mbox series

[PATCHv4,0/6] GE Healthcare PPD firmware upgrade driver for ACHC

Message ID 20210609151235.48964-1-sebastian.reichel@collabora.com
Headers show
Series GE Healthcare PPD firmware upgrade driver for ACHC | expand

Message

Sebastian Reichel June 9, 2021, 3:12 p.m. UTC
Hi,

The PPD has a secondary processor (NXP Kinetis K20), which can be
programmed from the main system. It is connected to the main processor
by having it's EzPort interface connected to the SPI bus. Currently
both (normal and EzPort) interfaces are simply exposed to userspace.
This does not work for the EzPort, since EzPort usage requires a device
reset. The proper solution is to do the flashing from kernel space
with properly timed toggling of EzPort chip-select and reset line. In
PATCHv2 it was suggested, that this should happen via an SPI ancillary
device, so this is how it has been implemented now.

Changes since PATCHv3:
 * https://lore.kernel.org/lkml/20210528113346.37137-1-sebastian.reichel@collabora.com/
 * Add Rob's Acked-by to 2nd patch
 * use GPL-2-only instead of GPL-2+
 * use %zu for printing a size_t
 * use driver's .dev_groups to register sysfs group
 * Add sysfs property documentation
 * split EzPort and ACHC drivers into separate patches
 * drop minItems/maxItems from achc binding, which seems to fix the problems
   reported by dt_binding_check. The information of two items being required
   is implied by the explicit item list.
 * drop spidev functionality for the main SPI interface. The current firmware
   communicates via UART and adding spidev support is complex. If future firmware
   releases start using it, spidev support for the main interface can be added
   later.

Changes since PATCHv2:
 * https://lore.kernel.org/lkml/20180327135259.30890-1-sebastian.reichel@collabora.co.uk/
 * add SPI core support for ancillary devices
 * modify ACHC binding to make use of ancillary device
 * rewrite driver to use ancillary device
 * rebased to 5.13-rc1

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20180320172201.2065-1-sebastian.reichel@collabora.co.uk/
 * split DT binding update into its own patch
 * add sysfs attribute documentation
 * fix problem reported by kbuild test robot

-- Sebastian

Sebastian Reichel (6):
  spi: add ancillary device support
  spi: dt-bindings: support devices with multiple chipselects
  dt-bindings: misc: ge-achc: Convert to DT schema format
  ARM: dts: imx53-ppd: Fix ACHC entry
  misc: nxp-ezport: introduce EzPort support
  misc: gehc-achc: new driver

 .../ABI/testing/sysfs-driver-ge-achc          |   9 +
 .../devicetree/bindings/misc/ge-achc.txt      |  26 -
 .../devicetree/bindings/misc/ge-achc.yaml     |  65 +++
 .../bindings/spi/spi-controller.yaml          |   7 +-
 arch/arm/boot/dts/imx53-ppd.dts               |  23 +-
 drivers/misc/Kconfig                          |  15 +
 drivers/misc/Makefile                         |   2 +
 drivers/misc/gehc-achc.c                      | 136 +++++
 drivers/misc/nxp-ezport.c                     | 476 ++++++++++++++++++
 drivers/spi/spi.c                             | 139 +++--
 drivers/spi/spidev.c                          |   1 -
 include/linux/platform_data/nxp-ezport.h      |   9 +
 include/linux/spi/spi.h                       |   2 +
 13 files changed, 839 insertions(+), 71 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-ge-achc
 delete mode 100644 Documentation/devicetree/bindings/misc/ge-achc.txt
 create mode 100644 Documentation/devicetree/bindings/misc/ge-achc.yaml
 create mode 100644 drivers/misc/gehc-achc.c
 create mode 100644 drivers/misc/nxp-ezport.c
 create mode 100644 include/linux/platform_data/nxp-ezport.h

Comments

Mark Brown June 22, 2021, 3:14 p.m. UTC | #1
On Wed, 9 Jun 2021 17:12:29 +0200, Sebastian Reichel wrote:
> The PPD has a secondary processor (NXP Kinetis K20), which can be

> programmed from the main system. It is connected to the main processor

> by having it's EzPort interface connected to the SPI bus. Currently

> both (normal and EzPort) interfaces are simply exposed to userspace.

> This does not work for the EzPort, since EzPort usage requires a device

> reset. The proper solution is to do the flashing from kernel space

> with properly timed toggling of EzPort chip-select and reset line. In

> PATCHv2 it was suggested, that this should happen via an SPI ancillary

> device, so this is how it has been implemented now.

> 

> [...]


Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/6] spi: add ancillary device support
      commit: 0c79378c01999bd60057c475f163ec807c24891f
[2/6] spi: dt-bindings: support devices with multiple chipselects
      commit: d90609a4b72dbfe42da2a55f3078c35e669948e0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark