diff mbox series

[v12,4/7] serial: sh-sci: Replace direct stop_rx/stop_tx calls with port ops in sci_shutdown()

Message ID 20250617134504.126313-5-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add support for RSCI driver | expand

Commit Message

Prabhakar June 17, 2025, 1:45 p.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Replace direct calls to sci_stop_rx() and sci_stop_tx() with port ops
callbacks in sci_shutdown(). This enables the RSCI driver, which reuses
the SCI core but implements its own stop_rx and stop_tx logic, to reuse
sci_shutdown() without duplicating code.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/tty/serial/sh-sci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1c356544a832..5c4283ce542d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2289,8 +2289,8 @@  void sci_shutdown(struct uart_port *port)
 	mctrl_gpio_disable_ms_sync(to_sci_port(port)->gpios);
 
 	uart_port_lock_irqsave(port, &flags);
-	sci_stop_rx(port);
-	sci_stop_tx(port);
+	s->port.ops->stop_rx(port);
+	s->port.ops->stop_tx(port);
 	s->ops->shutdown_complete(port);
 	uart_port_unlock_irqrestore(port, flags);