From patchwork Fri May 12 17:07:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vijaya Krishna Nivarthi X-Patchwork-Id: 682317 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1A186C7EE26 for ; Fri, 12 May 2023 17:08:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237856AbjELRH7 (ORCPT ); Fri, 12 May 2023 13:07:59 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55270 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237779AbjELRH5 (ORCPT ); Fri, 12 May 2023 13:07:57 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8A9C92719; Fri, 12 May 2023 10:07:56 -0700 (PDT) Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 34CDuH7a001192; Fri, 12 May 2023 17:07:52 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=xAGURud0FHOml/AL8xXzgd71njcCob04XNk7Q4ItzGY=; b=RNCJDmjbYCjZ0TEWVeH46uH5QCaFhkaTCBDF2XQ8b/rJ7D4DYLmmIK7Zi6p41ZFrSvz2 jJ6udhMaJF5G3zLTX7siQH2y3r18SksniK1J3Gr987cJG0BawY7zkTvyH4OE9QpF/1hR Hu6TbsHhlQexYXDgmfBJ2ODSEYzizpL+PRFkMN4JJl2J3o8rosBcAHkEcFl3JEq0DBrb 7ePr8L0qi6qnElR+DtoJs8/WJRfDE81ZCmFuwKlSvRPoOAB/dPj5kFil6SfXaJxdMNel Okwq/hguV84KCXvvaNYUrLq6MEoPfN9i/phecafwmN1QpRBfyLcZVvvZeI82XyGpK11k xw== Received: from apblrppmta01.qualcomm.com (blr-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.18.19]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qhpsdreqj-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 12 May 2023 17:07:52 +0000 Received: from pps.filterd (APBLRPPMTA01.qualcomm.com [127.0.0.1]) by APBLRPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 34CH7nXI011264; Fri, 12 May 2023 17:07:49 GMT Received: from pps.reinject (localhost [127.0.0.1]) by APBLRPPMTA01.qualcomm.com (PPS) with ESMTP id 3qdy59v8pu-1; Fri, 12 May 2023 17:07:49 +0000 Received: from APBLRPPMTA01.qualcomm.com (APBLRPPMTA01.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 34CH7mOV011257; Fri, 12 May 2023 17:07:49 GMT Received: from hu-sgudaval-hyd.qualcomm.com (hu-vnivarth-hyd.qualcomm.com [10.213.111.166]) by APBLRPPMTA01.qualcomm.com (PPS) with ESMTP id 34CH7mtD011256; Fri, 12 May 2023 17:07:48 +0000 Received: by hu-sgudaval-hyd.qualcomm.com (Postfix, from userid 3994820) id 3FC104B21; Fri, 12 May 2023 22:37:48 +0530 (+0530) From: Vijaya Krishna Nivarthi To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, broonie@kernel.org, quic_vnivarth@quicinc.com, dianders@chromium.org, linux-arm-msm@vger.kernel.org, linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org Cc: quic_msavaliy@quicinc.com, mka@chromium.org, swboyd@chromium.org, quic_vtanuku@quicinc.com, quic_ptalari@quicinc.com Subject: [PATCH 1/2] soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma() Date: Fri, 12 May 2023 22:37:44 +0530 Message-Id: <1683911265-3395-2-git-send-email-quic_vnivarth@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1683911265-3395-1-git-send-email-quic_vnivarth@quicinc.com> References: <1683911265-3395-1-git-send-email-quic_vnivarth@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 32zmDIIbrIm-1dSVTPXevgi0WllZtGu9 X-Proofpoint-ORIG-GUID: 32zmDIIbrIm-1dSVTPXevgi0WllZtGu9 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-12_10,2023-05-05_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 spamscore=0 mlxscore=0 impostorscore=0 malwarescore=0 lowpriorityscore=0 suspectscore=0 phishscore=0 priorityscore=1501 mlxlogscore=999 bulkscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2304280000 definitions=main-2305120142 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The geni_se_xx_dma_prep() interfaces necessarily do DMA mapping before initiating DMA transfers. This is not suitable for spi where framework is expected to handle map/unmap. Expose new interfaces geni_se_xx_init_dma() which do only DMA transfer. Signed-off-by: Vijaya Krishna Nivarthi --- drivers/soc/qcom/qcom-geni-se.c | 67 +++++++++++++++++++++++++++++----------- include/linux/soc/qcom/geni-se.h | 4 +++ 2 files changed, 53 insertions(+), 18 deletions(-) diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index 795a2e1..adfcd6e 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -682,6 +682,30 @@ EXPORT_SYMBOL(geni_se_clk_freq_match); #define GENI_SE_DMA_EOT_EN BIT(1) #define GENI_SE_DMA_AHB_ERR_EN BIT(2) #define GENI_SE_DMA_EOT_BUF BIT(0) + +/** + * geni_se_tx_init_dma() - Initiate TX DMA transfer on the serial engine + * @se: Pointer to the concerned serial engine. + * @iova: Pointer to store the mapped DMA address. + * @len: Length of the TX buffer. + * + * This function is used to initiate DMA TX transfer. + */ +void geni_se_tx_init_dma(struct geni_se *se, dma_addr_t *iova, size_t len) +{ + u32 val; + + val = GENI_SE_DMA_DONE_EN; + val |= GENI_SE_DMA_EOT_EN; + val |= GENI_SE_DMA_AHB_ERR_EN; + writel_relaxed(val, se->base + SE_DMA_TX_IRQ_EN_SET); + writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_TX_PTR_L); + writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_TX_PTR_H); + writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR); + writel(len, se->base + SE_DMA_TX_LEN); +} +EXPORT_SYMBOL(geni_se_tx_init_dma); + /** * geni_se_tx_dma_prep() - Prepare the serial engine for TX DMA transfer * @se: Pointer to the concerned serial engine. @@ -697,7 +721,6 @@ int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len, dma_addr_t *iova) { struct geni_wrapper *wrapper = se->wrapper; - u32 val; if (!wrapper) return -EINVAL; @@ -706,17 +729,34 @@ int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len, if (dma_mapping_error(wrapper->dev, *iova)) return -EIO; + geni_se_tx_init_dma(se, iova, len); + return 0; +} +EXPORT_SYMBOL(geni_se_tx_dma_prep); + +/** + * geni_se_rx_init_dma() - Initiate RX DMA transfer on the serial engine + * @se: Pointer to the concerned serial engine. + * @iova: Pointer to store the mapped DMA address. + * @len: Length of the RX buffer. + * + * This function is used to initiate DMA RX transfer. + */ +void geni_se_rx_init_dma(struct geni_se *se, dma_addr_t *iova, size_t len) +{ + u32 val; + val = GENI_SE_DMA_DONE_EN; val |= GENI_SE_DMA_EOT_EN; val |= GENI_SE_DMA_AHB_ERR_EN; - writel_relaxed(val, se->base + SE_DMA_TX_IRQ_EN_SET); - writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_TX_PTR_L); - writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_TX_PTR_H); - writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR); - writel(len, se->base + SE_DMA_TX_LEN); - return 0; + writel_relaxed(val, se->base + SE_DMA_RX_IRQ_EN_SET); + writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_RX_PTR_L); + writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_RX_PTR_H); + /* RX does not have EOT buffer type bit. So just reset RX_ATTR */ + writel_relaxed(0, se->base + SE_DMA_RX_ATTR); + writel(len, se->base + SE_DMA_RX_LEN); } -EXPORT_SYMBOL(geni_se_tx_dma_prep); +EXPORT_SYMBOL(geni_se_rx_init_dma); /** * geni_se_rx_dma_prep() - Prepare the serial engine for RX DMA transfer @@ -733,7 +773,6 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, dma_addr_t *iova) { struct geni_wrapper *wrapper = se->wrapper; - u32 val; if (!wrapper) return -EINVAL; @@ -742,15 +781,7 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, if (dma_mapping_error(wrapper->dev, *iova)) return -EIO; - val = GENI_SE_DMA_DONE_EN; - val |= GENI_SE_DMA_EOT_EN; - val |= GENI_SE_DMA_AHB_ERR_EN; - writel_relaxed(val, se->base + SE_DMA_RX_IRQ_EN_SET); - writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_RX_PTR_L); - writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_RX_PTR_H); - /* RX does not have EOT buffer type bit. So just reset RX_ATTR */ - writel_relaxed(0, se->base + SE_DMA_RX_ATTR); - writel(len, se->base + SE_DMA_RX_LEN); + geni_se_rx_init_dma(se, iova, len); return 0; } EXPORT_SYMBOL(geni_se_rx_dma_prep); diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h index c55a0bc..7a2a546 100644 --- a/include/linux/soc/qcom/geni-se.h +++ b/include/linux/soc/qcom/geni-se.h @@ -490,9 +490,13 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq, unsigned int *index, unsigned long *res_freq, bool exact); +void geni_se_tx_init_dma(struct geni_se *se, dma_addr_t *iova, size_t len); + int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len, dma_addr_t *iova); +void geni_se_rx_init_dma(struct geni_se *se, dma_addr_t *iova, size_t len); + int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, dma_addr_t *iova);