From patchwork Mon Dec 7 08:47:27 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Akash Asthana X-Patchwork-Id: 339452 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 488BEC1B0D9 for ; Mon, 7 Dec 2020 08:49:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1828E22A85 for ; Mon, 7 Dec 2020 08:49:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726160AbgLGItG (ORCPT ); Mon, 7 Dec 2020 03:49:06 -0500 Received: from so254-31.mailgun.net ([198.61.254.31]:32878 "EHLO so254-31.mailgun.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726441AbgLGItG (ORCPT ); Mon, 7 Dec 2020 03:49:06 -0500 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1607330919; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=BNWkd1f8d84aVoPvkJm84zWx+BWBng++SL+Kc5t6eHQ=; b=WQVSsyZJ9Hi+uWvu5oC5iJyH/IRfpLWWQt78/NQpor565c7V5sHgsaqxc5yYUN1X1+CH6Uhl cqOsIsqW75/IXY795fcsNknW4mxkw2RqLgCu4mdHDA8fqFKgJj9gQeZ7vsKaffN0mFgKBKi6 KxS7/EgayklX0XCnWX9QabnnWP0= X-Mailgun-Sending-Ip: 198.61.254.31 X-Mailgun-Sid: WyIzZmY0MiIsICJsaW51eC1zZXJpYWxAdmdlci5rZXJuZWwub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by smtp-out-n02.prod.us-east-1.postgun.com with SMTP id 5fcdec4baac94550972be426 (version=TLS1.2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256); Mon, 07 Dec 2020 08:48:11 GMT Sender: akashast=codeaurora.org@mg.codeaurora.org Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 0D4FAC433ED; Mon, 7 Dec 2020 08:48:11 +0000 (UTC) Received: from akashast-linux.qualcomm.com (unknown [202.46.22.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: akashast) by smtp.codeaurora.org (Postfix) with ESMTPSA id 0928EC433C6; Mon, 7 Dec 2020 08:48:04 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 0928EC433C6 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=fail smtp.mailfrom=akashast@codeaurora.org From: Akash Asthana To: gregkh@linuxfoundation.org, bjorn.andersson@linaro.org Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, mka@chromium.org, dianders@chromium.org, linux-kernel@vger.kernel.org, saravanak@google.com, Akash Asthana Subject: [PATCH 3/3] Serial: Separate out earlycon support Date: Mon, 7 Dec 2020 14:17:27 +0530 Message-Id: <1607330847-15522-4-git-send-email-akashast@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1607330847-15522-1-git-send-email-akashast@codeaurora.org> References: <1607330847-15522-1-git-send-email-akashast@codeaurora.org> Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org Separate out earlycon support from serial driver and remove it's dependency on QUP wrapper driver. This enable us to manage earlycon independently and we can re-use the same earlycon driver for android project which currently uses downstream version of QUP drivers. Signed-off-by: Akash Asthana --- drivers/tty/serial/Kconfig | 9 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/qcom_geni_earlycon.c | 649 ++++++++++++++++++++++++++++++++ drivers/tty/serial/qcom_geni_serial.c | 97 ----- 4 files changed, 659 insertions(+), 97 deletions(-) create mode 100644 drivers/tty/serial/qcom_geni_earlycon.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3409e0b..393a017 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -957,6 +957,15 @@ config SERIAL_QCOM_GENI depends on QCOM_GENI_SE select SERIAL_CORE +config SERIAL_QCOM_GENI_EARLYCON + bool "QCOM GENI Early Console support" + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Serial early console driver for Qualcomm Technologies Inc's GENI + based QUP hardware. + config SERIAL_QCOM_GENI_CONSOLE bool "QCOM GENI Serial Console support" depends on SERIAL_QCOM_GENI diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index b85d53f..4f9c318 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_QCOM_GENI_EARLYCON) += qcom_geni_earlycon.o obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o diff --git a/drivers/tty/serial/qcom_geni_earlycon.c b/drivers/tty/serial/qcom_geni_earlycon.c new file mode 100644 index 0000000..847cc7b --- /dev/null +++ b/drivers/tty/serial/qcom_geni_earlycon.c @@ -0,0 +1,649 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020, The Linux foundation. All rights reserved. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Common SE registers */ +#define GENI_FORCE_DEFAULT_REG 0x20 +#define GENI_FW_REVISION_RO 0x68 +#define SE_GENI_DMA_MODE_EN 0x258 +#define SE_GENI_M_CMD0 0x600 +#define SE_GENI_M_CMD_CTRL_REG 0x604 +#define SE_GENI_M_IRQ_STATUS 0x610 +#define SE_GENI_M_IRQ_EN 0x614 +#define SE_GENI_M_IRQ_CLEAR 0x618 +#define SE_GENI_S_CMD0 0x630 +#define SE_GENI_S_CMD_CTRL_REG 0x634 +#define SE_GENI_S_IRQ_STATUS 0x640 +#define SE_GENI_S_IRQ_EN 0x644 +#define SE_GENI_S_IRQ_CLEAR 0x648 +#define SE_GENI_TX_FIFOn 0x700 +#define SE_GENI_RX_FIFOn 0x780 +#define SE_GENI_TX_FIFO_STATUS 0x800 +#define SE_GENI_RX_FIFO_STATUS 0x804 +#define SE_GENI_TX_WATERMARK_REG 0x80c +#define SE_GENI_RX_WATERMARK_REG 0x810 +#define SE_GENI_RX_RFR_WATERMARK_REG 0x814 +#define SE_DMA_TX_IRQ_CLR 0xc44 +#define SE_DMA_RX_IRQ_CLR 0xd44 + +/* GENI_FORCE_DEFAULT_REG fields */ +#define FORCE_DEFAULT BIT(0) + +/* GENI_FW_REVISION_RO fields */ +#define FW_REV_PROTOCOL_MSK GENMASK(15, 8) +#define FW_REV_PROTOCOL_SHFT 8 + +/* SE_GENI_DMA_MODE_EN */ +#define GENI_DMA_MODE_EN BIT(0) + +/* GENI_M_CMD0 fields */ +#define M_OPCODE_MSK GENMASK(31, 27) +#define M_OPCODE_SHFT 27 +#define M_PARAMS_MSK GENMASK(26, 0) + +/* GENI_M_CMD_CTRL_REG */ +#define M_GENI_CMD_CANCEL BIT(2) +#define M_GENI_CMD_ABORT BIT(1) +#define M_GENI_DISABLE BIT(0) + +/* GENI_S_CMD0 fields */ +#define S_OPCODE_MSK GENMASK(31, 27) +#define S_OPCODE_SHFT 27 +#define S_PARAMS_MSK GENMASK(26, 0) + +/* GENI_S_CMD_CTRL_REG */ +#define S_GENI_CMD_CANCEL BIT(2) +#define S_GENI_CMD_ABORT BIT(1) +#define S_GENI_DISABLE BIT(0) + +/* GENI_M_IRQ_EN fields */ +#define M_CMD_DONE_EN BIT(0) +#define M_CMD_OVERRUN_EN BIT(1) +#define M_ILLEGAL_CMD_EN BIT(2) +#define M_CMD_FAILURE_EN BIT(3) +#define M_CMD_CANCEL_EN BIT(4) +#define M_CMD_ABORT_EN BIT(5) +#define M_TIMESTAMP_EN BIT(6) +#define M_RX_IRQ_EN BIT(7) +#define M_GP_SYNC_IRQ_0_EN BIT(8) +#define M_GP_IRQ_0_EN BIT(9) +#define M_GP_IRQ_1_EN BIT(10) +#define M_GP_IRQ_2_EN BIT(11) +#define M_GP_IRQ_3_EN BIT(12) +#define M_GP_IRQ_4_EN BIT(13) +#define M_GP_IRQ_5_EN BIT(14) +#define M_IO_DATA_DEASSERT_EN BIT(22) +#define M_IO_DATA_ASSERT_EN BIT(23) +#define M_RX_FIFO_RD_ERR_EN BIT(24) +#define M_RX_FIFO_WR_ERR_EN BIT(25) +#define M_RX_FIFO_WATERMARK_EN BIT(26) +#define M_RX_FIFO_LAST_EN BIT(27) +#define M_TX_FIFO_RD_ERR_EN BIT(28) +#define M_TX_FIFO_WR_ERR_EN BIT(29) +#define M_TX_FIFO_WATERMARK_EN BIT(30) +#define M_SEC_IRQ_EN BIT(31) +#define M_COMMON_GENI_M_IRQ_EN (GENMASK(6, 1) | \ + M_IO_DATA_DEASSERT_EN | \ + M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \ + M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \ + M_TX_FIFO_WR_ERR_EN) + +/* GENI_S_IRQ_EN fields */ +#define S_CMD_DONE_EN BIT(0) +#define S_CMD_OVERRUN_EN BIT(1) +#define S_ILLEGAL_CMD_EN BIT(2) +#define S_CMD_FAILURE_EN BIT(3) +#define S_CMD_CANCEL_EN BIT(4) +#define S_CMD_ABORT_EN BIT(5) +#define S_GP_SYNC_IRQ_0_EN BIT(8) +#define S_GP_IRQ_0_EN BIT(9) +#define S_GP_IRQ_1_EN BIT(10) +#define S_GP_IRQ_2_EN BIT(11) +#define S_GP_IRQ_3_EN BIT(12) +#define S_GP_IRQ_4_EN BIT(13) +#define S_GP_IRQ_5_EN BIT(14) +#define S_IO_DATA_DEASSERT_EN BIT(22) +#define S_IO_DATA_ASSERT_EN BIT(23) +#define S_RX_FIFO_RD_ERR_EN BIT(24) +#define S_RX_FIFO_WR_ERR_EN BIT(25) +#define S_RX_FIFO_WATERMARK_EN BIT(26) +#define S_RX_FIFO_LAST_EN BIT(27) +#define S_COMMON_GENI_S_IRQ_EN (GENMASK(5, 1) | GENMASK(13, 9) | \ + S_RX_FIFO_RD_ERR_EN | S_RX_FIFO_WR_ERR_EN) + +/* GENI_RX_FIFO_STATUS fields */ +#define RX_LAST BIT(31) +#define RX_LAST_BYTE_VALID_MSK GENMASK(30, 28) +#define RX_LAST_BYTE_VALID_SHFT 28 +#define RX_FIFO_WC_MSK GENMASK(24, 0) + +/* UART specific GENI registers */ +#define SE_UART_TX_TRANS_CFG 0x25c +#define SE_UART_TX_WORD_LEN 0x268 +#define SE_UART_TX_STOP_BIT_LEN 0x26c +#define SE_UART_TX_TRANS_LEN 0x270 +#define SE_UART_RX_TRANS_CFG 0x280 +#define SE_UART_RX_WORD_LEN 0x28c +#define SE_UART_TX_PARITY_CFG 0x2a4 +#define SE_UART_RX_PARITY_CFG 0x2a8 + +/* SE_UART_TRANS_CFG */ +#define UART_TX_PAR_EN BIT(0) +#define UART_CTS_MASK BIT(1) + +/* SE_UART_TX_WORD_LEN */ +#define TX_WORD_LEN_MSK GENMASK(9, 0) + +/* SE_UART_TX_STOP_BIT_LEN */ +#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0) +#define TX_STOP_BIT_LEN_1 0 +#define TX_STOP_BIT_LEN_1_5 1 +#define TX_STOP_BIT_LEN_2 2 + +/* SE_UART_TX_TRANS_LEN */ +#define TX_TRANS_LEN_MSK GENMASK(23, 0) + +/* SE_UART_RX_TRANS_CFG */ +#define UART_RX_INS_STATUS_BIT BIT(2) +#define UART_RX_PAR_EN BIT(3) + +/* SE_UART_RX_WORD_LEN */ +#define RX_WORD_LEN_MASK GENMASK(9, 0) + +/* Common SE registers */ +#define GENI_OUTPUT_CTRL 0x24 +#define GENI_CGC_CTRL 0x28 +#define SE_GENI_BYTE_GRAN 0x254 +#define SE_GENI_TX_PACKING_CFG0 0x260 +#define SE_GENI_TX_PACKING_CFG1 0x264 +#define SE_GENI_RX_PACKING_CFG0 0x284 +#define SE_GENI_RX_PACKING_CFG1 0x288 +#define SE_GSI_EVENT_EN 0xe18 +#define SE_IRQ_EN 0xe1c +#define SE_DMA_GENERAL_CFG 0xe30 + +/* GENI_OUTPUT_CTRL fields */ +#define DEFAULT_IO_OUTPUT_CTRL_MSK GENMASK(6, 0) + +/* GENI_CGC_CTRL fields */ +#define CFG_AHB_CLK_CGC_ON BIT(0) +#define CFG_AHB_WR_ACLK_CGC_ON BIT(1) +#define DATA_AHB_CLK_CGC_ON BIT(2) +#define SCLK_CGC_ON BIT(3) +#define TX_CLK_CGC_ON BIT(4) +#define RX_CLK_CGC_ON BIT(5) +#define EXT_CLK_CGC_ON BIT(6) +#define PROG_RAM_HCLK_OFF BIT(8) +#define PROG_RAM_SCLK_OFF BIT(9) +#define DEFAULT_CGC_EN GENMASK(6, 0) + +/* SE_GSI_EVENT_EN fields */ +#define DMA_RX_EVENT_EN BIT(0) +#define DMA_TX_EVENT_EN BIT(1) +#define GENI_M_EVENT_EN BIT(2) +#define GENI_S_EVENT_EN BIT(3) + +/* SE_IRQ_EN fields */ +#define DMA_RX_IRQ_EN BIT(0) +#define DMA_TX_IRQ_EN BIT(1) +#define GENI_M_IRQ_EN BIT(2) +#define GENI_S_IRQ_EN BIT(3) + +/* SE_DMA_GENERAL_CFG */ +#define DMA_RX_CLK_CGC_ON BIT(0) +#define DMA_TX_CLK_CGC_ON BIT(1) +#define DMA_AHB_SLV_CFG_ON BIT(2) +#define AHB_SEC_SLV_CLK_CGC_ON BIT(3) +#define DUMMY_RX_NON_BUFFERABLE BIT(4) +#define RX_DMA_ZERO_PADDING_EN BIT(5) +#define RX_DMA_IRQ_DELAY_MSK GENMASK(8, 6) + +/* UART M_CMD OP codes */ +#define UART_START_TX 0x1 +#define UART_START_BREAK 0x4 +#define UART_STOP_BREAK 0x5 + +/* UART S_CMD OP codes */ +#define UART_START_READ 0x1 +#define UART_PARAM 0x1 + +#define DEF_FIFO_DEPTH_WORDS 16 +#define DEF_TX_WM 2 +#define DEF_FIFO_WIDTH_BITS 32 + +/* We always configure 4 bytes per FIFO word */ +#define BYTES_PER_FIFO_WORD 4 + +#define UART_PROTOCOL 2 + +#define NUM_PACKING_VECTORS 4 +#define PACKING_START_SHIFT 5 +#define PACKING_DIR_SHIFT 4 +#define PACKING_LEN_SHIFT 1 +#define PACKING_STOP_BIT BIT(0) +#define PACKING_VECTOR_SHIFT 10 + +struct geni_earlycon_private_data { + u32 poll_cached_bytes; + unsigned int poll_cached_bytes_cnt; + + u32 write_cached_bytes; + unsigned int write_cached_bytes_cnt; +}; + +struct qcom_geni_serial_port { + struct uart_port uport; + unsigned int baud; + + struct geni_earlycon_private_data private_data; +}; + +static u32 qcom_geni_earlycon_get_proto(void __iomem *base) +{ + u32 val; + + val = readl(base + GENI_FW_REVISION_RO); + + return (val & FW_REV_PROTOCOL_MSK) >> FW_REV_PROTOCOL_SHFT; +} + +static void qcom_geni_earlycon_config_packing(void __iomem *base, int bpw, + int pack_words, bool msb_to_lsb, + bool tx_cfg, bool rx_cfg) +{ + u32 cfg0, cfg1, cfg[NUM_PACKING_VECTORS] = {0}; + int len; + int temp_bpw = bpw; + int idx_start = msb_to_lsb ? bpw - 1 : 0; + int idx = idx_start; + int idx_delta = msb_to_lsb ? -BITS_PER_BYTE : BITS_PER_BYTE; + int ceil_bpw = ALIGN(bpw, BITS_PER_BYTE); + int iter = (ceil_bpw * pack_words) / BITS_PER_BYTE; + int i; + + if (iter <= 0 || iter > NUM_PACKING_VECTORS) + return; + + for (i = 0; i < iter; i++) { + len = min_t(int, temp_bpw, BITS_PER_BYTE) - 1; + cfg[i] = idx << PACKING_START_SHIFT; + cfg[i] |= msb_to_lsb << PACKING_DIR_SHIFT; + cfg[i] |= len << PACKING_LEN_SHIFT; + + if (temp_bpw <= BITS_PER_BYTE) { + idx = ((i + 1) * BITS_PER_BYTE) + idx_start; + temp_bpw = bpw; + } else { + idx = idx + idx_delta; + temp_bpw = temp_bpw - BITS_PER_BYTE; + } + } + cfg[iter - 1] |= PACKING_STOP_BIT; + cfg0 = cfg[0] | (cfg[1] << PACKING_VECTOR_SHIFT); + cfg1 = cfg[2] | (cfg[3] << PACKING_VECTOR_SHIFT); + + if (tx_cfg) { + writel(cfg0, base + SE_GENI_TX_PACKING_CFG0); + writel(cfg1, base + SE_GENI_TX_PACKING_CFG1); + } + if (rx_cfg) { + writel(cfg0, base + SE_GENI_RX_PACKING_CFG0); + writel(cfg1, base + SE_GENI_RX_PACKING_CFG1); + } + + /* + * Number of protocol words in each FIFO entry + * 0 - 4x8, four words in each entry, max word size of 8 bits + * 1 - 2x16, two words in each entry, max word size of 16 bits + * 2 - 1x32, one word in each entry, max word size of 32 bits + * 3 - undefined + */ + if (pack_words || bpw == 32) + writel(bpw / 16, base + SE_GENI_BYTE_GRAN); +} + +static void qcom_geni_earlycon_io_set_mode(void __iomem *base) +{ + u32 val; + + val = readl_relaxed(base + SE_IRQ_EN); + val |= GENI_M_IRQ_EN | GENI_S_IRQ_EN; + val |= DMA_TX_IRQ_EN | DMA_RX_IRQ_EN; + writel_relaxed(val, base + SE_IRQ_EN); + + val = readl_relaxed(base + SE_GENI_DMA_MODE_EN); + val &= ~GENI_DMA_MODE_EN; + writel_relaxed(val, base + SE_GENI_DMA_MODE_EN); + + writel_relaxed(0, base + SE_GSI_EVENT_EN); +} + +static void qcom_geni_earlycon_io_init(void __iomem *base) +{ + u32 val; + + val = readl_relaxed(base + GENI_CGC_CTRL); + val |= DEFAULT_CGC_EN; + writel_relaxed(val, base + GENI_CGC_CTRL); + + val = readl_relaxed(base + SE_DMA_GENERAL_CFG); + val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CFG_ON; + val |= DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON; + writel_relaxed(val, base + SE_DMA_GENERAL_CFG); + + writel_relaxed(DEFAULT_IO_OUTPUT_CTRL_MSK, base + GENI_OUTPUT_CTRL); + writel_relaxed(FORCE_DEFAULT, base + GENI_FORCE_DEFAULT_REG); +} + +static void qcom_geni_earlycon_irq_clear(void __iomem *base) +{ + writel_relaxed(0, base + SE_GSI_EVENT_EN); + writel_relaxed(0xffffffff, base + SE_GENI_M_IRQ_CLEAR); + writel_relaxed(0xffffffff, base + SE_GENI_S_IRQ_CLEAR); + writel_relaxed(0xffffffff, base + SE_DMA_TX_IRQ_CLR); + writel_relaxed(0xffffffff, base + SE_DMA_RX_IRQ_CLR); + writel_relaxed(0xffffffff, base + SE_IRQ_EN); +} + +static void qcom_geni_earlycon_init(void __iomem *base, u32 rx_wm, u32 rx_rfr) +{ + u32 val; + + qcom_geni_earlycon_irq_clear(base); + qcom_geni_earlycon_io_init(base); + qcom_geni_earlycon_io_set_mode(base); + + writel_relaxed(rx_wm, base + SE_GENI_RX_WATERMARK_REG); + writel_relaxed(rx_rfr, base + SE_GENI_RX_RFR_WATERMARK_REG); + + val = readl_relaxed(base + SE_GENI_M_IRQ_EN); + val |= M_COMMON_GENI_M_IRQ_EN; + writel_relaxed(val, base + SE_GENI_M_IRQ_EN); + + val = readl_relaxed(base + SE_GENI_S_IRQ_EN); + val |= S_COMMON_GENI_S_IRQ_EN; + writel_relaxed(val, base + SE_GENI_S_IRQ_EN); +} + +static bool qcom_geni_earlycon_poll_bit(struct uart_port *uport, + int offset, int field, bool set) +{ + u32 reg; + unsigned long timeout_us = 20000; + + /* + * Use custom implementation instead of readl_poll_atomic since ktimer + * is not ready at the time of early console. + */ + while (timeout_us) { + reg = readl(uport->membase + offset); + if ((bool)(reg & field) == set) + return true; + udelay(10); + timeout_us -= 10; + } + return false; +} + +static void qcom_geni_earlycon_setup_tx(struct uart_port *uport, u32 xmit_size) +{ + u32 m_cmd; + + writel(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN); + m_cmd = UART_START_TX << M_OPCODE_SHFT; + writel(m_cmd, uport->membase + SE_GENI_M_CMD0); +} + +static void qcom_geni_earlycon_poll_tx_done(struct uart_port *uport) +{ + int done; + u32 irq_clear = M_CMD_DONE_EN; + + done = qcom_geni_earlycon_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_DONE_EN, true); + if (!done) { + writel(M_GENI_CMD_ABORT, uport->membase + + SE_GENI_M_CMD_CTRL_REG); + irq_clear |= M_CMD_ABORT_EN; + qcom_geni_earlycon_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + } + writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_earlycon_abort_rx(struct uart_port *uport) +{ + u32 irq_clear = S_CMD_DONE_EN | S_CMD_ABORT_EN; + + writel(S_GENI_CMD_ABORT, uport->membase + SE_GENI_S_CMD_CTRL_REG); + qcom_geni_earlycon_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG, + S_GENI_CMD_ABORT, false); + writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR); + writel(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG); +} + +static void qcom_geni_earlycon_select_fifo_mode(void __iomem *base) +{ + u32 val; + + val = readl_relaxed(base + SE_GENI_DMA_MODE_EN); + val &= ~GENI_DMA_MODE_EN; + writel_relaxed(val, base + SE_GENI_DMA_MODE_EN); +} + +#ifdef CONFIG_CONSOLE_POLL + +static void geni_se_setup_s_cmd(void __iomem *base, u32 cmd, u32 params) +{ + u32 s_cmd; + + s_cmd = readl(base + SE_GENI_S_CMD0); + s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK); + s_cmd |= (cmd << S_OPCODE_SHFT); + s_cmd |= (params & S_PARAMS_MSK); + writel(s_cmd, base + SE_GENI_S_CMD0); +} + +static int qcom_geni_earlycon_get_char(struct uart_port *uport) +{ + struct geni_earlycon_private_data *private_data = uport->private_data; + u32 status; + u32 word_cnt; + int ret; + + if (!private_data->poll_cached_bytes_cnt) { + status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_M_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + if (!word_cnt) + return NO_POLL_CHAR; + + if (word_cnt == 1 && (status & RX_LAST)) + private_data->poll_cached_bytes_cnt = + (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; + else + private_data->poll_cached_bytes_cnt = 4; + + private_data->poll_cached_bytes = + readl(uport->membase + SE_GENI_RX_FIFOn); + } + + private_data->poll_cached_bytes_cnt--; + ret = private_data->poll_cached_bytes & 0xff; + private_data->poll_cached_bytes >>= 8; + + return ret; +} +#endif + +static void qcom_geni_serial_wr_char(struct uart_port *uport, int ch) +{ + struct geni_earlycon_private_data *private_data = uport->private_data; + + private_data->write_cached_bytes = + (private_data->write_cached_bytes >> 8) | (ch << 24); + private_data->write_cached_bytes_cnt++; + + if (private_data->write_cached_bytes_cnt == BYTES_PER_FIFO_WORD) { + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } +} + +static void qcom_geni_earlycon_write(struct console *con, const char *s, + unsigned int count) +{ + struct earlycon_device *dev = con->data; + struct uart_port *uport = &dev->port; + struct geni_earlycon_private_data *private_data = uport->private_data; + + int i; + u32 bytes_to_send = count; + + for (i = 0; i < count; i++) { + /* + * uart_console_write() adds a carriage return for each newline. + * Account for additional bytes to be written. + */ + if (s[i] == '\n') + bytes_to_send++; + } + + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + qcom_geni_earlycon_setup_tx(uport, bytes_to_send); + for (i = 0; i < count; ) { + size_t chars_to_write = 0; + size_t avail = DEF_FIFO_DEPTH_WORDS - DEF_TX_WM; + + /* + * If the WM bit never set, then the Tx state machine is not + * in a valid state, so break, cancel/abort any existing + * command. Unfortunately the current data being written is + * lost. + */ + if (!qcom_geni_earlycon_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_TX_FIFO_WATERMARK_EN, true)) + break; + chars_to_write = min_t(size_t, count - i, avail / 2); + uart_console_write(uport, s + i, chars_to_write, + qcom_geni_serial_wr_char); + writel(M_TX_FIFO_WATERMARK_EN, uport->membase + + SE_GENI_M_IRQ_CLEAR); + i += chars_to_write; + } + + if (private_data->write_cached_bytes_cnt) { + private_data->write_cached_bytes >>= BITS_PER_BYTE * + (BYTES_PER_FIFO_WORD - private_data->write_cached_bytes_cnt); + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } + + qcom_geni_earlycon_poll_tx_done(uport); +} + +#ifdef CONFIG_CONSOLE_POLL +static int qcom_geni_earlycon_read(struct console *con, char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + struct uart_port *uport = &dev->port; + int num_read = 0; + int ch; + + while (num_read < n) { + ch = qcom_geni_earlycon_get_char(uport); + if (ch == NO_POLL_CHAR) + break; + s[num_read++] = ch; + } + + return num_read; +} + +static void __init qcom_geni_earlycon_enable_read(void __iomem *base, + struct console *con) +{ + geni_se_setup_s_cmd(base, UART_START_READ, 0); + con->read = qcom_geni_earlycon_read; +} +#else +static inline void qcom_geni_earlycon_enable_read(void __iomem *base, + struct console *con) { } +#endif + +static struct geni_earlycon_private_data earlycon_private_data; + +static int __init qcom_geni_earlycon_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *uport = &dev->port; + u32 tx_trans_cfg; + u32 tx_parity_cfg = 0; /* Disable Tx Parity */ + u32 rx_trans_cfg = 0; + u32 rx_parity_cfg = 0; /* Disable Rx Parity */ + u32 stop_bit_len = 0; /* Default stop bit length - 1 bit */ + u32 bits_per_char; + + if (!uport->membase) + return -EINVAL; + + uport->private_data = &earlycon_private_data; + + if (qcom_geni_earlycon_get_proto(uport->membase) != UART_PROTOCOL) + return -ENXIO; + /* + * Ignore Flow control. + * n = 8. + */ + tx_trans_cfg = UART_CTS_MASK; + bits_per_char = BITS_PER_BYTE; + + /* + * Make an unconditional cancel on the main sequencer to reset + * it else we could end up in data loss scenarios. + */ + qcom_geni_earlycon_poll_tx_done(uport); + qcom_geni_earlycon_abort_rx(uport); + qcom_geni_earlycon_config_packing(uport->membase, BITS_PER_BYTE, + BYTES_PER_FIFO_WORD, false, true, true); + qcom_geni_earlycon_init(uport->membase, DEF_FIFO_DEPTH_WORDS / 2, + DEF_FIFO_DEPTH_WORDS - 2); + qcom_geni_earlycon_select_fifo_mode(uport->membase); + + writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); + writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); + writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); + writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); + writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); + writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); + writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); + + dev->con->write = qcom_geni_earlycon_write; + dev->con->setup = NULL; + qcom_geni_earlycon_enable_read(uport->membase, dev->con); + + return 0; +} + +OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart", + qcom_geni_earlycon_setup); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 0d85b55..739598c 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -107,7 +107,6 @@ #define BYTES_PER_FIFO_WORD 4 struct qcom_geni_private_data { - /* NOTE: earlycon port will have NULL here */ struct uart_driver *drv; u32 poll_cached_bytes; @@ -1139,102 +1138,6 @@ static int qcom_geni_console_setup(struct console *co, char *options) return uart_set_options(uport, co, baud, parity, bits, flow); } -static void qcom_geni_serial_earlycon_write(struct console *con, - const char *s, unsigned int n) -{ - struct earlycon_device *dev = con->data; - - __qcom_geni_serial_console_write(&dev->port, s, n); -} - -#ifdef CONFIG_CONSOLE_POLL -static int qcom_geni_serial_earlycon_read(struct console *con, - char *s, unsigned int n) -{ - struct earlycon_device *dev = con->data; - struct uart_port *uport = &dev->port; - int num_read = 0; - int ch; - - while (num_read < n) { - ch = qcom_geni_serial_get_char(uport); - if (ch == NO_POLL_CHAR) - break; - s[num_read++] = ch; - } - - return num_read; -} - -static void __init qcom_geni_serial_enable_early_read(struct geni_se *se, - struct console *con) -{ - geni_se_setup_s_cmd(se, UART_START_READ, 0); - con->read = qcom_geni_serial_earlycon_read; -} -#else -static inline void qcom_geni_serial_enable_early_read(struct geni_se *se, - struct console *con) { } -#endif - -static struct qcom_geni_private_data earlycon_private_data; - -static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev, - const char *opt) -{ - struct uart_port *uport = &dev->port; - u32 tx_trans_cfg; - u32 tx_parity_cfg = 0; /* Disable Tx Parity */ - u32 rx_trans_cfg = 0; - u32 rx_parity_cfg = 0; /* Disable Rx Parity */ - u32 stop_bit_len = 0; /* Default stop bit length - 1 bit */ - u32 bits_per_char; - struct geni_se se; - - if (!uport->membase) - return -EINVAL; - - uport->private_data = &earlycon_private_data; - - memset(&se, 0, sizeof(se)); - se.base = uport->membase; - if (geni_se_read_proto(&se) != GENI_SE_UART) - return -ENXIO; - /* - * Ignore Flow control. - * n = 8. - */ - tx_trans_cfg = UART_CTS_MASK; - bits_per_char = BITS_PER_BYTE; - - /* - * Make an unconditional cancel on the main sequencer to reset - * it else we could end up in data loss scenarios. - */ - qcom_geni_serial_poll_tx_done(uport); - qcom_geni_serial_abort_rx(uport); - geni_se_config_packing(&se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, - false, true, true); - geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2); - geni_se_select_mode(&se, GENI_SE_FIFO); - - writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); - writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); - writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); - writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); - writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); - writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); - writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); - - dev->con->write = qcom_geni_serial_earlycon_write; - dev->con->setup = NULL; - qcom_geni_serial_enable_early_read(&se, dev->con); - - return 0; -} -OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart", - qcom_geni_serial_earlycon_setup); - static int __init console_register(struct uart_driver *drv) { return uart_register_driver(drv);