| Message ID | 20250522-james-nxp-spi-v2-0-bea884630cfb@linaro.org |
|---|---|
| Headers | show |
| Series | spi: spi-fsl-dspi: DSPI support for NXP S32G platforms | expand |
On Thu, 22 May 2025 15:51:29 +0100, James Clark wrote: > DT and driver changes for DSPI on S32G platforms. First 3 commits are > fixes for various edge cases which also apply to other platforms. > Remaining commits add new S32G registers and device settings, some S32G > specific fixes and then finally add the DT compatibles and binding docs. > > Tested in both host and target mode on S32G-VNP-RDB3 by transferring to > an external device over spi1 using spidev_test.c > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [01/14] spi: spi-fsl-dspi: restrict register range for regmap access commit: 283ae0c65e9c592f4a1ba4f31917f5e766da7f31 [02/14] spi: spi-fsl-dspi: Halt the module after a new message transfer commit: 8a30a6d35a11ff5ccdede7d6740765685385a917 [03/14] spi: spi-fsl-dspi: Reset SR flags before sending a new message commit: 7aba292eb15389073c7f3bd7847e3862dfdf604d All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
DT and driver changes for DSPI on S32G platforms. First 3 commits are fixes for various edge cases which also apply to other platforms. Remaining commits add new S32G registers and device settings, some S32G specific fixes and then finally add the DT compatibles and binding docs. Tested in both host and target mode on S32G-VNP-RDB3 by transferring to an external device over spi1 using spidev_test.c --- Changes in v2: - Add trailing commas to lists - Line length fixes - DT coding style changes - Remove fake "rohm,dh2228fv" device for testing - Improve some commit messages - Put all fixes commits first and add fixes: tags - Link to v1: https://lore.kernel.org/r/20250509-james-nxp-spi-v1-0-32bfcd2fea11@linaro.org --- Andra-Teodora Ilie (1): spi: spi-fsl-dspi: Enable modified transfer protocol on S32G Bogdan-Gabriel Roman (1): spi: spi-fsl-dspi: Halt the module after a new message transfer Ciprian Marian Costea (2): dt-bindings: spi: dspi: Add S32G support spi: spi-fsl-dspi: Enable support for S32G platforms James Clark (2): spi: spi-fsl-dspi: Re-use one volatile regmap for both device types spi: spi-fsl-dspi: Define regmaps per device Larisa Grigore (7): spi: spi-fsl-dspi: restrict register range for regmap access spi: spi-fsl-dspi: Reset SR flags before sending a new message spi: spi-fsl-dspi: Add config and regmaps for S32G platforms spi: spi-fsl-dspi: Avoid setup_accel logic for DMA transfers spi: spi-fsl-dspi: Use DMA for S32G controller in target mode spi: spi-fsl-dspi: Reinitialize DSPI regs after resuming for S32G arm64: dts: Add DSPI entries for S32G platforms Marius Trifu (1): spi: spi-fsl-dspi: Use spi_alloc_target for target .../devicetree/bindings/spi/fsl,dspi.yaml | 18 + arch/arm64/boot/dts/freescale/s32g2.dtsi | 78 +++++ arch/arm64/boot/dts/freescale/s32g3.dtsi | 78 +++++ arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi | 83 +++++ arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi | 83 +++++ drivers/spi/Kconfig | 4 +- drivers/spi/spi-fsl-dspi.c | 362 +++++++++++++++------ 7 files changed, 600 insertions(+), 106 deletions(-) --- base-commit: d608703fcdd9e9538f6c7a0fcf98bf79b1375b60 change-id: 20250325-james-nxp-spi-caf1e2099231 Best regards,