From patchwork Mon Jul 3 20:15:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 699190 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 91507C001B0 for ; Mon, 3 Jul 2023 20:15:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230232AbjGCUPy (ORCPT ); Mon, 3 Jul 2023 16:15:54 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34754 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231559AbjGCUPw (ORCPT ); Mon, 3 Jul 2023 16:15:52 -0400 Received: from mail-lf1-x12f.google.com (mail-lf1-x12f.google.com [IPv6:2a00:1450:4864:20::12f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D6B2DE7E for ; Mon, 3 Jul 2023 13:15:41 -0700 (PDT) Received: by mail-lf1-x12f.google.com with SMTP id 2adb3069b0e04-4fb7b2e3dacso7522721e87.0 for ; Mon, 03 Jul 2023 13:15:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1688415340; x=1691007340; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=xwU6U03peid4uuDsGQ1dNshAh7m/oGA1lAGwHfg01NI=; b=ttpOXAWprLMG+DvdPIsQblV2dMi2bg40A66fYJ6jT8ytDYfsV0Eu0dgzBNUrtO4buE J1OKTrQErq9P7IUWqJdWXvW3Grj9hALGwjUsK5RhUw0QIHe3wAs+wLuMuTvrbPoxwbm+ XZenecrOLuTdRLsgmqK/O0Ac1s31QggSCgGmhwVXZzxSVtsbvTYxyPnnxvmiSOQFqO81 tZWhTO3bg2HErNiDVamOC8tJgojWH7LDZ6hZqZ6YKcJiAHX86FhfzKJ1nySB0jp0Yxbq SaokLb2Vv1GDfci4+TFaJT6omRxe3Y7695XCSwb1FsZ/RBiy9OFeREGI8DhdKrEz3BMw nq4g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1688415340; x=1691007340; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xwU6U03peid4uuDsGQ1dNshAh7m/oGA1lAGwHfg01NI=; b=O1oW0Z0dCnaZiKiybhJNGa4CKfpokFcWZhSQNyKttIhOpJIaohKBxzXehIrPYTA1e5 SZE1abgd/BY/M4fkLFbb5FCWDiYvhTh0xzOyI1232f/HsAlHkz6tbobnm2IF3azs/PqD SSnkXZCxF4rDF6PqesZhQ+LHNgxlaLUwRA4+FPlqYFCtAyc7vZq311YMTzeHdafbk9Sb WrkDzRJKLRi6qxzoSXqriyRzORiayV+miBvZZI5gFCBU/sjW/04iQQZ/bo+PvF5HbI3P k1H/E7U+9W9XxQAAlos5p3SDBxOihI6Wl1ySJqrtR82k1cA3c6BOMAIBSJIXODb/NPcY pOuQ== X-Gm-Message-State: ABy/qLZvrQuW0uR2JnwMqQ0kr8Q05ItKVvTQkbO5ScZFq/Z7A+vfSSyp 8gI8bbVk5G2wEHg9hZK3z65wow== X-Google-Smtp-Source: APBJJlE5FROkUFTv7yJiT+ZjaTRVzaVRKUq1xlZVtcgTPdX4SioWXVPsHNcozm0RMLXGvUdsekkOIg== X-Received: by 2002:a05:6512:2510:b0:4f8:5c90:f8a4 with SMTP id be16-20020a056512251000b004f85c90f8a4mr8032438lfb.33.1688415340051; Mon, 03 Jul 2023 13:15:40 -0700 (PDT) Received: from [192.168.1.101] (abyj26.neoplus.adsl.tpnet.pl. [83.9.29.26]) by smtp.gmail.com with ESMTPSA id w27-20020a05651204db00b004fba7edc6cesm1991365lfq.7.2023.07.03.13.15.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 03 Jul 2023 13:15:39 -0700 (PDT) From: Konrad Dybcio Date: Mon, 03 Jul 2023 22:15:28 +0200 Subject: [PATCH v2 4/4] arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs MIME-Version: 1.0 Message-Id: <20230703-topic-8250_qup_icc-v2-4-9ba0a9460be2@linaro.org> References: <20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org> In-Reply-To: <20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org> To: Andy Gross , Bjorn Andersson , Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Greg Kroah-Hartman , Andi Shyti , Georgi Djakov , Odelu Kukatla , Jonathan Marek , Sibi Sankar Cc: Marijn Suijten , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-i2c@vger.kernel.org, linux-pm@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1688415328; l=25779; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=YRQPi1hslmnpu1uXKHQ5JExguT5Giv4sU0ntlbI/EFw=; b=ZnED6idKFZoxJkd52T8ZSbrNTUKX20GhYTjiHI3sldYVuOdgofz4yCv4GH1IrEGU4Rn+7DSES AWeagIwCTsmCQcq6PLaWAWrAmykYq9bimuVeYSpqHQ3JRRU/NZQI649 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org Describe the interconnect paths related to QUPs and add the power-domains powering them. This is required for icc sync_state, as otherwise QUP access is gated. Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 286 +++++++++++++++++++++++++++++++++++ 1 file changed, 286 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1efa07f2caff..5909f04c81de 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -370,6 +370,12 @@ CLUSTER_SLEEP_0: cluster-sleep-0 { }; }; + qup_virt: interconnect-qup-virt { + compatible = "qcom,sm8250-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -1022,6 +1028,13 @@ i2c14: i2c@880000 { dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1038,6 +1051,12 @@ spi14: spi@880000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1054,6 +1073,13 @@ i2c15: i2c@884000 { dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1070,6 +1096,12 @@ spi15: spi@884000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1086,6 +1118,13 @@ i2c16: i2c@888000 { dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1102,6 +1141,12 @@ spi16: spi@888000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1118,6 +1163,13 @@ i2c17: i2c@88c000 { dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1134,6 +1186,12 @@ spi17: spi@88c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1149,6 +1207,10 @@ uart17: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1163,6 +1225,13 @@ i2c18: i2c@890000 { dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1179,6 +1248,12 @@ spi18: spi@890000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1194,6 +1269,10 @@ uart18: serial@890000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1208,6 +1287,13 @@ i2c19: i2c@894000 { dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, <&gpi_dma2 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1224,6 +1310,12 @@ spi19: spi@894000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1276,6 +1368,13 @@ i2c0: i2c@980000 { dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1292,6 +1391,12 @@ spi0: spi@980000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1308,6 +1413,13 @@ i2c1: i2c@984000 { dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1324,6 +1436,12 @@ spi1: spi@984000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1340,6 +1458,13 @@ i2c2: i2c@988000 { dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1356,6 +1481,12 @@ spi2: spi@988000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1371,6 +1502,10 @@ uart2: serial@988000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1385,6 +1520,13 @@ i2c3: i2c@98c000 { dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1401,6 +1543,12 @@ spi3: spi@98c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1417,6 +1565,13 @@ i2c4: i2c@990000 { dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1433,6 +1588,12 @@ spi4: spi@990000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1449,6 +1610,13 @@ i2c5: i2c@994000 { dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1465,6 +1633,12 @@ spi5: spi@994000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1481,6 +1655,13 @@ i2c6: i2c@998000 { dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1497,6 +1678,12 @@ spi6: spi@998000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1512,6 +1699,10 @@ uart6: serial@998000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1526,6 +1717,13 @@ i2c7: i2c@99c000 { dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1542,6 +1740,12 @@ spi7: spi@99c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1591,6 +1795,13 @@ i2c8: i2c@a80000 { dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1607,6 +1818,12 @@ spi8: spi@a80000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1623,6 +1840,13 @@ i2c9: i2c@a84000 { dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1639,6 +1863,12 @@ spi9: spi@a84000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1655,6 +1885,13 @@ i2c10: i2c@a88000 { dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1671,6 +1908,12 @@ spi10: spi@a88000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1687,6 +1930,13 @@ i2c11: i2c@a8c000 { dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1703,6 +1953,12 @@ spi11: spi@a8c000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1719,6 +1975,13 @@ i2c12: i2c@a90000 { dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1735,6 +1998,12 @@ spi12: spi@a90000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1750,6 +2019,10 @@ uart12: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1764,6 +2037,13 @@ i2c13: i2c@a94000 { dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1780,6 +2060,12 @@ spi13: spi@a94000 { dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled";