mbox series

[v4,0/3] Stacked/parallel memories bindings

Message ID 20211210201039.729961-1-miquel.raynal@bootlin.com
Headers show
Series Stacked/parallel memories bindings | expand

Message

Miquel Raynal Dec. 10, 2021, 8:10 p.m. UTC 
Hello Rob, Mark, Tudor & Pratyush,

Here is a fourth versions for these bindings, which applies on top of
Pratyush's work:
https://lore.kernel.org/all/20211109181911.2251-1-p.yadav@ti.com/

Cheers,
Miquèl

Changes in v4:
* Changed the type of properties to uint64-arrays in order to be able to
  describe the size of each element in the array.
* Updated the example accordingly.

Changes in v3:
* Rebased on top of Pratyush's recent changes.
* Dropped the commit allowing to provide two reg entries on the node
  name.
* Dropped the commit referencing spi-controller.yaml from
  jedec,spi-nor.yaml, now replaced by spi-peripheral-props.yaml and
  already done in Pratyush's series.
* Added Rob's Ack.
* Enhanced a commit message.
* Moved the new properties to the new SPI peripheral binding file.

Changes in v2:
* Dropped the dtc changes for now.
* Moved the properties in the device's nodes, not the controller's.
* Dropped the useless #address-cells change.
* Added a missing "minItems".
* Moved the new properties in the spi-controller.yaml file.
* Added an example using two stacked memories in the
  spi-controller.yaml file.
* Renamed the properties to drop the Xilinx prefix.
* Added a patch to fix the spi-nor jedec yaml file.

Miquel Raynal (3):
  dt-bindings: mtd: spi-nor: Allow two CS per device
  spi: dt-bindings: Describe stacked/parallel memories modes
  spi: dt-bindings: Add an example with two stacked flashes

 .../bindings/mtd/jedec,spi-nor.yaml           |  3 +-
 .../bindings/spi/spi-controller.yaml          |  7 +++++
 .../bindings/spi/spi-peripheral-props.yaml    | 29 +++++++++++++++++++
 3 files changed, 38 insertions(+), 1 deletion(-)