mbox series

[0/5] Add interconnects to QUPs on SM8250

Message ID 20230703-topic-8250_qup_icc-v1-0-fea39aa07525@linaro.org
Headers show
Series Add interconnects to QUPs on SM8250 | expand

Message

Konrad Dybcio July 3, 2023, 1:31 p.m. UTC 
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (5):
      dt-bindings: spi: spi-geni-qcom: Allow no qup-core icc path
      dt-bindings: serial: geni-qcom: Allow no qup-core icc path
      dt-bindings: i2c: qcom,i2c-geni: Allow no qup-core icc path
      soc: qcom: geni-se: Allow any combination of icc paths
      arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs

 .../bindings/i2c/qcom,i2c-geni-qcom.yaml           |  27 ++--
 .../bindings/serial/qcom,serial-geni-qcom.yaml     |  26 ++--
 .../bindings/spi/qcom,spi-geni-qcom.yaml           |  15 ++-
 arch/arm64/boot/dts/qcom/sm8250.dtsi               | 150 +++++++++++++++++++++
 drivers/soc/qcom/qcom-geni-se.c                    |   9 +-
 5 files changed, 204 insertions(+), 23 deletions(-)
---
base-commit: 296d53d8f84ce50ffaee7d575487058c8d437335
change-id: 20230703-topic-8250_qup_icc-61768a34c7ec

Best regards,