diff mbox series

[V3,1/2] serial: exar: Revert "serial: exar: Add support for Sealevel 7xxxC serial cards"

Message ID 9b22e58e-182e-fc43-2a08-c01847ff427c@sealevel.com
State Superseded
Headers show
Series [V3,1/2] serial: exar: Revert "serial: exar: Add support for Sealevel 7xxxC serial cards" | expand

Commit Message

Matthew Howell Aug. 31, 2023, 7:43 p.m. UTC 
From: Matthew Howell <matthew.howell@sealevel.com>

Hardware ID of Sealevel 7xxxC cards changed prior to release which 
has rendered the previous commit redundant.

Revert "serial: exar: Add support for Sealevel 7xxxC serial cards"

This reverts commit 14ee78d5932afeb710c8305196a676a715bfdea8.

Link: 
https://lore.kernel.org/linux-serial/687157c-3d18-e18b-1936-f3f5b98ae760@sealevel.com/

Fixes: 14ee78d5932a ("Add support for Sealevel 7xxxC serial cards")
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
---
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 077c3ba3539e..3886f78ecbbf 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -47,12 +47,6 @@ 
 #define PCI_SUBDEVICE_ID_USR_2980		0x0128
 #define PCI_SUBDEVICE_ID_USR_2981		0x0129
 
-#define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
-#define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
-#define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
-#define PCI_DEVICE_ID_SEALEVEL_780xC		0x1008
-#define PCI_DEVICE_ID_SEALEVEL_716xC		0x1010
-
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
@@ -652,8 +646,6 @@  exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
 	else if (board->num_ports)
 		nr_ports = board->num_ports;
-	else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
-		nr_ports = pcidev->device & 0xff;
 	else
 		nr_ports = pcidev->device & 0x0f;
 
@@ -893,12 +885,6 @@  static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
-
-	EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);