope | expand

Message

John Ogness Nov. 16, 2022, 4:21 p.m. UTC
This is v5 of a series to prepare for threaded/atomic
printing. v4 is here [0]. This series focuses on reducing the
scope of the BKL console_lock. It achieves this by switching to
SRCU and a dedicated mutex for console list iteration and
modification, respectively. The console_lock will no longer
offer this protection.

Also, during the review of v2 it came to our attention that
many console drivers are checking CON_ENABLED to see if they
are registered. Because this flag can change without
unregistering and because this flag does not represent an
atomic point when an (un)registration process is complete,
a new console_is_registered() function is introduced. This
function uses the console_list_lock to synchronize with the
(un)registration process to provide a reliable status.

All users of the console_lock for list iteration have been
modified. For the call sites where the console_lock is still
needed (for other reasons), comments are added to explain
exactly why the console_lock is needed.

All users of CON_ENABLED for registration status have been
modified to use console_is_registered(). Note that there are
still users of CON_ENABLED, but this is for legitimate purposes
about a registered console being able to print.

The base commit for this series is from Paul McKenney's RCU tree
and provides an NMI-safe SRCU implementation [1]. Without the
NMI-safe SRCU implementation, this series is not less safe than
mainline. But we will need the NMI-safe SRCU implementation for
atomic consoles anyway, so we might as well get it in
now. Especially since it _does_ increase the reliability for
mainline in the panic path.

Changes since v4:

printk:

- Introduce console_init_seq() to handle the now rather complex
  procedure to find an appropriate start sequence number for a
  new console upon registration.

- When registering a non-boot console and boot consoles are
  registered, try to flush all the consoles to get the next @seq
  value before falling back to use the @seq of the enabled boot
  console that is furthest behind.

- For console_force_preferred_locked(), make the console the
  head of the console list.

John Ogness

[0] https://lore.kernel.org/lkml/20221114162932.141883-1-john.ogness@linutronix.de
[1] https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/log/?h=srcunmisafe.2022.11.09a

John Ogness (38):
  printk: Prepare for SRCU console list protection
  printk: register_console: use "registered" for variable names
  printk: move @seq initialization to helper
  printk: fix setting first seq for consoles
  um: kmsg_dump: only dump when no output console available
  tty: serial: kgdboc: document console_lock usage
  tty: tty_io: document console_lock usage
  proc: consoles: document console_lock usage
  printk: introduce console_list_lock
  console: introduce wrappers to read/write console flags
  um: kmsg_dumper: use srcu console list iterator
  kdb: use srcu console list iterator
  printk: console_flush_all: use srcu console list iterator
  printk: __pr_flush: use srcu console list iterator
  printk: console_is_usable: use console_srcu_read_flags
  printk: console_unblank: use srcu console list iterator
  printk: console_flush_on_panic: use srcu console list iterator
  printk: console_device: use srcu console list iterator
  console: introduce console_is_registered()
  serial_core: replace uart_console_enabled() with
    uart_console_registered()
  tty: nfcon: use console_is_registered()
  efi: earlycon: use console_is_registered()
  tty: hvc: use console_is_registered()
  tty: serial: earlycon: use console_is_registered()
  tty: serial: pic32_uart: use console_is_registered()
  tty: serial: samsung_tty: use console_is_registered()
  tty: serial: xilinx_uartps: use console_is_registered()
  usb: early: xhci-dbc: use console_is_registered()
  netconsole: avoid CON_ENABLED misuse to track registration
  printk, xen: fbfront: create/use safe function for forcing preferred
  tty: tty_io: use console_list_lock for list synchronization
  proc: consoles: use console_list_lock for list iteration
  tty: serial: kgdboc: use srcu console list iterator
  tty: serial: kgdboc: use console_list_lock for list traversal
  tty: serial: kgdboc: synchronize tty_find_polling_driver() and
    register_console()
  tty: serial: kgdboc: use console_list_lock to trap exit
  printk: relieve console_lock of list synchronization duties
  tty: serial: sh-sci: use setup() callback for early console

Thomas Gleixner (2):
  serial: kgdboc: Lock console list in probe function
  printk: Convert console_drivers list to hlist

 .clang-format                       |   1 +
 arch/m68k/emu/nfcon.c               |   9 +-
 arch/um/kernel/kmsg_dump.c          |  24 +-
 drivers/firmware/efi/earlycon.c     |   8 +-
 drivers/net/netconsole.c            |  21 +-
 drivers/tty/hvc/hvc_console.c       |   4 +-
 drivers/tty/serial/8250/8250_core.c |   2 +-
 drivers/tty/serial/earlycon.c       |   4 +-
 drivers/tty/serial/kgdboc.c         |  46 ++-
 drivers/tty/serial/pic32_uart.c     |   4 +-
 drivers/tty/serial/samsung_tty.c    |   2 +-
 drivers/tty/serial/serial_core.c    |  14 +-
 drivers/tty/serial/sh-sci.c         |  20 +-
 drivers/tty/serial/xilinx_uartps.c  |   2 +-
 drivers/tty/tty_io.c                |  18 +-
 drivers/usb/early/xhci-dbc.c        |   2 +-
 drivers/video/fbdev/xen-fbfront.c   |  12 +-
 fs/proc/consoles.c                  |  21 +-
 include/linux/console.h             | 129 +++++++-
 include/linux/serial_core.h         |  10 +-
 kernel/debug/kdb/kdb_io.c           |  18 +-
 kernel/printk/printk.c              | 493 +++++++++++++++++++++-------
 22 files changed, 680 insertions(+), 184 deletions(-)


base-commit: f733615e39aa2d6ddeef33b7b2c9aa6a5a2c2785

Comments

Greg Kroah-Hartman Nov. 22, 2022, 4:43 p.m. UTC | #1
On Wed, Nov 16, 2022 at 05:27:12PM +0106, John Ogness wrote:
> This is v5 of a series to prepare for threaded/atomic
> printing. v4 is here [0]. This series focuses on reducing the
> scope of the BKL console_lock. It achieves this by switching to
> SRCU and a dedicated mutex for console list iteration and
> modification, respectively. The console_lock will no longer
> offer this protection.
> 
> Also, during the review of v2 it came to our attention that
> many console drivers are checking CON_ENABLED to see if they
> are registered. Because this flag can change without
> unregistering and because this flag does not represent an
> atomic point when an (un)registration process is complete,
> a new console_is_registered() function is introduced. This
> function uses the console_list_lock to synchronize with the
> (un)registration process to provide a reliable status.
> 
> All users of the console_lock for list iteration have been
> modified. For the call sites where the console_lock is still
> needed (for other reasons), comments are added to explain
> exactly why the console_lock is needed.
> 
> All users of CON_ENABLED for registration status have been
> modified to use console_is_registered(). Note that there are
> still users of CON_ENABLED, but this is for legitimate purposes
> about a registered console being able to print.
> 
> The base commit for this series is from Paul McKenney's RCU tree
> and provides an NMI-safe SRCU implementation [1]. Without the
> NMI-safe SRCU implementation, this series is not less safe than
> mainline. But we will need the NMI-safe SRCU implementation for
> atomic consoles anyway, so we might as well get it in
> now. Especially since it _does_ increase the reliability for
> mainline in the panic path.
> 
> Changes since v4:
> 
> printk:
> 
> - Introduce console_init_seq() to handle the now rather complex
>   procedure to find an appropriate start sequence number for a
>   new console upon registration.
> 
> - When registering a non-boot console and boot consoles are
>   registered, try to flush all the consoles to get the next @seq
>   value before falling back to use the @seq of the enabled boot
>   console that is furthest behind.
> 
> - For console_force_preferred_locked(), make the console the
>   head of the console list.
> 


Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>