diff mbox series

[v2,06/16] serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield

Message ID 20231221231823.2327894-7-hugo@hugovil.com
State New
Headers show
Series serial: sc16is7xx: fixes, cleanups and improvements | expand

Commit Message

Hugo Villeneuve Dec. 21, 2023, 11:18 p.m. UTC
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Replace the explicit sc16is7xx_lines bitfield declaration with the generic
macro DECLARE_BITMAP() to reserve just enough memory to contain all
required bits.

This also improves code self-documentation by showing the maximum number
of bits required.

This conversion now makes sc16is7xx_lines an array, so drop the "&" before
sc16is7xx_lines in all bit access functions.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/tty/serial/sc16is7xx.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 8d257208cbf3..42e1b4c70ed6 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -347,7 +347,7 @@  struct sc16is7xx_port {
 	struct sc16is7xx_one		p[];
 };
 
-static unsigned long sc16is7xx_lines;
+static DECLARE_BITMAP(sc16is7xx_lines, SC16IS7XX_MAX_DEVS);
 
 static struct uart_driver sc16is7xx_uart = {
 	.owner		= THIS_MODULE,
@@ -1536,7 +1536,7 @@  static int sc16is7xx_probe(struct device *dev,
 		     SC16IS7XX_IOCONTROL_SRESET_BIT);
 
 	for (i = 0; i < devtype->nr_uart; ++i) {
-		s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines,
+		s->p[i].port.line = find_first_zero_bit(sc16is7xx_lines,
 							SC16IS7XX_MAX_DEVS);
 		if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) {
 			ret = -ERANGE;
@@ -1587,7 +1587,7 @@  static int sc16is7xx_probe(struct device *dev,
 		if (ret)
 			goto out_ports;
 
-		set_bit(s->p[i].port.line, &sc16is7xx_lines);
+		set_bit(s->p[i].port.line, sc16is7xx_lines);
 
 		/* Enable EFR */
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG,
@@ -1646,7 +1646,7 @@  static int sc16is7xx_probe(struct device *dev,
 
 out_ports:
 	for (i = 0; i < devtype->nr_uart; i++)
-		if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines))
+		if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
 			uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 
 	kthread_stop(s->kworker_task);
@@ -1669,7 +1669,7 @@  static void sc16is7xx_remove(struct device *dev)
 
 	for (i = 0; i < s->devtype->nr_uart; i++) {
 		kthread_cancel_delayed_work_sync(&s->p[i].ms_work);
-		if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines))
+		if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
 			uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 		sc16is7xx_power(&s->p[i].port, 0);
 	}