diff mbox series

[03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT

Message ID 01cf1bbae5949cbceb2768f2044377bc2479986b.1732030972.git.Ryan.Wanner@microchip.com
State New
Headers show
Series Add support for SAMA7D65 | expand

Commit Message

Ryan Wanner Nov. 19, 2024, 4:40 p.m. UTC 
From: Dharma Balasubiramani <dharma.b@microchip.com>

Add SAMA7D65 RAM controller, PIT64 DT bindings.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
---
 .../devicetree/bindings/arm/atmel-sysregs.txt      | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 76e2b7978250..93c2a5a341f3 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -13,6 +13,7 @@  PIT Timer required properties:
 PIT64B Timer required properties:
 - compatible: Should be "microchip,sam9x60-pit64b" or
 			"microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"
+			"microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for PIT64B timer
 - clocks: Should contain the available clock sources for PIT64B timer.
@@ -27,12 +28,13 @@  Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
-			"atmel,at91sam9260-sdramc",
-			"atmel,at91sam9g45-ddramc",
-			"atmel,sama5d3-ddramc",
-			"microchip,sam9x60-ddramc",
-			"microchip,sama7g5-uddrc",
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" or
+			"atmel,at91sam9260-sdramc" or
+			"atmel,at91sam9g45-ddramc" or
+			"atmel,sama5d3-ddramc" or
+			"microchip,sam9x60-ddramc" or
+			"microchip,sama7g5-uddrc" or
+			"microchip,sama7d65-uddrc","microchip,sama7g5-uddrc" or
 			"microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc".
 - reg: Should contain registers location and length