mbox series

[v2,0/2] spi: realtek-rtl: two small improvements

Message ID 20220728152118.1429161-1-martin.blumenstingl@googlemail.com
Headers show
Series spi: realtek-rtl: two small improvements | expand

Message

Martin Blumenstingl July 28, 2022, 3:21 p.m. UTC
This is a successor to my single patch [0] "spi: realtek-rtl: Fix
clearing some register bits"

Changes since v1 at [0]:
- Added new patch to enable compile testing for the spi-realtek-rtl
  driver. This makes it easier to verify coding style changes (such as
  patch #2 in this series) where the binary result is not supposed to
  change.
- Updated the original patch to drop the RTL_SPI_SFCSR_CS change as
  it's not fully clear why that code is written as-is (and due to
  lack of hardware I am unable to runtime test the changes). Also
  move the ~ operator from the RTL_SPI_SFCSR_LEN_MASK definition to
  the place where it's used. Thanks to Sander for spotting the mistake
  in my initial patch!


[0] https://lore.kernel.org/lkml/78673dc7438a03bf9ed0103a935abf0172f146ce.camel@svanheule.net/T/


Martin Blumenstingl (2):
  spi: realtek-rtl: Add compile testing support
  spi: realtek-rtl: Improve readability when clearing the size mask

 drivers/spi/Kconfig           | 9 +++++++++
 drivers/spi/Makefile          | 2 +-
 drivers/spi/spi-realtek-rtl.c | 4 ++--
 3 files changed, 12 insertions(+), 3 deletions(-)

Comments

Sander Vanheule July 28, 2022, 6:26 p.m. UTC | #1
Hi Martin,

On Thu, 2022-07-28 at 17:21 +0200, Martin Blumenstingl wrote:
> Add support for compile testing the spi-realtek-rtl driver to increase
> build testing coverage.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/spi/Kconfig  | 9 +++++++++
>  drivers/spi/Makefile | 2 +-
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 8e550269d488..d8b55efb05d5 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -969,6 +969,15 @@ config SPI_MXS
>         help
>           SPI driver for Freescale MXS devices.
>  
> +config SPI_REALTEK_RTL
> +       tristate "Realtek RTL SPI controller"
> +       depends on HAS_IOMEM

I think this is already an implied dependency, by virtue of this symbol being
available only when CONFIG_SPI=y.

> +       depends on MACH_REALTEK_RTL || COMPILE_TEST
> +       default MACH_REALTEK_RTL
> +       help
> +         SPI driver for the hardware found on Realtek RLTL8380, RTL8382,
> +         RTL8391, RTL8392 and RTL8393 SoCs.
> +

Could you add how the module will be named be to the help text? See for example
CONFIG_SPI_DLN2.

Best,
Sander

>  config SPI_TEGRA210_QUAD
>         tristate "NVIDIA Tegra QSPI Controller"
>         depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 18bf3d8c6df7..9fe4a2aa0fd7 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -105,7 +105,7 @@ obj-$(CONFIG_SPI_QUP)                       += spi-qup.o
>  obj-$(CONFIG_SPI_ROCKCHIP)             += spi-rockchip.o
>  obj-$(CONFIG_SPI_ROCKCHIP_SFC)         += spi-rockchip-sfc.o
>  obj-$(CONFIG_SPI_RB4XX)                        += spi-rb4xx.o
> -obj-$(CONFIG_MACH_REALTEK_RTL)         += spi-realtek-rtl.o
> +obj-$(CONFIG_SPI_REALTEK_RTL)          += spi-realtek-rtl.o
>  obj-$(CONFIG_SPI_RPCIF)                        += spi-rpc-if.o
>  obj-$(CONFIG_SPI_RSPI)                 += spi-rspi.o
>  obj-$(CONFIG_SPI_S3C24XX)              += spi-s3c24xx-hw.o